Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

5.56 NATO In .223 Rem Big NO NO!

Featured Replies

It's what stamped on the barrel not the lower receiver.

It's what stamped on the barrel not the lower receiver.

Markings on the barrel is key.

  • 4 months later...

For almost a decade I fired nothing but military "green tip" 5.56mm and some tracers, quite a bit actually, from the "CAL .223" AR I owned. Never once did I have an issue and when cleaning I do look at the parts. Honestly I'm not worried about it and I've never heard of an issue related to that. I have sold MANY 5.56 rounds to civi AR owners and never heard of a problem with them either.

 

I'm not saying it's not bad for your weapon, but I will say I haven't noticed any extra wear and tear.

I've said it before, and I'll say it again.

 

The markings and literature mean almost nothing. Some .223 reamers are slightly more generous than some 5.56. Then you have 5.56 Sam-r, and .223 Wylde.

 

They all overlap. Want to know, buy a box of 5.56, fire a couple and examine the brass. If it has trouble ejecting, splits the case neck, etc. don't do that anymore.

 

 

  • 5 years later...

I have seen many articles/posts saying you can shoot 5.56 in a .223 Wilde, is this not true?

Yes, you can shoot 5.56 in a .223 Wilde.....All day long!

   Second @JohnnyB I shoot 5.56 all day out of my .223 Wylde, probably over 1,000 rounds. Never had an issue. I do find that .223 tends to be slightly more accurate out of it though.  

  • 2 months later...
On 3/27/2013 at 10:41 AM, jto966 said:

I have a suggestion or question. Couldn't you just take a 5.56 bullet and see if it will fall through a .223 barrel ?

Seems simple enought to me. Since it's .110 bigger - It's not going to fit and drop out the other end.. right?

5.56 mm = 0.218897637795" 

The 5.56 mm bullet better fall through a .223 barrel since its about 4/1000th smaller! I am not a machinist so I am not sure if that's a significant delta. I think the 0.110" is a linear (horizontal) dimension not a diameter/caliber dimension.

0.223" - 0.218897637795" =  0.00410236"

1 hour ago, dino71 said:

5.56 mm = 0.218897637795" 

The 5.56 mm bullet better fall through a .223 barrel since its about 4/1000th smaller! I am not a machinist so I am not sure if that's a significant delta. I think the 0.110" is a linear (horizontal) dimension not a diameter/caliber dimension.

0.223" - 0.218897637795" =  0.00410236"

No.. dear god no. 

Look man the diameter in a  cartridge name isn't really meaningful without a spec. Some are the size at the lands, some are the size at the grooves, and some are the bullet diameter that gets smashed down somewhat in the shooitng and may not actually really match either the lands or grooves. Some are just a convenient approximation of the above. Ignore the name unless buying boxed ammo, and read the spec. 

For example 9mm parabellum is 9mm right? That's  0.354331 inches. The bullets are .355 whcih is 9.01mm. The saami spec for land diameter is 8.82mm and the groove diameter is 9.02mm. 

So yeah.

 

 

23 hours ago, raz-0 said:

No.. dear god no. 

Look man the diameter in a  cartridge name isn't really meaningful without a spec. Some are the size at the lands, some are the size at the grooves, and some are the bullet diameter that gets smashed down somewhat in the shooitng and may not actually really match either the lands or grooves. Some are just a convenient approximation of the above. Ignore the name unless buying boxed ammo, and read the spec. 

For example 9mm parabellum is 9mm right? That's  0.354331 inches. The bullets are .355 whcih is 9.01mm. The saami spec for land diameter is 8.82mm and the groove diameter is 9.02mm. 

So yeah.

 

 

Thanks raz-o, there should be a class somewhere to tech this you get really get in the weeds with the numbers. Do you know if there is also a ISO 90001 standard for this topic?

25 minutes ago, dino71 said:

Thanks raz-o, there should be a class somewhere to tech this you get really get in the weeds with the numbers. Do you know if there is also a ISO 90001 standard for this topic?

SAAMI

  • 1 year later...

Just a word of advice, if your shopping for an ar15 upper just save your time and money and get a 223 wylde upper. Their plentiful, generally affordable and will save you accuracy headaches with cheap 223 ammo. 

31 minutes ago, marlintag said:

Just a word of advice, if your shopping for an ar15 upper just save your time and money and get a 223 wylde upper. Their plentiful, generally affordable and will save you accuracy headaches with cheap 223 ammo. 

yes. .223 wylde 1 in 8 rifling. This is the way. 

  • 9 months later...

So if your AR barrel reads .223/5.56 you would assume you can use both, no? Which one is your barrel chambered for? 

2 hours ago, charleslee said:

So if your AR barrel reads .223/5.56 you would assume you can use both, no? Which one is your barrel chambered for? 

Yes . . . You can use both if both are listed . . . 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.