vladtepes - what did that cost to build??

 

Since I've looked into many of these parts already, I can give you a quick breakdown of the cost.

AR15.com Lower ($275)

Magpul MOE + grip ($15.50)

Spike’s ST-T2 Buffer ($33)

Magpul CTR Stock ($60)

Magpul Pmag ($22)

Magpul MOE Handguard ($27)

Magpul Rail Section ($5)

Larue index clips ($30)

Troy Rear DOA BUIS ($100)

Aimpoint PRO ($375)

Haley Thorntail G2 Mount ($70)

Surefire G2 light ($78)

Magpul ASAP ($22)

Magpul MS3 ($42)

Spikes Tactical Upper 1:7 Twist 5.56 Mid-Length Gas System 14.5in Barrel ($570 price with dynacomp)

Spikes Tactical Dyna Comp Muzzle Brake (Permanently Attached)

 

You'll also need a lower parts kit. ($70-80)

A receiver extension(buffer tube) ($35)

Buffer spring ($5)

Castle nut ($6)

 

So when all said and done, it'll run you about $1850.

 

And that doesn't include the tools to put the lower together.

You'll need a mag block and a torque wrench to get the correct spec on tightening the castle nut.

Some will just torque until it's tight, and that's probably fine.

But if you want it done correctly it should be tightened to 40 ft-lbs.

And that front pivot pin is a biotch to install if you don't have a clevis pin.

I bought this kit from riflegear

http://www.riflegear.com/p-806-riflegear-lower-receiver-builders-kit.aspx

I think you just put the fear of building one in me. Couldn't I build it but buy a complete upper and a complete lower and then throw the add ons later?

Would that still save me $$ than buying one complete?

 

I guess seeing the total cost of $1850 pinches a bit. I'd like to be below $1500 if possible and maybe even closer to a max. of $1200 INITTIALLY, doing add ons later and spending less upfront would be best.

 

I find it odd that at another site the people who recommended Colt and BCM both said they didn't like Spikes..didn't give much reason why.

 

I still need to get out so some of the stores in NJ that have these in stock and speak to people face to face. Efingers & Heritage Guild is my only nearby options and don't like either. I might go into Lou's but I find him to be pricey.

Price: $1,046.00 Colt M4 Carbine MOE 5.56NATO 16" barrel Flat Dark Earth - $1046 Colt M4 Carbine MOE 5.56NATO 16" barrel Flat Dark Earth Manufacturer Colt SKU GAG_COLE6920MP-FDE Condition New in Box Action Type Semi-automatic UPC 098289019493 Model M4 Carbine MOE Manufacturer Part Number LE6920MP-FDE

I think you just put the fear of building one in me. Couldn't I build it but buy a complete upper and a complete lower and then throw the add ons later?

Would that still save me $$ than buying one complete?

 

I guess seeing the total cost of $1850 pinches a bit. I'd like to be below $1500 if possible and maybe even closer to a max. of $1200 INITTIALLY, doing add ons later and spending less upfront would be best.

 

I find it odd that at another site the people who recommended Colt and BCM both said they didn't like Spikes..didn't give much reason why.

 

I still need to get out so some of the stores in NJ that have these in stock and speak to people face to face. Efingers & Heritage Guild is my only nearby options and don't like either. I might go into Lou's but I find him to be pricey.

 

I didn't mean to put fear in you for building. You can build a great rifle for much less. But since you asked about Vlad's build, I thought I'd give you the info.

The AR15 lower is one of the more expensive lowers you can buy. You can get a good one for much less. Probably $100.

And there's a bunch of other places you could shave off some cost too.

 

I think some of the Spike's hate comes from their price gouging during the last election buying frenzy. As far as mil-spec, they are good rifles.

And if you're referring to m4carbine, they are mostly made up of professional, mil or LE and they find the frilly stuff Spike's does distasteful. Color fill, crazy logos... etc. They do nothing for a fighting rifle.

 

Personally, for a first AR, I think keeping it simple is good. And getting a complete one built by a reputable manufacturer, you will know it's put together properly.

Adding stuff on later is fine, but keeping it simple at first will teach you what you like and don't like, and ultimately save you money.

Price: $1,163.00 Colt LE6920MP .223Rem/5.56NATO 16.1" barrel 30 Rnds - $1163 shipped $30 Price Drop - Colt Defense has introduced the LE6920MP, a version of its AR-type rifle that arrives with eight Magpul firearm accessories. The rifle will be available in several color configurations. Specifications Action Semi-Automatic Caliber 223 Remington/5.56 NATO Bbl Length 16.1" Capacity 30+1 Trigger Mil-Spec Safety Lever OAL 30.5" Weight 6.89 lbs Stock Magpul MOE Finish Flat Dark Earth Model: LE6920MPFDE Bud's Item Number: 82397

Price: $1,046.00 Colt M4 Carbine MOE 5.56NATO 16" barrel Flat Dark Earth - $1046 Colt M4 Carbine MOE 5.56NATO 16" barrel Flat Dark Earth Manufacturer Colt SKU GAG_COLE6920MP-FDE Condition New in Box Action Type Semi-automatic UPC 098289019493 Model M4 Carbine MOE Manufacturer Part Number LE6920MP-FDE

 

Nope, nothing wrong with it. If you like Magpul furniture, it's the way to go.

Good price too.

But you have to remember, that $1163 is the cash discounted price. If you plan on paying with credit, it'll up the price to $1199?

DSG Arms has it for slightly less.

 

http://dsgarms.com/P...E6920MP-DE.aspx

 

 

Only $5 less, since they charge $15 for ground shipping.

From what I've seen A LOT of people use magpul furniture right? Opinions I've seen is they make some quality stuff.

Did you see the other one I posted above?

 

Oh and Lincoln Park is in Morristown right?

From what I've seen A LOT of people use magpul furniture right? Opinions I've seen is they make some quality stuff.

Did you see the other one I posted above?

 

Oh and Lincoln Park is in Morristown right?

 

Magpul makes quality stuff.

On both my ARs, they have Magpul pistol grips and stocks.

I have MOE+ grip on one with an MOE stock.

The other is wearing a MIAD grip with a CTR stock.

 

I'm probably 15 minutes from Morristown.

keep in mind the price he did for the break down of my gun includes a $400 optic.. a $150 flash light setup.. and a lower that is admittedly $150 more than it needs to be..

 

that in itself is $700.. sop you can BUILD the GUN for a little over a grand.. give or take..

 

thanks for the price break down! it is pretty accurate..

keep in mind the price he did for the break down of my gun includes a $400 optic.. a $150 flash light setup.. and a lower that is admittedly $150 more than it needs to be..

 

that in itself is $700.. sop you can BUILD the GUN for a little over a grand.. give or take..

 

thanks for the price break down! it is pretty accurate..

 

No prob. =)

Bored engineer at work = huge spreadsheet with all sorts of gun parts... hahah.