Everything posted by Lalo
-
How to jump start a car without jumper cables
That does it! I really need to pick up that Saiga in .223!
-
Is a free float rail necessary?
OP, you have options. This thread talks about adding a 2 piece FF rail without removing your FSB http://njgunforums.com/forum/index.php/topic/61461-2-piece-free-float-drop-in-rails/ http://njgunforums.com/forum/index.php/topic/60836-extended-quad-rail-help-anyone-make-a/ This thread talks about options for FF rails that use the standard barrel nut. In your case, since you have no muzzle device, you can easily slip the FSB out and replace it with a low profile gas block instead of shaving down the FSB. Likewise, you can stil acquire any other FF rail that use a proprietary barrel nut but you'll need the tools and knowhow to swap them out. http://njgunforums.com/forum/index.php/topic/52111-free-float-rail-suggestions/ I think the lease expensive solution for you would be get a FF rail that uses the standard barrel nut and shave the FSB off yourself. Forget about threading the barrel otherwise you'll be sinking too much money into it.
-
Converted Saiga 223 - $549
Does anyone know of any FFL in Northern NJ that would do the transfer AND pin the 30 round mag? I guess I could always have J&G keep the mag...
-
Converted Saiga 223 - $549
This has sparked my interest. Here is the thread about the AR adapters. http://njgunforums.com/forum/index.php/topic/62781-new-mag-adapter-for-ak-to-ar-mags-223556/
-
M&P 15-22 Barrel Shroud
Most from the factory NJ compliant 15-22's I've seen don't have threaded barrels. My only hesitation with this item is the question about pinning the adapter and/or shroud and if the shroud does in fact suppress any flash.
-
M&P 15-22 Barrel Shroud
So in order to install these you either need a threaded barrel or a thread adapter correct?
-
Primary Arms: Mcro Dot With Riser $60
Don't need either.
-
Primary Arms: Mcro Dot With Riser $60
Yes it can via 4 bolts from the bottom. It takes any Aimpoint Micro riser as well. I picked up a Larue mount and it fit perfectly.
-
Primary Arms: Mcro Dot With Riser $60
Had to grab one for that price. Been running an MD-10 for a couple years now with no loss of zero and no issues. ETA - My only problem with this RDS is the 6 o'clock LED position. Makes it almost impossible to get that lower 1/3 co-witness. They sell other mounts that will get you an absolute co-witness that work really well.
-
Just got my Mav 88
Bring it to the Clinton shootout this Saturday to try it out...
-
Shotgun Shootout! Nov 30th at Clinton WMA
I'm definitely going to make this one.
-
Complete upper so many choices!
Buy from Palmetto State Armory with confidence. http://palmettostatearmory.com/index.php/black-friday/black-friday-barreled-upper-assemblies.html I wouldn't use a product from RGUNS even if it was free...
-
Can I ask a ridiculous question?
Read... http://www.ar15.com/forums/f_3/123_AR_15___M_16_Retro_Forum.html
-
What are your top 5 AR mods/accesories?
Not necessarily in order of importance, but the order in which I dress up an AR I'm building 1. BUIS - Sure they're just back-up sights, but if/when your primary optic fails, it pays to have a good set of BUIS. 2. Flashlight - 2nd on my list because you NEED a light to ID threats at night regardless of all the other goodies you have on your AR. 3. Magpul BAD lever - I've gotten used to utilizing this during training classes. Makes reloads and clearing malfunctions easier/faster. 4. BCM Charging Handle - Extended handle is almost a must nowadays. 5. Magpul ASAP/RSA/MS3 - Again, I've gotten used to using this sling setup across all my AR's during training classes, it works for me. 6. Optic - You get what you pay for. If you cant afford a good optic, save your $ for one, it's worth it. 7. Pistol Grip - I'm liking the MOE+ grip nowadays. Find something comfortable for yourself. 8. Stock - Need something comfortable for a snug nose to charging handle cheek weld. 9. Forend - Vertical grip, angled fore-grip, handstops. 10. Break/Comp - Different models behave differently, find one you like.
-
List of NJ-friendly and NJ-unfriendly online firearm retailers
Good thread. This should be stickied.
-
New AR Trigger - Tac-con 3MR trigger group
Gotcha, my mistake.
-
New AR Trigger - Tac-con 3MR trigger group
I also doubt this will be legal in NJ. If they're expecting one round per trigger pull, how many rounds will this fire off if you pull the trigger twice? 3? 4 if you release the second trigger pull. I would save my $500 and put that in my "moving the hell out of NJ" fund.
-
New AR Trigger - Tac-con 3MR trigger group
So one round on trigger pull, one round on reset? Hmm... sounds interesting but I'll pass. I know the full auto buzz will go away as soon as I blow through a couple boxes of ammo in under a minute. Cool toy though!
-
Anderson lowers at PSA $49.99
No personal experience with them, but read this. http://www.ar15.com/forums/t_3_118/574911_Anderson_manufacturing_anyone_have_one_.html
-
The Walking Dead
LOL, just caught that now. Too funny. Maybe he was taking aim at some of the walkers towards the back and needed to be a bit more stable. It happens at the 1 minute mark on the first video on top. It happens at the same time that he shoots off a burst as he was still raising the muzzle to aim. I'm with Alec in that I've accepted that their interaction with firearms is not going to be that realistic and will often look bad. I think they just don't have the budget to hire an expert to train them and correct them when they do something stupid. But damn, some of the things they do even a novice gun owner could point out.
-
OBRAMS December 21,2013 - Rimfire Tactical Precision Match
Yeah, those things look really small. Maybe too small for an M&P 15-22 as I haven't tried ammo that will consistently give me good groups at 50yds scoped & bipod.
-
The Walking Dead
Caught Sunday's episode last night on DVR. Real good episode! What are the chances of the Governor turning his life around and maybe teaming up with Rick? I have a feeling something bad is going to happen with the 3 girls he was traveling with and is going to ask Rick for help. So far this season has not disappointed me. Hope they keep it up.
-
Another Rocket Launch Tonight
Was outside but still missed it. Dammit!
-
Lower Parts Kit - $29.99
Not the best LPK, but for $40 you cant beat that. Everyone should have an extra set.
-
Rabid Racoon
Really hope that thing hasn't been sitting around for 3 days...