Everything posted by Lalo
-
Build at last!
Nice. Make sure to clean the grease off all the components of the LPK, then lightly lubricate them before you install them. A wipe down with an oil/lube saturated cotton patch would do just fine. Do the same with the lower, except it wont have any grease on it, instead it'll just be really dry. Lower doesn't have to be lubed (of course) but wiping it down with a silicone rag or again, an oil saturated patch, will give it a nice shine. If you've never installed a LPK on a lower, take your time, use lots of masking tape around the bolt catch lever when installing it and be extra careful when installing the pivot pin detent because that will fly away on you. Youtube is your friend.
-
Build at last!
Yes, I stand corrected. Actually, for the past few builds I've done, I've always had the complete upper first and I've neutered that (pin/weld comp and shave the bayo lug) before obtaining a lower. Then when the lower is about to arrive, I bring the upper to someone else's house for just enough time for me to pin the stock. Since you've already ordered the part, I would just take the upper to the gunsmith as soon as you receive it before you even open the box. Also, don't forget magazines. MidWestPX is a great source. Some local shops might also carry NJ legal AR mags.
-
Possibly lost SS card
I believe you have to file a police report if your SS card is lost/stolen. Then just contact your local SS office and request a new one. You'll most likely have to come up with numerous points of ID/legal status and maybe even the police report itself. I did this about 15 years ago so maybe things have changed.
-
Captains Inn in Forked River Denies Veterans Entry
I'm surprised that this has not been brought up to a reputable news station and put on TV.
-
Build at last!
If you're not building your upper from scratch, this is a good deal. Comes with bolt carrier group, charging handle. Stag is not a bad brand at all. http://www.bravocompanyusa.com/AR15-Stag-Arms-6-8SPC-M4-Upper-Receiver-Group-p/stag%20arms%20model%205h.htm BCM also makes excellent AR's. This one is in stock, and gives you the option to add a BCM charging handle (which I recommend, I have on all my ARs) and BCG for $220 more. The CH is about $40 retail so you're paying $180 for a quality BCG which is not bad. There are cheaper ones out there but you cannot go wrong with BCM. Doesn't come with a hand guard so you can pick one you like and install it in two seconds. You'll have to purchase a brake/comp and have a gunsmith pin/weld it. http://www.bravocompanyusa.com/BCM-M4-16-Upper-Receiver-Group-p/bcm-urg-m4-16.htm Remember what people said about having all the PARTS to build an assault weapon. Research "Constructive Intent". This means that you cannot even have the parts to build a complete rifle that does not meet the states legal requirements. Meaning, since you already have a lower and an LPK, you can purchase a buffer tube, buffer, buffer spring and stock and have it shipped to your house and finish building the lower yourself. Even if you have the stock and it's still adjustable, that's ok for now because you dont have the rest of the parts to build a complete rifle. Bring it to a gunsmith to have the stock pinned and you're good to go. If you did not get the stock pinned and had the upper shipped to you, then you will have the parts to build an illegal rifle (stock not pinned + threaded barrel with no comp. If you come across this situation, you could temporarily bring the complete lower with unpinned stock to a family members house while you wait to receive the upper. Once you get it, bring it to a gunsmith to replace the flash hider with a comp and have it pinned/welded. PLEASE NOTE: Most if not all gunsmiths will NOT allow you to bring in a complete illegal rifle in order to have it neutered. I would get the rest of the lower parts first, then deal with legalizing that. Then once your upper is on its way, bring the "legal" lower to your buddy's house while you bring the upper to the gunsmith. People will say you dont have to worry about this because big brother is not watching everyone but hey, if it will put your mind at ease, go for it. If you don't care, go ahead and take the risk.
-
AR schematic and functionality
Watch these two videos.
-
Build at last!
+1 on the Thorntail Adaptive Light Mounts. I was looking for something that would mount the light very close to the barrel/handguard. I have a couple of flashlight mounts for sale that I tried but didn't like because it positioned the flashlight too far away from the barrel/handguard. Vlad turned me onto these and I absolutely love it. It gave me the ability to mount the light close to the barrel and as far forward as possible, next to the gas block. Since I have a carbine length quad rail on my AR, using a conventional mount would eat up enough rail space that it made it uncomfortable for me to hold the rifle up with my support hand.
-
Build at last!
Start with the basics. Accessorize later after you realize what you need or not. For HD, an illumination device is a must. No need for night vision, lasers or any other doohickey. Also, are you building your upper from scratch? While its not difficult as long as you have the proper tools, I would consider purchasing a complete upper especially if this is your first AR. Dealing with gas issues from a bad gas block install and dealing with head space issues suck.
-
Build at last!
- Build at last!
Typically you have the lower shipped directly to the FFL so you would put that in the ship to section. I would try to give the vendor a call or send them an email and ask what to do next. You might have to change the ship to address to the FFL and then just have them fax their cert to the vendor.- Build at last!
Use True Value Hardware in Lincoln Park. 206 main St. 973-694-1150. I think last time they charged $40 for the transfer. I've done 4 with them so far. Either call them and they'll fax their FFL to the vendor's fax or sometimes after the order you have to call the FFL and give them your order number. Is this the first item you're getting or do you have other parts already?- Build at last!
BCG BCM - http://www.rainierarms.com/?page=shop/detail&product_id=3653 PSA - http://agsarmament.com/palmetto-state-armory-ar-m4-bolt-carrier-group-full-auto- Build at last!
Lowers Mega - https://www.primaryarms.com/MEGA-Forged-Lower-p/mo200.htm Spikes - http://www.shop.doasales.net/Spikes-Tactical-Spider-Spikes-Tactical-Spider.htm- Build at last!
Buy this LPK now while its still in stock. Spikes - http://www.aimsurplus.com/product.aspx?item=XSTLPK101&name=Spike- RTSP "first time" shooter question
1st time VISITORS need to sign all their paperwork and also watch the video. Once you go through all that the first time you shoot there, you don't have to go through it again.- Good Reason to Invest in Reinforced Doors
Dammit, can't hear the video at the moment. What's the backstory?- Gun Leather Belt
I use a rigger's belt similar to this.- installing longer handguard
The Diamondhead install looks very straight froward. As far as their proprietary barrel nut, yes, the gas tube will actually sit on top of the nut. You still want to make sure to apply whatever torque spec they recommend so that things don't loosen up on you. I assume you would still apply molly grease to the threads before sliding it through. Sliding the gas tube back in shouldn't be a problem as long the new nut ends up with one of the flat sides at the 12 o clock position. Removing the FSB should also be pretty straight forward. The pins are tapered and only come out one direction, I believe left to right. Look at each side of the pins and hit the side with the smaller of the two. I believe Smith & Wesson are the only ones that do it the opposite way. When you hammer them through, use a larger punch than the diameter of the pin to start them off, then switch to the size that will allow you to push them through. When you go smack it, make sure you are laying the FSB in a nice sturdy concrete floor or the like. If you try hammering the pins through while laying the FSB on top of a rug or padded surface, that surface will absorb most of the impact and will make it more difficult for you. In case you have problems removing the existing barrel nut and have to use a breaker bar, make sure you secure the upper in a proper vice block otherwise the excessive torque you're applying could throw other areas out of alignment. Some people use a clamshell type block, some use a pin type block. if I were doing it myself, I would use something that would grab onto the barrel itself rather than the upper. You can also use something like this: http://www.brownells.com/gunsmith-tools-supplies/rifle-tools/barrel-tools/ar-15-m16-308-ar-barrel-extension-torque-tools-prod27452.aspx. Worse case scenario you can apply heat to it or maybe throw it in the freezer overnight. I see your other post asking for help with this. I'd be happy to help but I don't have an upper vice or barrel nut wrench. If you can get them, feel free to come up north and I'll give you a hand.- Easton Game & Fish (EFGA) This Sunday
This is true. I'm out for this weekend. I might pass by the Fairfield Trap range one of these days to at least bust some clays unless its raining.- Anyone else afraid to buy/own ammo?
Definitely not afraid of stockpiling ammo, especially when you find it at a good price. I remember seeing a thread a while ago (maybe not on this site) where people showed off their ammo stockpile. I tell you, it definitely made my "couple thousand rounds or various rounds" feel like it was nothing. Most people are worried about where to store all their ammo. Hey, if you run out of space in your safe/locker, there is always the pantry...- Easton Game & Fish (EFGA) This Sunday
I was thinking of passing by this weekend as well. Not sure if I'll be there Saturday or Sunday early in the morning. If you see a burgundy Jeep Wrangler, give me a shout. I'm usually wearing a black UnderArmour baseball cap.- Sad day, I lost my dad today...
My condolences. Really sorry to hear about our loss.- 10 gauge muzzleloader for clays
Might want to go improved cylinder or even a modified choke but honestly, I have no experience with 10 gauge shotguns or muzzle loaders. I use a modified choke on my Mossy500 field and use no choke on my HD Mossy500 to bust clays. BTW, where are you going to shoot clays this weekend? I might pass by the Clay Target Club Thursday after work for a few rounds.- installing longer handguard
Patience. Wait for the right tools, do it yourself, learn about your weapon, enjoy the gratifying results. Since you have to replace the factory barrel nut, be careful when reinstalling the new one. Read up on the type of grease to use and the proper torque technique and the min-max torque. After you're done, when you go shoot it for the first time, use factory brass ammo, not cheap steel and make sure the chamber and everything else is clean. That way if you have gas issues, the ammo and dirt is not to blame.- How often do you shoot your rifle? How's the heat treating you?
Being up in north Jersey, I don't shoot a lot in the middle of the summer because I cant stand how hot the indoor ranges get. Woodland Park is the best with the AC so far but still, I prefer to shoot outdoors. When I do shoot outdoors (EFGA), it's off a bench, standing up, or on a knee, cant run and gun or move much which sucks. I mainly shoot standing up or on a knee and alternate positions as I shoot. I setup targets at 25, 50 and 100 and I load 5 rounds on about 4 or 5 mags. I might do some standard high drills on the 25yd target then go down on a knee and hit the 50yd target in the eye box. Sometimes I might go prone for the 100yd target but it depends if the place is empty and I can move some of the benches over to give me some space. I make sure to do mag changes at each position. Sometimes I throw a spent case or a snap cap somewhere in the mags to simulate a malfunction. - Build at last!