Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Lalo

Members
  • Joined

  • Last visited

Everything posted by Lalo

  1. Everyone should have a spare. This is a good deal. Not Carpenter 158, but good for the average plinker.
  2. What kind of CCI, standard velocity?
  3. Dicks Rockaway has 12g Rem gun club for $6/box. Also clays we're buy one get the other 50% off.
  4. Weather for Clinton tomorrow says Partly cloudy, 20% chance of rain. High 70, Low 52. That's pretty good for me! A little drizzle wont melt my shotty. I'm looking to get there by 9:00am as usual. Some of the local folks will probably get there a little before that. We generally take the stand to the far left.
  5. Nick, get some good pics for us man.
  6. It's in the title of the thread. Coupon code is "pmag"
  7. Don't forget to set your DVRs! Hope this season won't disappoint.
  8. Ha! Going to use that as someone's screensaver tomorrow at work.
  9. Lalo replied to big five's topic in AR Discussion
    Alright guys I can't help but think were just pouring salt on an open wound here. Sure he overpaid but what's done is done. Key thing here is that you are happy with the rifle and just go shoot the crap out of it!
  10. So what exactly would hold the baseplate in place, JUST the pins?
  11. +1 Out of spec trigger group or lower. I'm betting on the lower. ETA - Pick up one of these or any other reputable lower and try again. http://palmettostatearmory.com/index.php/psa-blemished-safe-fire-lower.html
  12. Lalo replied to big five's topic in AR Discussion
    Maybe just a little. If you can't undo what you did, don't fret. Just shoot the gun and enjoy it!
  13. Railed gas block (like in my M&P15 ORC) is going to be too big and chunky to fit under a FF rail. You'll have to replace it with a low profile gas block so the FF rail can cover it. One thing you have to consider now is how you're going to replace the gas block if you have a threaded barrel with a pinned/welded brake that will prevent you from sliding it off the barrel? If the barrel you get is not threaded, no problem. If you decide to do it afterwards, get an upper with a standard FSB then just cut it down yourself. http://njgunforums.com/forum/index.php/topic/52111-free-float-rail-suggestions/?hl=%2Bfree+%2Bfloat
  14. So, you're getting ready to shoot. You lock the bolt back, insert a loaded mag, use the bolt catch/BAD lever to send the bolt home and a round is chambered... 1. At this point, are you doing a press check by any chance taking the bolt out of battery? 2. After you drop the bolt, if you hit the forward assist, does the bolt lock in/move forward as if it wasn't fully into battery? After the first round is chambered and you try to pull the trigger, this is when you're feeling the heavier trigger than normal. You squeeze the first round off, the rifle cycles and ejects the spent casing, bolt is pushed back far enough to strip another round from the mag, chambers the second round and this time the trigger is as smoothe as in your video without the upper installed. Is that correct? Can you duplicate the issue any other way than with a live round? How many rounds have you put through the rifle so far? At this point I would take the trigger assembly off and check for burrs or rough edges. Since the parts are new, check the BCG for any abnormal wear marks around the part towards the bottom ramp that cocks the hammer back as it cycles. Where are you located? Maybe someone can meet you and try swapping out components to narrow down the culprit. I'd try your complete upper on someone else's complete lower first.
  15. From what I've experienced in numerous ranges, .22 rifles are welcome, even in "pistol only" ports. I don't think I've been to a range that doesn't allow .223/5.56. The only range that had issues with shotguns was Shore Shot, I believe they said they only allow members to shoot 12g and even then they only allow buck shot. I believe your theory is correct about the collection of spent casings but there could also be other reasons. Some ranges don't allow steel CORE ammo because it damages their backstop. I heard some don't allow steel cased ammo because of the sparks it generates which could cause unburned powder to spark which could cause a fire (I think Bullet Hole said this)
  16. Did the selector test pass with flying colors? What are the specs on the rest of the items? BCG (FA?), lower/upper... Other than an out of spec trigger group or lower, something else has to be binding the trigger on that first pull. You mentioned machine marks, where are you seeing this? Perhaps close up (in focus) pictures of the trigger group will help. Also, if you separate the upper, set it to fire and run through the motions of pulling the trigger (don't let the hammer smack the bolt catch, put your finger in the way), hold the trigger back as you push the hammer back until it engages the disconnector, then release the trigger slightly till it resets then repeat, does that process cause the issue to replicate at all?
  17. I love my Sigs. The only thing I dislike (or really just have to get used to) is resting my thumb on that damn slide catch lever and having it NOT catch the slide on the last round. Again, not the gun's fault at all, It's just me being used to the thumbs forward grip.
  18. That is a very odd problem you are describing. Can you give us some specs on your build? Specifically what LPK, BCG (FA?), lower/upper. Since you built it yourself, let's just check the basics and see if anything is off. Check the disconnector spring for proper orientation, wider part down in the trigger housing. Sometimes that gets mixed up with the bolt release plunger spring. Also check the trigger/hammer spring orientation. Also, this test is pretty good to see if anything funky is going on with your selector: SELECTOR TEST For this test, you will only need the lower receiver group. Prior to performing the test, ensure that all parts and springs are properly installed. 1. De-cock the weapon and place the selector in the FIRE position. 2. Pull the trigger and hold it tightly to the rear until the next two steps are completed. 3. Force the hammer back onto the disconnector. 4. Rotate the selector to the SAFE position. PASS: Hammer resets on the trigger. FAIL: Hammer falls to the fired position. If your weapon fails the selector test, replace the following parts (with known good ones) in order and repeat the test after each part is changed. 1. Disconnector Spring 2. Disconnector 3. Hammer 4. Trigger
  19. I was shooting good old Herters 55gr steel cased 223. Here is a vid I just uploaded of me shooting the same rifle. Not all shots had a fireball, but I guess that kind of inconsistency is to be expected from cheap ammo. Ran through about 250 rounds through two ARs, no malfunctions. ETA - I guess I can't link a video tonight. /ipad
  20. Caught this shot of my buddy shooting my AR with the Troy Medieval brake.
  21. Another awesome time spent shooting with a group of fine people! See you guys next time.
  22. Looks like the rain is going to hold off till tonight. I'll see you guys there.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.