EWC88

Shouldn't go against him. I've seen several times where people got distribution against them as well and it was just because they had a certain amount, I believe if it's over a 8th then you get distribution as well. I know atleast from my area he would be ok, a friend of mine got arrested for possession and distribution and he was able to get it. Believe it happened when he was 20 and he was 26 when he applied for license.

Yea barrel quality is what I meant. I'll check out that upper posted, I was pretty set on the "look" I was going with this AR (I know that's corny) but I'll check it out and see what I can do to make it how I would want. I'm planning for this build to be finish by Christmas or even a little after because things I may need for this might be some Christmas ideas

Lol I'll make sure I contact you when I do one of those! For the BCM upper I am looking at, mid length now, is the barrel that comes with that fine for my needs do you feel?

Going do this again tonight when I get back, for the little amount of stuff I got out it helped a lot. I will do what you said deerslayer with the tape put on the cord, and your right that other stuff you were saying I have no clue what the hell you are saying lol. Zeke- yea I'll have to make sure I tighten it well

Yes this AR is not going to be precision rifle, after this AR when I know I'll want more I will then have dedicated rifle for specific shooting. This being my first AR I want it to be a all around gun, so going to range with it, and For my HD. Now far as price this is where that's hard for me. Obviously I would like to make it as cheap as possible but having it be a great gun that's reliable so I can spend more on ammo, but I'm a firm believer of you get what you pay for. I figured for gun to be looking at $1k, optics and what not would be additional. Now if I can keep it less than that, that is GREAT in my eyes. Like I have said I know nothing with ARs and doing research I see get chrome line barrels and chrome BCG, or the NiBX. That's only reason why I mentioned those. From responses it seems that I could go for a different coating and basically save money and still have a great BCG.

I'll be honest, because I know nothing about AR's I just saw that upper right away and picked it, I did notice under it was the exact same but mid length not carbine, and I wasn't positive the difference. If mid length is the recommended upper I will go that route for sure. I guess for trigger it's really not a negative whatever option I pick, so I'll browse that idea. Anyone have a recommendation far as BCG? Should I go chrome or NiBX? Or a different route? Also am I missing anything else? Does the butt stock come with the buffer tube for inside?

I actually like that muzzle a lot, I wanted something that wasn't flashy, just some simple and sleek which to me that is, thanks for posting that! I am sorry I am still a noob to this but what is FN and CHF? Because I never done this, since you said the lower doesn't matter as long as its in spec, what exactly do I look for to make sure its all correct?

I need to look more for deals and all but this is what my original thought was so far for the AR with a completed upper: MOE Stock ( whats difference between this one and CTR) Midwest MCTAR-21G2 Mid Length FF handrail BCM 14.5" M4 Carbine Upper Receiver Group Anderson Stripped Lower BCM Gunfighter CH MBUS Rear Sights Not positive on LPK, I know Geissle is amazing from what I read, but doing a lot of research I see people saying when it comes to a person first AR they should not go with the Geissle and should start off on a standard LPK to get the feel and everything. What are your thoughts? Also for the BCG I read that Chrome line is the way to go, but also heard great things on the NiBX, thoughts? I am trying figure a muzzle brake I like, and I want to add a light, red dont and possibly magnifier but not sure. Comments I appreciate

I was debating whether to buy complete upper or just fully build upper and wasn't positive. I'll have to look at everything broken down and come up with list of I decide to build upper myself. What would be good places or brands to look for barrels?

Rob0115- I'm not familiar with all of NJ retarded gun laws lol That's awesome it's legal, now to take it to shop to make sure it's able to shoot!

Cool thanks guys! Next question, legal or not legal in our state?

So I've been thinking about the idea for awhile now and I'm finally going to pull the trigger on doing my first ar. At first I was thinking of just buying one complete but said screw it I would like to "know" the gun so I'm going to build it. The purpose that I want to use this gun for is range and also HD. I wrote up a list of the build which I'll post when I get back home and see what you guys think, there are a couple things I do need help with though which will be posted then too. But my first question for you guys, might be dumb, when looking at a complete upper, and it says 16" is that referring to total length or just barrel? I ask because I was thinking to do a 14.5" barrel and then the muzzle adding the extra proper length, I didn't know if the 16" complete uppers was total length of barrel and muzzle or not.

Curious if someone could tell me what kind of gun this is? Sorry for crappy pic, it was done on my cell phone and the gun was not in the best spot.

Lol, I'm going do it again tomorrow and measure how long it went down and report back if it's normal. I'm not a plumber but I feel how far I went down was not right lol

Trying the good old snake method, it's a pain in the ass but what isn't. First go round I got nothing, second I got a little crap, I need to do it a third time. The snake will not go any farther to I tighten the cable and start cranking it and pushing forward which helps get it going, but I have to go down farther. I must of atleast gone down 15' and got nothing major.

Thanks a lot everyone for your responses. Thanksgiving was different but things are what they are. Thankfully the whole family is handling it well. Wednesday will be the goodbye. Newtonian- sorry about your loss, and I agree with what you said regarding to not put anything off when it comes to love ones.

Amen

Much needed laugh, A+ lol

Found out today my uncle passed away this morning. Very sad day, luckily a lot of household projects are helping me keep things off my mind. He was a funny, loving, caring, intelligent man who will be greatly missed.. R.I.P. Uncle Rocky, you made it as far as you could, wish we could of spent time together tomorrow, or at least one more day, but shit happens. I'll miss you.. Everyone have a good thanksgiving tomorrow, look around your table or house and hug each and everyone in that house and let them know you love them, you never know when things like this can happen.

Going to try all the suggestions! For the snake or even the bladder I would have to put that through my overflow because when I take my drain cover off my tub inside the drain piper (about inch down) there's a cross pattern of metal (screw for cover screws into the middle of it) so neither would fit. I've never taking apart overflow so take it easy on me lol, obviously I unscrew it but since my overflow as the option to close or open the drain, do I do anything specific to get that out so the snake or bladder can go in?

Like title says I need a liquid plumber recommendation that you guys us great luck with. My shower drain is backed up, I've tried draino, fail, I've tried instant plumber, that worked a little. So if you guys had some great luck with anything please let me know so I can try it out!

Going to be calling around tomorrow. Went onto car-part.com and saw there is a close junkyard near me (never knew) and they have some. Going see if it matches my info and go from there.

2002, miles are 124k and some change, I can get exact. Fully dumb to this but what's 8/80 lol. Edit: did Google search on the 8/80 and looks like I don't fall under that.

So I got the lovely code of P0601 which is a bad ECM. Because of this I can not pass inspection (which is due) so I need to get this handled. I looked online everywhere and saw some places called auto module inc, computer resources, etc. Problem I have is when I do reviews first all these companies are apparently the same person, and I see a decent amount of negative reviews so I'm a little nervous with that. Dealers wants close to $1k for ECM then to reflash it. Anyone ever have a issue like this and got a ECM/PCM from some place trust worthy? Really trying to avoid the stealerships cost..

Squirrels- everywhere in my back yard Rabbits- a colony under my deck Neither of which my dogs get, but they have made my mole issue go down