Everything posted by tommyfeds
-
From bad to worse.....story of a squib and a plea for help!
Well, I picked up a 1/4 inch brass rod last night and proceeded to wail on it with a 4lb handheld sledge and NOTHING! I can look into a gunsmith but I'm not sure where who or how much even that's going to cost me. I may try to drill it out myself if I can find a long enough bit. I figure I'll wrap the heck out of it in electrical tape to not scratch anything. I do like the idea of mercury melting the lead. I know nothing of this sort of thing nor do I even know where one buys mercury? Then of course I'll just dump it unto my septic in hopes it makes its way into my well water ;-) but seriously, if that would work I would go that route. I may reach out to tula I guess but um not really sure that's going to get me anywhere. I was discussing this with a more knowledgeable friend and I'm thinking it may not even have been an issue with the powder but with the bullet not being seated properly in the round at all. I never heard the primer go off, just a click. He seems to think it was the force of the bolt that slammed the high seated bullet into the chamber.....maybe , who knows. Sent from my SAMSUNG-SGH-I747 using Tapatalk
-
From bad to worse.....story of a squib and a plea for help!
If wacking it with a wooden dowel and a hammer didnt do anything, Id be scared of the amount of air pressure Id need for that! Not to mention how to connect the hose? Plus it may create some kind of new weapon that Id be arrested for in this state. It seems the consensus is to bang the sh* out of it with a brass rod, wood and all. So no suggestions on a professional? :-|
-
From bad to worse.....story of a squib and a plea for help!
Side note.....where to get a brass rod? HD in Howell didn't have any. Not sure who does or what area the check. Sent from my SAMSUNG-SGH-I747 using Tapatalk
-
From bad to worse.....story of a squib and a plea for help!
No I definitely don't want to go from this end. The muzzle end has a broken dowel in it. And its a splintered break an inch or so down, so screwing into that to pull it out isn't going to work. I really did it good this time. I thought maybe some WD40 down the muzzle might loosen the dowel from the bullet but then again it may absorb into the wood and expand and make it worse. If I can figure out how to get the wood out I would try again with a brass rod. But if not I'll need to bring it to someone. Sent from my SAMSUNG-SGH-I747 using Tapatalk
-
From bad to worse.....story of a squib and a plea for help!
Its 1 1/2 inches in, that's all. I can't believe how stuck this nothing is! Sent from my SAMSUNG-SGH-I747 using Tapatalk
-
From bad to worse.....story of a squib and a plea for help!
The bullet is only about 3 inches from the breech and there is a wooden dowel stuck on the muzzle side. So going in the muzzle is not going to happen. You think a brass rod from the breech end? Seems like it would be too long of a ride to the muzzle.
-
From bad to worse.....story of a squib and a plea for help!
HI All, Was out at Ft Dix last night having a blast with the SKS and the new Tech Sights. Weather was brisk to say the least but it was awesome shooting under the stars.......ok enough with the romance. Round 30 of some Tula I picked up from Dicks went click but no bang. I pull the bolt back and the casing comes out filled with powder but no bullet. I slid a cleaning rod down the muzzle end and got nowhere so that was the end of that. So last night I stripped it down, held it in a vice muzzle down, sprayed some PB Blast in the barrel in hopes to loosen things up and went to bed. As per many threads on the interwebz I went and got me a wooden dowel from the depot. Slid it in the muzzle end and gave a couple of wacks with a hammer. Maybe one too many as the wood snapped and now I have a stuck squib with a busted wooden dowel stuck to the business end of the bullet in the barrel. There was a knowledgable guy at HD who kinda laughed at the wooden dowel idea, he had two SKS's himself. He mentioned there was a device that had a threaded end that would screw into the bullet to pull it out? If that does exist it sounds like an opportunity to hurt myself Im thinkin. I may need to seek professional help at this point. Any advice? Or recommendations as to where/who I might take it to? I live in Freehold so Im pretty central. Thanks all, Im really kinda bummed about this one. I was really having fun with that rifle :-( Tommy
-
AR Poll- AR Newb with no Clue
When I first became interested in an AR (and firearms in general) the whole "thing" was very intimidating. I read countless threads on this very topic and talked myself into buying a complete rifle. Knowing what I know now (which still isnt much at all) Putting together a lower and buying a complete upper is way less difficult then some of the toys Im sure Ill have to put together a month from now. Im still a bit intimidated by building an upper but I think if I sit in front of youtube long enough Ill be able to get a better understanding of the process and decide from there. I say build it, Good Luck!
-
Lower Parts Kit - $29.99
Plus $7 to ship to NJ. Cant hurt to have some spare parts laying around for $37! In for one @ 3:40 http://palmettostatearmory.com/index.php/featured/blackhawk-lower-parts-kit.html
-
Steel case versus brass?
Here's all I needed for my decision ...... http://www.luckygunner.com/labs/brass-vs-steel-cased-ammo/ Sent from my SAMSUNG-SGH-I747 using Tapatalk
-
Ruger Ranch Tactical #5848
Of course, thats only 2 features. My concern is the legality of having all of the evil features because there is no detachable mag. Grenade launcher, bayonet, collapsable stock AND a pistol grip..............Im shuttering just picturing all the evil LOL
-
Ruger Ranch Tactical #5848
So I can bubba my SKS with an adjustable stock, flash hider, pistol grip and keep my bayonet as long as the box mag stays? .......I wouldn't test that one personally. Sent from my SAMSUNG-SGH-I747 using Tapatalk
-
Who goes out on Black Friday?
Its all about the people watching for my wife and I. We're out at like 4am just for kicks. Most of out shopping is done online now as well. Sent from my SAMSUNG-SGH-I747 using Tapatalk
-
To drill or not to drill
I don't wanna bubba, honest I don't! The post is a simple screw out/in upgrade but I didn't plan on running into this snag. It would be too much to shave off the sides unfortunately. I guess I'm just looking for the best way to widen the hole evenly and not butcher it.....just neatly widen Sent from my SAMSUNG-SGH-I747 using Tapatalk
-
To drill or not to drill
Hey all...I picked up a replacement front sight post made by KNS for my SKS (I also have a rear tech sight incoming as well) I was hoping the front sight was just going to be a "remove/replace" type of job but of course its turned into a project. The rounded top part is too big to fit down through the front sight "hood"....it will go in but will not turn. So my question is how can I drill out that hole evenly so it doesn't look like crap? The Rifle is Russian with all matching numbers but I don't think its anything rare or collectable. But I don't want to butcher it either. Thanks for your thoughts, Tommy Sent from my SAMSUNG-SGH-I747 using Tapatalk
-
How is Brick Armory?
Its tough in the summer since they do not have AC in the range. The fans only pump in/out the air from outside. Im a member there and I like the more relaxed atmosphere and larger range area with the bench in the back to keep your stuff. It took a while to get some of the lanes fixed and that was very frustrating but never had a problem getting a lane. Ive never rented anything from them but the selection is small and looks a bit beat up. The staff is always friendly and willing to share any info on whats in stock..........which is limited to mostly consignment milsurps for rifles. Handguns seem to be priced reasonably, I would purchase from them if they had something that I was looking for.
-
Bushnell 32 or Vortex Strike?
I cant speak for anything else, however, i picked up a Strikefire during one of Palmetto's $119 sales and love it. This past weekend I was shooting some steel targets at Dix at 200 yards and actually hitting them! Something to note.........that was the first time for me shooting anything further then 100 yards. As much as Id love an EOTech or some fancy Acog thing--a-majamy (which I had the opportunity to handle and use as well this past weekend) I know that I dont need to spend big money on that kind of technology or power to shoot paper and rubber bouncy targets. But on the flip side I didnt want some knock off copy or cheap-o sight. The Vortex line seemed to fit that bill. Needless to say, Im happy with the purchase.
-
Gonna Shoot Tenafly 10/13, Static Steel...
Sounds like a lot of fun and a good friendly place to start off but this is 60 miles from me :-( is there anything like this down in the middle of the state somewhere? Sent from my SAMSUNG-SGH-I747 using Tapatalk
-
Do-All Metal Spinner and Silhouette targets $35 on woot.com
Not bad considering this is the first time I've attempted to hit anything past 100 yards....and with a Vortex Strike fire! One of those marks is from a .308 the guy next to me was shooting. The rest is .223 & 5.56. Holds up pretty well I think. Sent from my SAMSUNG-SGH-I747 using Tapatalk
-
1000rds Sellier & Bellot 9mm 115gr ammo $242 shipped
Me too! Glad I ordered the speed loader with those 1000 rounds ;-) Sent from my SAMSUNG-SGH-I747 using Tapatalk
-
Do-All Metal Spinner and Silhouette targets $35 on woot.com
If I'm lucky! ;-) Sent from my SAMSUNG-SGH-I747 using Tapatalk
-
Do-All Metal Spinner and Silhouette targets $35 on woot.com
The targets are pretty heavy. It looks like I'm headed to Dix in the morning to point some rifles down range in their general direction. If I hear one little "ping" all day I'll giggle like a school girl, he he. Sent from my SAMSUNG-SGH-I747 using Tapatalk
-
1000rds Sellier & Bellot 9mm 115gr ammo $242 shipped
I just placed an order at 2:55pm.......I threw in a $9 speed loader thingy for my 92fs used the $15 code and a $20 card for signing up and im $232 SHIPPED! SWEET! Thank you!!!!
-
Do-All Metal Spinner and Silhouette targets $35 on woot.com
Its gotta be at the burm. Guy next to me had a big gong and large silhouette last time I was there...... If not then keep an eye on the marketplace :-/ Sent from my SAMSUNG-SGH-I747 using Tapatalk
-
Do-All Metal Spinner and Silhouette targets $35 on woot.com
http://sport.woot.com/offers/do-all-outdoors-shot-target-3 I dont know why I bought these...... The only place I can shoot them is at 200 yards at Fort Dix........let me rephrase that.............. the only place I can aim at them and miss is Fort Dix at 200 yards. These are not the .22 only targets, they claim they are rated as follows...... RATED FOR: Pistol Calibers at a minimum distance of 30 yards .270, .30-.06, etc. at a minimum distance of 100 yards .22-.250, .223, etc. at a minimum distance of 200 yards Soft Nose Lead Bullets Only Cabela's has the spinner on sale for $60 and I cant find the "Body Shot" silhouette for less then $130 on amazon or natchezss.com so it may be a good deal. Body Shot instructions.......... http://www.do-alltraps.com/instruction_download/BS300.pdf