EWC88

Don't mind me asking, what county your in? See how close you are, I can always go for apples lol

Like the other posts above me I've been getting them but have yet to find one I'm in love with. I usually go to canals and just buy cases and also a variety of individual ones.

Wow never knew that, shows how much I know of hunting. Well if you ever get to overwhelmed shoot me a pm lol Side not I have seen prices go up, I try and support a lot of local farmers by purchasing produce from them and also get my eggs from a friend who has chickens, so that helps with cost. Decent amount of local farmers by my gf parents house who have wonderful prices.

Wish I was a hunter like you so I could get my own meat fresh like that. Side note if you ever have "too much" deer meat (assuming your a deer hunter from username) I would buy some off ya if your close lol.

Is the only way to vote is by Facebook? I don't have one I hate them (I know shocker I'm young and hate Facebook lol)

PPQ M1 in 9mm your planning on selling? If so please let me know! Back on topic- 1911 9mm my vote as well

Oh that reminded me, for the grout I will be replacing between tile I heard I should use unsanded since the grout lines aren't thick, is this true? Sorry for all questions!

Thanks everyone for the advice, I realy appreciate it. Last question, should I grout or silicone were the walls meet? So basically the two corners.

Keep tub filled while silicone is drying? Thanks for the advice.

Cool thanks guys. fishnut I believe what you said about cracking because when I look at it I see spots where grout is gone, and then other spots of it their but cracked up. I see lowes trip coming this Friday to get the job done during weekend.

One of our bathrooms shower/tub is going to be getting re-grouted soon and when looking at where the tile wall meets the tub I see there must of been grout there before. My question is what is better for that spot where the tile and tub meet, grout or silicone?

Wow that is crazy!

BLF- recommend any company to get the conversion barrel from? I did a quick google and seen a lot of people saying Lonewolf, but didn't know if you have done this and recommend a certain one.

What are people's thoughts on the G23? Same size as 19 but in .40 cal, thought about maybe doing that so I have one 9mm (PPQ) and one .40 (G23) to start out with.

Has anyone ever shoot a sig P320?

I haven't been able to shoot a PPQ because the closest range to me does not have one to rent. I did shoot the g19 yesterday. Wasn't a bad shooter, my grip wasn't best so it felt lose the first pull but I'm working on that. Otherwise it really wasn't bad. I held te PPQ and loved it. Felt great in hand and yes it is sexy lol.

Yes sorry 320. Well I do plan to add in my collection a revolver and 1911 for sure.

What are everyone's thoughts on the glock 19? Was checking one out today and seemed good in hand and shot good too. Have two permits in that I'm waiting on and I want to get a PPQ for sure but was looking at the glock 19 and the sig P230 that's a striker. Not sure though if I want to do two 9mm.

DeerSlayer- I am so lucky to now have that rust issue (atleast yet). Like you I want to POR-15 my frame so badly but only issue I have is no place to take off bed while I paint the frame. I am thinking for time being to atleast crawl under bed and paint as much as I can of the frame with the POR-15 then hopefully sometime I can figure out a way of taking bed off. Question; can you post a pic of where you drilled the holes?

Looking at getting one as soon as I put my permits in (been so busy haven't been able to). I am hoping though to find/get a M1 in 9mm. I must say though, post pictures of that beautiful weapon!

Not a problem, forgot exactly where you are located. Maybe someone in South Jersey/ philly can chime in on Rocco's.

67gtonut- thanks for replying, I believe if I'm right you are a mechanic so your opinion is highly appreciated. Let me ask you this, if you know, do you know if Rocco's Collision is a good shop? They are the one who quoted me basically the cheapest (not by much) but they were also the only shop who took me around the facility to show me everything in their building, which I thought was very nice and confident in their facility.

I had a thread earlier talking about body work I need done to my truck. I'm wanting to get this completed before this winter and would like everyone's views on it. My other thread people were thinking the quotes I got might of been to much, so I started this thread to show the issues and discuss it all. Now for pics: First picture is passenger side, that's the only part of rust. It was actually hidden and the only way I found out was because there was a clean slice in paint and when cleaning truck (not seeing it) the hose blew the piece of paint off and displayed that. Second and third pic is driver side. Second pic is from underneath. The third pic you can see the scratch with indent at top of bed, that they stated would need filler. Now the quotes I got were from 1,300-3,000 to sand down, repaint. Now the $3,000 place was the only person to quote that high and was only one saying I need a new panel, all other shops quoted between $1,300-$1,500 and all said panel doesn't need to be replaced. All jobs said it will be a week to complete which is fine by me. So from seeing those pics and hearing those prices, do you guys think that is about right?

Not to hijack thread but dear lord is that gun sexy.

I don't know this person at all, was out getting ice cream with my gf and saw this guy with a GS pup so since I've always had them I approached it. Got to talking to the guy for awhile about his pup and he was saying he breeds them and as all sales people just saying what you wanna hear. I've been wanting to go check his place out to get full detail on it but haven't yet. His website is crosskeysk9.com RUTGERS95- how's the pup?! Been meaning to text you about her and more pictures but been so busy!