Everything posted by bhunted
-
Internet Explorer 11
OK, so far, I've found that there are problems with certain forum software. This forum software and vBulletin are 2 culprits. phpBB is fine, etc... So who will fix it? The forum developers and/or MS or both? I'm trying to find a temp work around because I really like IE11 and I haven't said that about IE in a long time.
-
Internet Explorer 11
Crap, same with that CnP! Dagnabit! And it's working great too compared to 10 which was a slow POS...
-
Sling shots illegal - unless you are Harbor Freight
OMG! That dude must be hurting. Think she'd pull the ball out and put pressure on it right away.. lmao!
-
Internet Explorer 11
Hey gang... Any of you start using IE 11? I got tired of FF locking up with flash and stuff. Upgraded to IE11 and it is great! Except one problem.. When trying to quote a message here using the quote button, it does not carry the quote into the edit box. Anyone else have this issue?
-
Drilling a Brake
Especially Playboy and Penthouse and a few others... (Just kidding)... Don't get me started on Mags... That's a whole other argument.
-
Drilling a Brake
I'm not trying to prove anything. I already admitted to being corrected and wrong. (See post #25 in this thread), That letter was not to prove JB Weld use at all. No where did it mention it. That was a letter from the ATF to an FFL holder which somewhat sunstantiates the partial ruling. I had problems finding ATF info... (Thanks alowerlevel)... Now that I have all the data I need, I will go out and correct the offenders in the field... Okedokee? Thanks for everyone's input...
-
Drilling a Brake
Thanks... I just spent 30 mins searching the atf site for that damn manual...
-
Drilling a Brake
OK, with that being said.... I have 3 observations to speak of... 1) 1100 degrees can be accomplished with silver solder paste with flux and nothing less that a torch using nothing less than MAPP Gas... (holding torch on barrel too long will ruin it) 2) Welding at least 1/2 half is simply a shody way and fine if you do not care about aestetics. (this can be circumvented just as easy by grinding away the weld with a cutting wheel such as a dremel) 3) No where does it say -pinning- and -welding- in the manner most common around here to be legal or acceptable. (???) I see only 2 methods acceptable. Unless there are definitive laws depicted in the ATF rulings, I see no reason for pinning to be legal either. Please elaborate. I'm interested and curious as well. 'What Say You'...?
-
Drilling a Brake
OK, I found a copy of the ATF letter from 1998 that describes the method, etc... This refers to your letter of March 31, 1998, in which you ask about permanently attaching a muzzle device to various firearms. A muzzle device, such as a muzzle brake or barrel extension, which is attached to a barrel by means of welding or high temperature silver solder having a melting point of at least 1,100 degrees Fahrenheit, is considered to be part of the barrel for purposes of measurement. A seam weld extending at least one-half the circumference of the barrel or four equidistant tack welds around the circumference of the barrel are adequate for this purpose. A firearm having a muzzle brake, cap, or barrel extension permanently attached by those same methods to cover the threads on a barrel, would not be considered to have a threaded muzzle. Please note, however, that any muzzle device or barrel extension which functions as a flash suppressor or grenade launcher would still constitute one of the qualifying features of a semiautomatic assault weapon as that term is defined in 18 U.S.C. section 921(a)(30(B). Industrial adhesive products are not an acceptable method for permanently attaching a muzzle device.
-
Drilling a Brake
Nor have brains. You can destroy the threads, yadda yadda... But cut it clean and rethread and you got a fresh barrel minus an inch or two... Anyone have a link handy to the atf ruling regarding not using jb weld... Be much appreciated. Sent from my iPad 2 using Tapatalk 2 Pro
-
Drilling a Brake
I was being facetious... Sent from my iPad 2 using Tapatalk 2 Pro
-
What are the best gun Apps available?
iSnipe Sent from my iPad 2 using Tapatalk 2 Pro
-
Drilling a Brake
I don't doubt it. Clarify though... Isn't the whole point is not to be able to unscrew it on the fly and add a suppressor? If the thought is that weld/pin means the barrel will be destroyed, then yes. If it means someone will pin it to stop the owner from removing it and adding something illegal themselves, thats a bad excuse. May not be as easy as cutting down a shotgun barrel, but cutting an AR barrel off, recrown, rethreaded and made suppressor friendly. All this does is protect the ffl and put the weight on the owner. My opinion, it should be good enough as long as it cannot be changed -easily-..... But that's just me.. Sent from my iPhone using Tapatalk 2
-
Drilling a Brake
- Drilling a Brake
OK, I stand corrected. Then someone else is misinformed and that I will get corrected quick-fast-not-slow and get back to yaz. Becayse this whole thing is BS... Who gives a crap how it's held on as long as it cannot be removed with tools. I'm going to really dig into this deeper...- Drilling a Brake
Maybe you ought to chat with some dealers and distributors. JB Weld requires over 1250 degrees to be removed which most likely will destroy the barrel by warping or ruin the threads... Or both. It's what's being done outside of using silver solder. I've been seeing compliant guns come in direct from factory with no pins or exterior welds. I know this is an old argument but tell me why it wouldn't be? We even tried removing a brake with jb and almost broke the dang gun. Isn't this the basis of what needs to be accomplished? Sent from my iPhone using Tapatalk 2- Drilling a Brake
JB Weld... No drilling necessary.... (OK, start the slaughter)....- against the law for an adult to shoot a youth model?
Joe, wanna pop on over there so we can drive them nuts? Lmao... Sent from my iPhone using Tapatalk 2- Snow Blower question
The POR15 seems like good stuff, but it's a preventative that can be directly applied to rust. Not sure if I understand this does the same thing I mentioned. The stuff I posted actually changes it from rust to almost a black metal. Maybe the POR15 would be good to use with it? Sent from my iPad 2 using Tapatalk 2 Pro- Snow Blower question
It was there because I saw it. I was even going to edit it and add the brand name. But whatever. I'm over it. What is POR15? Sent from my iPad 2 using Tapatalk 2 Pro- Snow Blower question
I know! Neat ain't it? Not sure if I had that brand or another but you can watch it convert the rust and solidify it almost immediately. Kewl stuff. Sent from my iPhone using Tapatalk 2- Snow Blower question
You should be able to use that stuff I mentioned. It will stop the rust and solidify it. Then prime both sides and either use some screen and bondo or slap a few pieces of sheet metal over the holes at least a couple inches larger than the hole. Smaller holes are easier. Sent from my iPhone using Tapatalk 2- Snow Blower question
Just to prove it, it's called Eastwood Rust Converter... Look it up. In the mean time, I want an apology.... Sent from my iPhone using Tapatalk 2- Snow Blower question
Who is the meathead that deleted my reply here about the special paint I mentioned that stops rust by turning rust back to a substance similar to metal??? I was serious! This kinda of deleting crap pisses me off! Sent from my iPhone using Tapatalk 2- Another 3D gun. A Steel 1911
Haven't seen this posted yet... A company came out with another 3D gun, but in steel. A 1911 to boot! http://www.foxnews.com/tech/2013/11/08/texas-firm-makes-worlds-first-3d-printed-metal-gun/?intcmp=features - Drilling a Brake