Everything posted by WVisHome
-
Science quiz! See how you stack up.
13/13 as well. I am a mechanical engineer though.
-
scope advise for Marlin 336 30-30
The XCR I bought last year was a 2007 model....they did mention it to me when I first called, but I sent them the receipt and told them it was NIB and they didn't give me any guff over it. They replaced a 2007 gun under warranty with a 2012 model.
-
scope advise for Marlin 336 30-30
If it's a new gun within 2 years, it should be free.
-
scope advise for Marlin 336 30-30
Precisely...but I'm not sure how they'd handle the front sight mod.....although, it's the barrel, not the sight, and it's causing him headache with an aftermarket sight...so they might. Just give them a call and explain the situation. They'll let you know. Yea, my XCR had some pretty nasty pitting in the barrel....they tried to lap it out, but the pits were way too deep. When I got it back and the pits were still there...so I called and talked to one of the CSR's. She agreed that it was unacceptable and sent me another shipping label. I specified that I wanted a rebarrel or a replacement (knowing full well they didn't have parts for the XCR line anymore). They agreed to replace it and even let me pick which replacement I wanted. So....they made it right by me.
-
scope advise for Marlin 336 30-30
Why don't you want to send it back to Remington? They're pretty reasonable to deal with. I sent a 700 XCR back twice, and ended up with a brand new 700 Mountain SS in its place. Regarding a scope....a fixed scope between 2.5 and 4x or a 3x9 variable will suit your needs, although 4x will be tough to get on target (other than paper) at 25 yards. http://www.opticspla...ifle-scope.html
-
NJ Nics now going on 11 - 12 days
Question....what should my friend do? He's been waiting since 4/5 20 days seems way beyond what most of you are experiencing. It's hard to believe how impatient I was when I had to wait 2 days because of a pending status.
-
NJ Nics now going on 11 - 12 days
My buddy is on day 20.
-
Cost to reload 5.56
In today's climate, it's not necessarily cost effective to reload right now. Availability and customization are my reason.
-
Pressure Cookers Being Pulled
Y'all crack me up...keep 'em coming.
-
NICS checks
My buddy submitted his on 4/5....still nothing. 19 days and counting.
-
Garden Tools Demo Gets Teacher suspended on Weapons Charge
This country is going to hell in a handbasket. The pussification of today's youth spells the end of America as we know it.
-
Bloomberg: After Boston bombing, we need to rethink our Constitution
Wow...yet people think we're paranoid.
-
Whose ready for the NFL draft?
WVU will likely have 2 first rounders this year, and one maybe top 5, with another projected late 2nd, early 3rd....can't wait!
-
Gunbroker.com vs local dealer
I have no shame in going on Gunbroker. I got a NIB Remington 700 XCR (~$1000 MRSP) for $675 shipped + FFL fee. (It was a 2007 model, and the guy said he had about 8 of them still on his shelf that he was trying to get rid of.) Funny part was, I called the shop to make sure it was NIB, and he assured me it was....and told me that he'd waive the 3% CC fee if I just called in and sidestepped Gunbroker. Worked out great as there were defects in the bore, and after sending it back to Remington twice, I ended up with a brand new 2012 700 Mountain SS (~$1100 MSRP).
-
Barrel Cut and Recrown
I always click quote instead of edit.
-
Barrel Cut and Recrown
Also, the Heritage Guild in Rahway does it. I never went to them, but I did call for a quote before my Remmy 700 XCR was replaced. IIRC, the guy said it would be $75-80. That was just for a cut and recrown though....not sure about the sight.
-
Pulled over in Delaware while carrying
Since I'm new here....the "where" would be greatly appreciated, lol. I live right off 13.
-
Rifle suggestion, anyone?
Yep....although I'll always throw in the obligatory plug for the 7mm-08, a 308 case necked down to 7mm (284).
-
Time and cost of reloading
It's all worth the satisfaction of creating your own loads... I concur.....the Rock Chucker kit is great....although I don't really care for the 505 scale. I'm quickly realizing I'm going to have to invest in a digital scale (or at least an RCBS 1010 scale)....and a powder trickler, at least if your working up loads. Using a dipper kinda blows.
-
Rem 700 replacement stock question
Basically, you'd put thin washers (copper I think) between the aluminum block and the receiver, and fill the small gap with epoxy. It's likely not needed....only if there's a significant high spot binding somewhere. You'd be able to see it after shooting for a while. There'd be one or two very shiny places, and the rest mostly dull on the aluminum block indicating high stress contact. Plus, at that point you're starting to split hairs regarding effect on accuracy. EDIT: Here's the kit from Ernie's and they explain it pretty well. http://erniethegunsmith.com/catalog/i186.html
-
Rem 700 replacement stock question
My 700 Mountain SS came with a B&C Medalist stock (not the M40 version though)....has the integral aluminum bedding block. Seems like a quality, lightweight stock. I ended up swapping mine out for a Boyd's FT Thumbhole though, because I prefer the thumbhole stocks. Yes...those tupperware stocks do suck. Don't need to do anything....just torque and go. You *can* skim bed the aluminum block if you'd like though, although mine showed a pretty uniform pressure on the block as is.
-
Revolver Roll Call
I'm surprised at the lack of custom wood grips in here...
-
Looking for a .223 range rifle...Should I even bother?
I think I'm going to have to look at a .17 for my next purchase. I really wanted a 22 Mag....but that's impossible to find too from what I hear.
-
Rifle suggestion, anyone?
I'll throw in a vote for a .243 Winchester....you could probably pick up a 700 SPS fairly cheap. Low recoil, so you can shoot all day. .243 is about the only ammo I've consistently seen on the shelf recently, besides 270. EDIT: Oh, budget ISN'T an issue.... Then yea....go for the 700 AAC-SD in 308. Heard nothing but outstanding things about them.
-
Why do you have firearms?
Many reasons. #1. As many have already stated....because I can, and I also feel partially that it is my duty under the 2nd amendment. #2. I'm a hunter #3. Growing up in WV, guns were a way of life and part of my heritage. #4. It's an investment. Many guns my dad purchased years ago will go today for double the price or more than what he paid for them. #5. It's a hobby....a great way to keep yourself occupied, especially if you're into reloading. #6. It's fun making things go boom. #7. It's a great stress reliever. There's nothing like spending a day at the range solely focused on a single task, forgetting all your worries....very therapeutic. #8. It's a challenge... it's kind of like golf in respect to the idea that, at the end of the day, you're trying to improve every time out.