Everything posted by WVisHome
-
Gunfire and explosions at MIT
I may be wrong, but I don't think it's about converting non-muslims...it's about those who persecute muslims. If the shoe were on the other foot and an Afghani drone strike killed my innocent son/brother/father....I'd probably be inclined to seek revenge as well.
-
Wet tumblers....
For one, it saves the step on cleaning the primer pockets, which is a huge PITA IMO. Secondly, it's not that much more work....the only additional step is rinsing/drying really. Plus, you have the added benefit of not having to pick the dry media out of the flash holes. So... + drying -primer pocket - flash hole = less work to me. (I suppose it does add the extra step of decapping first, but I'd do that either way, wet or dry because I'd rather run clean brass through my neck sizer) And to dry, all I did was roll them around on a towel to dry the outside of the cases....then load them onto my loading block and put them in the oven that I turned on for about a minute just to raise the temp slightly. They were bone dry this morning.....looking brand new. Also, the media doesn't wear out like dry media does.
-
Gunfire and explosions at MIT
Supposedly that was after the photos were released....and I thought it was after they shot the first cop. Either way, I'm sure they were at the point where they had nothing left to lose. EDIT: The suspects apparently surfaced just hours after the FBI released their imaged late Thursday afternoon, shooting the police officer, robbing a convenience store, carjacking a man who later escaped and engaging in a wild shootout with Boston police, in which they hurled explosives from their stolen car. Read more: http://www.foxnews.com/us/2013/04/19/gunshots-reported-on-mit-campus/#ixzz2QvBSXQ53 Yep...once their faces were released to the public, I'm sure it was all over for them. I'm actually surprised they let the driver of the car they hijacked go alive.
-
Wet tumblers....
I just bought this setup and tried it out last night. Worked pretty well for the price ($40). Not sure how long it will hold up, but for another $10 I got the 2 year protection plan...the guy said they'll replace it at any time for any reason, no questions asked. I was able to do 40 rounds of 7mm-08 in a batch. I'm a recreational reloader at this point, so it's perfect for my needs. I started out using about 2/3 of the 2 lb media pack at first, but ended up adding the rest after the first hour. The brass itself was pretty clean after 1.5 hours, but I let it run for 3 hours or so it would get the primer pockets good. I didn't use the white vinegar...just Dawn and a sprinkle of Lemi-shine.....came out looking better than new brass. Funny part is, I ordered the tumbler online with the 20% off code, so I got it for $32....but I ordered it last Saturday and the tracking # says I'm not getting it until NEXT Thursday! I didn't realize there was a HF near me, but it turns out there is.....so I went and bought it in the store yesterday, and plan to 'return' the one I ordered online when it comes, lol. I must admit.....that lid makes me nervous. No real retention, it's basically just a rubber stopper in a rubber can. Didn't leak a drop though. Topher, How much Dawn/Lemishine/water/media do you use? How full do you fill the drum with brass? (40 rounds of 08 came a little over halfway, maybe 2/3) My concern is the rifle brass....I suspect it won't "tumble" well if packed too tight....you won't have that problem with pisol brass. I just kinda guessed at it.....about a tablespoon of dawn, probably half a teaspoon of Lemishine and covered the brass with water.....I ended up adding more water when I added the rest of the media because it was really 'frothy' at first.
-
4895 Powder in NJ?
I've been paying ~$30 for 1 pounders recently. I saw some IMR4895 at Delco Shooting Supply in Prospect Park, PA....probably doesn't help you, but figured I'd mention it.
-
Reported explosion near the finish line of Boston Marathon
I can't recall because I was fairly young....but didn't they nail McVeigh fairly quickly? I thought it was within a couple of days. But I suppose they used the truck's VIN and were able to track it fairly easily....not so much with a pot, a bag and some batteries.
-
Just bought 10lbs of FFg!
Congratulations on making the FBI's watch list! I'm up to 7 lbs of Varget/4350 myself. Speaking of....I'd really like to swap a pound of 4350 for a pound of Varget if anyone would do it.
-
Time and cost of reloading
Nick is right...the cost has more than doubled...tripled for some things. It's time consuming...especially when you're learning. I literally am just getting into it right now....have everything but the dies, which are due to arrive tomorrow. My reason for doing so is the simple fact I can't buy factory ammo. Also, you can customize loads for different situations/guns....and it's a hobby.
-
Help with fence removal
Don't roast anything over a pressure treated lumber fire please.
-
Pillar/glass bedding a 700
Thanks for the tip. For now, I have the 120 and 140gr Nosler Ballistic Tips on the way....they're relatively cheap ($18 for 50) and I know they're decent hunting bullets. I'm hoping to cash in on the RCBS 'Bucks or Bullets' rebate...they're offering 500 Speer Grand Slams with a $300 purchase, but they've recently 'reserved the right to issue the $50 cash rebate in lieu of the bullets'. Regarding powders....Varget seems to be the most popular choice followed by 4350, so I got both. I do have a concern about my bedding job...I'll take pictures and describe the situation tomorrow...long story short, I noticed some 'wet' spots in the bedding the other day, and it seemed soft where it looked wet. I haven't gotten any liquids on it. It's almost as if it's sweating.
-
Any seeing what's going on outside Waco, TX? Explosion at fertilizer plant.
They're now calling for an evacuation of the entire town for fear of another explosion. Before anyone mentions it, on another forum I frequent a video was posted that shows a preliminary flash off to the left immediately prior to the explosion. Conspiracy theorists were claiming a possible missile strike...total BS in my opinion. The video's here: http://tinypic.com/player.php?v=10q9e35&s=6 And here's my explanation... The more I watch that video, especially in slow motion...I believe what happened is that there was a vessel downwind of the fire. This vessel was being heated from the main fire....the heat caused the vessel to overpressure, releasing a vapor cloud from either a safety valve or a vessel failure...then the vapor cloud encounters the heat from the smoke fire plume, which then ignites. The shockwave from this ignition causes another vessel to catastrophically fail in the fire, causing the main explosion. Just my take.
-
Any seeing what's going on outside Waco, TX? Explosion at fertilizer plant.
I just checked that page...that particular post was removed. It doesn't seem to be before it happened though. It was after the "pray for you post". Seems to be more of an environmentalist post after the fact...one that had a valid point. A plant like that has no business being that near a residential area.
-
Reported explosion near the finish line of Boston Marathon
One of those silly (yet interesting) observations from one of those conspiracy youtube videos.... The end of the race and where one of the bombs went off was near 666 Boylston St.
-
Any seeing what's going on outside Waco, TX? Explosion at fertilizer plant.
That was my first thought...I hope the cameraman is still alive. He was indeed way too close. I'm assuming he is because the video got uploaded. I pray this was simply an accident. If not...Boston...the Ricin letters...now this? It doesn't get much more terrifying than the past few days.
-
Obama just got a big FU
This is true.
-
Reported explosion near the finish line of Boston Marathon
It won't come in the form of bans, but limits as you stated. My bet is on some type of proposed legislation controlling the manufacture, sale or possession of any kind of powder....it may not pass, but I'm certain they'll try.
-
Reported explosion near the finish line of Boston Marathon
I'll bet a paycheck on it. The only sliver of hope would be to find out it was firework based....but fat chance.
-
Reported explosion near the finish line of Boston Marathon
I don't think anyone is saying they're Seals. I think they're saying the link is Chris Kyle and his company in particular.
-
Envelope tests positive for Ricin at DC mail facility
Thanks for the clarification. I suppose there would be some lag time due to the security.
-
Reported explosion near the finish line of Boston Marathon
Anyone got a pound of Varget they'd trade for a pound of IMR4350? :girlwacko:
-
Reported explosion near the finish line of Boston Marathon
As did I....I'll be going to make another trip to the LGS today. Damn, I can't afford this right now.....but I've got a terrible feeling it's now or never. Actually...I snuck out of work just now and went.
-
Reported explosion near the finish line of Boston Marathon
From the 4chan link...
-
Envelope tests positive for Ricin at DC mail facility
So I was right....this appears to be the beginning of something larger. I find it difficult to believe that either a) the event in Boston and this aren't related, or b) the incident in Boston triggered someone else to mail these letters as well. Maybe it's just me getting older, but I'm way more concerned now that I was after any previous event like OKC, the anthrax scares or 9/11. This is DOMESTIC...it's not middle easterners.
-
Envelope tests positive for Ricin at DC mail facility
http://www.cnn.com/2....html?hpt=hp_t3 Washington (CNN) -- An envelope that tested positive for the deadly poison ricin was intercepted Tuesday afternoon at the U.S. Capitol's off-site mail facility in Washington, congressional and law enforcement sources tell CNN. Senate Majority Leader Harry Reid said he was told the letter was addressed to the office of Sen. Roger Wicker, R-Mississippi. A laboratory in Maryland confirmed the presence of ricin after initial field tests indicated the poison was present, according to Senate Sergeant-at-Arms Terrance Gainer. Is this the beginning of something larger?
- How to rid mice?