Vini

I wouldn't worry about hard steel of the rod for original barrel, but could be a good point for domestic barrels. Length of the rod is sufficient once you attach brush, patch tool or other attachment from cleaning kit.

Finding any AK magazine right now is a challenge, finding 15 round AK magazine might be next to impossible. Your best bet is mtnarmory or use Tapco 10 rounders.

1. They are not divorced yet and alimony/support will be calculated from current earnings based on current situation. 2. I don't know exactly what happens to payments if guy is in joint, but he can't be prosecuted for not paying alimony while not earning money behind bars. 3. Judge can demand whatever he wants. If person has no income - wouldn't get them far and will be overruled at appeal.

Later we will see what is true and what is not in this story. So far we base our opinions only on mix of facts/fantasy/BS reported by yellow-ish nypost.com Problem is there is no choice. PA has monopoly on entrance to Manhattan from NJ and you can't do nothing about that. You can actually choose to do or not to do business with Cabela's or McDonalds. If you have to travel, you can't choose not to use bridge or tunnel. In 2000 toll was $3.00, as of 2012 toll is $13.00 - over 300% increase without a good reason. Just because they can. Basically making travel to Manhattan a luxury. NYC is happy to support toll increase - they tried few times to impose "Manhattan business hours fee" but were turned down by Albany. I understand Manhattan people - they want less traffic and cleaner air. Nothing works better than hit in the wallet. I don't really like to pay $13 - it sucks. But I also hate to stand 2 hours in traffic jam with people who don't have to drive to this small island with very limited space. After tolls became $12 I've seen less traffic jams. Do people have reason to dislike PA? Absolutely! Is a cop's salary relevant here? Nope, come on. There are about 300 000 vehicles crossing GWB per day, even some of them are trucks paying $13/axle, lets count them as personal cars $13/vehicle. It's close to $4 million in tolls per day from GWB only. This cop's $500 per day (including overtime, benefits and everything else) doesn't even come to the picture. Another thing. I do have a lot respect to LE in this country (I'm an immigrant and have seen some things you wouldn't believe) with a little exception of PA cops. I'm driving a lot, so I do come face to face with cops in different jurisdictions. The only a-holes cops I have encountered were from PAPD.

This ↑ Wait till she realizes that "suspended without pay" and possibility of long imprisonment = to her having to feed herself. There is always a possibility that she actually needed the restraining order, but in my life experience it's a common blackmail tool, especially against someone who owns firearms or uses firearms at work. On the side note, if the guy who is obligated to know the law, finds himself in divorce situation, has a hostile wife and owns illegal items (keeps them at home!) - makes him a moron, regardless of his job.

Bullet Hole is a great place. Reasonable prices. No extra charge for second shooter. ROs are friendly and reasonable. No problems with my 74 and 5.45x39 surplus ammo.

" We got suspect under arrest for domestic violence related incident. While he was being processed, he got into a violent confrontation with the officers. He obtained firearm. He fired and struck 3 of the officers. "

You might want to contact a lawyer who actually KNOWS gun laws and knows how those laws work practically. I guess there very few of them in NJ. Or at least get that advise in writing. [ Don't ask me how I've learned not to deal with lawyers who do everything and take any cases coming their way ]

This is your answer to mag limitations: www.youtube.com/watch?v=CAFxgQmxbGI

It's a good idea. But I will spend $10-$12 next time I'm buying something I need and get extra cleaning rod to keep at home for cleaning. One on the rifle will stay there for looks and just in case - it's still possible to get it out, just takes some effort.

"The only people who need these assault weapons are drug dealers, mass murderers and cop killers," "I have no problem with people who want to have a gun to hunt..." - how someone like that becomes State Sen.? He didn't go to school? He didn't study history? 2nd A. is in force to protect The People from overregulating power grabbing politicians like Richard Codey (D-Essex). So USA doesn't become USSR or PRC with tens of millions murdered by government.

Better for what? To join? To get training useful in civilian future? To get training to become a warrior? To get shot? To get money for college? To be most useful while serving your country? To get through service without risk?

Wow, there are sane journalists out there... Obviously AWB is against 2A.

I don't know. On one hand there could be consequences, because if people who don't need/know guns start buying them - sooner or later there will be a problem. On another hand in NJ it takes on average 2-3 months to get FID, so our panic buyers just getting their fingerprints done... If someone in NJ have had FID before the panic - chances are he/she knows his/her way around weapons and if he/she bought an extra rifle/handgun/shotgun/ammo - most likely it wouldn't be a problem. However, on the national level, we might see some consequences in weeks/years to come.

Wow, looks like the closest Cabela's is in Hamburg, PA. About 2 hours drive from me.

Because it doesn't feet liberal agenda. Nick Meli will not get any media coverage because his is a good guy, while agenda needs only bad guys with guns. Not to mention he is the reason why they didn't get another "sensation".

Well, it is a possibility, but halt on import can come and go. Don't know about 7.62x39 but it's still possible to stock on 5.45x39 surplus in "forever" cans at about $0.13-$0.14/round. (pre-order) Also there are plenty of mini-thirty's around + 7.62x39 uppers + AKM types. I think quite few domestic manufacturers currently produce 7.62x39. From another place:

There is Yugo Zastava M70 PAP Gen 2 with regular magazines and regular stock. But from all I know there is nothing available as of today. It will pass, maybe even prices come down after 'storm'.

What about $2400 for a WASR http://www.gunbroker...?Item=322417677 While k-var still has SGL21 for $940

I wouldn't worry about milled vs. stamped receiver. Practically there is no real difference besides extra weight. Milled receivers more expensive, obviously. As far as I know all military rifles made in last 50 years have stamped receivers. I believe milled receivers were used only in original AK-47 starting in 1947 to be replaced by AKM with stamped receivers in 1959.

As far as I know there is general opinion to keep away from Century items - have some bad reputation. If you want 5.45x39 - the best IMO available choice Waffen Werks AK-74. Saiga or Wepr are good too, if you can find one. Rumor has it, there gonna be SGL-31 (best choice IMO) back on market in Jan. For 7.62x39 SGL-21 believed to be best available on the market and k-var has few in stock. Also Zastava M70 PAP has good reputation. Saiga or Wepr are good too, if you can find one. For 5.56x45 only Beryl (great rifle IMO) currently available, I believe Royal Tiger Imports has best deal right now. Saiga or Wepr are good too, if you can find one. Right now not that many options out there - AKs getting off the shelfs like there is no tomorrow.

Yes they do, just like that: But you will have hard time removing the rod with welded MB. I recommend getting another one to use for cleaning. BTW, I'm interested in AK-74 cleaning rod and cleaning kit.

All of us will have to study Chinese or Arabic real soon after complete ban. Or, maybe, Russian.

I've heard about cutting Tapco 30 round mags to make them 15 rounders - easy task but must be done outside of NJ. I'm surprised local dealers don't sell them in this absolutely permanent condition. Have you tried 10 to 15 rounds conversion? Eventually one will have to cut about 3/4. Don't know if .05 will be enough for extra 4.5 rounds. In normal factory condition you have 2 inches for 10.5 rounds. Just tried to squeeze the spring and got 5/8 available spase, so cutting 3/8 should be safe, probably will add 2-3 rounds. I don't see any danger here, not sure if having spring 100% squeezed is a good idea, guess leaving 1/4 would make sense. Any thoughts?

It's funny to quote myself I've got it! Picked up last night. Total was 3 months, not that bad.