Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

twong11219

Members
  • Joined

  • Last visited

Everything posted by twong11219

  1. Sounds more like your target stand surrendered. Did a white flag come up?
  2. That's the guy. He was staring at me and my friend numerous times like we don't belong here. Always makes us feel like we're doing something wrong. I clipped my badge where it wasn't easily visible one time and he was telling me to wear my badge visibly. After my encounter with him, I make sure I follow every rule there, but he always looks for something to gripe about. Nice that I'm not the only person there that feels harassed by this guy. There was one time we were at the rifle range and he was using the leaf blower around us. I'm trying to pop a few more at the 100yd before dusk, and he was kicking dust around me. After the delay from him, he told us we better pack it up for the day. Just wanted to empty out my mag on some fresh targets I put up. Maybe he is one of the maintenance guys. Don't know, but he acts like a RO telling everyone to read the rules.
  3. Hey Dino. Bringing any new toy with you this time?
  4. Not to jack this post but may be relevant to the OP. Most ROs there are really friendly, but there's this one that just seems to wake up on the wrong side of the bed everyday. I know they volunteer their time, but this guy just seems annoyed all the time. He always looks at everyone like they did something wrong. I usually go Sundays and bump into him on those days. Just curious if others have had the same encounter.
  5. You can always go with someone that has a membership and a guest pass to give it a try. I usually go on the weekend. I don't know when I'll be going the next time, but post something up and coordinate with someone. If there's something in line with my schedule, you can tag along. Also, first yr members is not that expensive and renewals are even cheaper. My first trip pretty much paid for itself compared to going to a range that charges by the hour. The time to drive there is my biggest gripe so I usually plan to stay for a while when I go.
  6. Not sure if you plan to use the shotgun range too, but if you do, bring some 2x4s just in case. The ones there have been shot to bits so you can't even mount any cardboard or targets up. Happened to me twice already. My last trip, I found a branch long enough to mount the cardboard and targets to. Next time, I'll remember to bring some with me and leave them on the side if someone did come by to fix them. Follow the rules for a cold range. When someone calls for one, mag out, empty chamber and bolt open or empty shell sticking out of the port. Don't step past the red line on the floor till the range is hot again. Sign the log in book for all ranges you attend. I have a tendency to forget while setting up and have been called out by the RO a few times. Be courteous to fellow members and follow the 1hr rule if it's busy and all the benches are full. I've never had that issue ever as there was always a bench free for someone, but it is in the rules. It's a very social environment with very cool members with cool toys and runs based on the cooperation and safety awareness by all members. Don't want to taint the place with a bad safety record. Always aim down range. I don't feel comfortable when someone next to me sweeps me with the muzzle, empty or not. I always try to be aware of where my muzzle's at for the safety of my fellow colleagues. Aim up or down if your pulling your gear out of port to put away. Just simple logical stuff. If you see something not kosher, say something. If an RO is not present, pretty much everyone plays the role. I reasonably won't be offended if the member next to me was pointing out something that can possibly become a bad situation. Have a ball. It's a great place. Far from me, but always enjoyable every time I go.
  7. Check this out. http://njgunforums.com/forum/index.php?/topic/46005-lowers-after-an-awb/
  8. Honestly, I don't see PRNJ that bad compared to the other members. As I was originally from NYC, NJ is worlds apart. Yes, NJ has some limitations of evil features and mag restrictions, but being able to even own one is awesome in my book. Lately I've been feeling the clinch of NJ when I see what's available in PA. I purchased mine during the election period and thought it was ridiculous at that time. I wanted a specific make and model and passed on a whole bunch of in stock ARs to finally get exactly what I wanted. Waited a month and a half to get it in my hands too. Today, I can't even find parts to build my second one. Everyone is hopeful nothing will pass, yet everyone is also hoarding and stock piling for the worst. So if nothing is going to change, why buy everything off the shelves if it should be there tomorrow. The problem is, no one knows what's going to happen tomorrow which leads you to your dilemma. Buy now or wait. My answer to you is this. Hope for the best, but plan for the worst. Buy it, build it, do whatever your budget can afford to get it. Don't worry about the evil feature restrictions. If you eventually move somewhere else with less restrictions, change up the parts to get it back to its original non-neutered glory. Your decision should not be based on a monetary investment but rather an investment to your lifestyle. Have I just corrupted your mind?
  9. I placed an order with Stag on Saturday. Still waiting for them to process it.
  10. Worst case scenario, you can always replace it. New tube and stock. To add, just google'd and saw another guy asking the same thing. The current tube might be proprietary and may not be capable of adjusting even if there was a pin to remove. Most recommend replacing it.
  11. Palmetto State's got them in stock right now. Read mixed opinions about some brands being inferior to others and some without any complaints whatsoever, so I assume there are differences in mfg quality between brands. In the current state of the market, the best LPK is the one that's in stock.
  12. Not sure how they pin it, but check out Mastodon. They should be able to help you out.
  13. I run a Burris FastFire II on my 20" 590A1. I use it because it came in a combo pkg when I bought my 3G scope. Was intended for my 22/45 but didn't like it at all so it sits on my lead dispenser now. It's got its pluses and minuses from my experience so far. Let's start off with the minuses. 1) Since I feel this RDS is kinda small, if I don't shoulder correctly, I loose the dot and then need to reposition my head to find it. So consistent cheek weld is necessary. 2) The rim around the lense blocks your view when leading on a clay pigeon. 3) The RDS blocks my bead which renders it useless. If you have a ghost ring or rifle sights, you can co-witness which won't be an issue in that case. 4) My Burris is not like some other brands where you can just leave it on for years, but batteries are batteries. Eventually they will die. Now the pluses. 1) In low light, the dot shows up nicely. My FastFire has a light sensor that dims based on ambient lighting. So if you can't see your bead or front sight, you'll only be running instinctively for aiming. 2) It's very simple to use. Place dot on what you intend to destroy, and let'r rip. 3) As Ray can be my witness, the RDS can be used as a back-up when your tritium front sight falls off. In conclusion, do I need it for HD? No. Why do I keep it on? My intent is more for 3G use with slugs. I leave it on just to keep it zero'ed. If my focus was on a dedicated HD setup, the RDS would be out. I've shot clay with beads just as consistent if not more than my RDS. I prefer an unobstructed view more than a dot for low light home use. If ever there was a SHTF situation, my furthest engagement distance will be 30' wall to wall. I don't need an RDS for that. ...but to each their own. Just my 2 cents.
  14. Placed an order on Saturday. No email conf. Web says order pending. The wait continues.
  15. Not to say I'm capable at that distance, but really? I remember reading something on why the PSG1 was never adopted by mil, other than the insane sticker price, because max range of the permanently mounted scope was at the beginning engagement distance for mil. It was fine for LEO as their distance is much shorter thus have been adopted by LEO if they can afford to.
  16. That may and will likely be the case. Not to say whatever you bolt that thing on to will be cheap either. You can always say it's an investment like a Prius or a reloading press. Saves money by sending less lead down range and eco-friendly with less pollutants sent into the air. Hey, I'm trying to save the Ozone. All in all, that does sound cool. I wonder if the wind is constantly varying, it'll affect the compensation in real time. Even though it's capable of auto-calculating mile shots, it probably won't be used at that range all the time. What's the min engagement distance for mil snipers? 600+?
  17. I'm in the same boat as you. Got a fixed front sight on my 92FS and can't do anything with it. I researched Trij's in the past. You have to mail in the slide for them to install it. Best have the mfg do it for you. I don't think it was that expensive either, but you'll need to call then to double check. I'm not sure if that still do that service anymore. Now for the DIY in you, you can probably do it yourself if you're careful. I wouldn't risk it. Could be a few dollars saved or couple hundred dollars of nightmare.
  18. Anyone ever used Lucas white lithium grease before?
  19. From the looks of the picture, it looks like they punched a tab in the front of the body, and I assume back as well, to limit the follower from going beyond 10rd. Not sure if the lower plate can be removed as it looks spot welded.
  20. I stand corrected. Time to go shopping for a semi now. LOL!
  21. 6? To clarify, that mean 5 in the tube and 1 in the chamber? Right? I don't remember being able to stuff 6 in the tube. We're not including any ghost loading if you really want to count it.
  22. Ok, one more to contribute. This is my single-stack USPSA beater. Started off as a Colt MkIV. Did my own 30lpi hand checkering to the front strap. Blended and checkered mainspring housing. Was originally a 20lpi arched S&A housing. Thinned and reprofiled the S&A ambi-target safety. Slightly wider than a tac safety but not the paddles like the original profile. Fitted over-sized Clark bushing. Blended beavertail. Peened rails and lapped to a Caspian barstock slide. Flattened and 40lpi serrated rear of slide. Heinie target sights on the top. Throat, polish and mild bevel carry. Finished off with media blasting the stainless and aluminum. Parked and Cerakoted the slide and frame.
  23. That's one clean looking GI you got there. Teas'in me with them roll marks again. That's original park finish right? Can't tell if it's the lighting or my monitor.
  24. And 5rd limit in the tube.
  25. Nice Colt you got there Bob. I love those roll marks. My Colt had them once. Don't ask.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.