Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Breaker bar or real 4X lug wrench..?

Featured Replies

Do mechanics in NJ not believe in using torque sticks with impacts?  Good grief, I'd be taking my car to a different shop if I saw someone with just an impact putting my lug nuts back on.

 

Eurotire in Bloomfield is the only shop I've seen that uses a torque wrench.  One of the reasons I go to them for tires and alignments.

67gtonut, which shop do you work at? Most of the Rockaway shops are hit or miss.

When your done put some anti seize on the studs before you screw on the lugnuts. You will thank me next time you try to remove them.

i respectfully disagree. lugs are the one place this side of headbolts where i wont use antisieze. on a big truck yes, but on a smaller vehicle feel you are better using proper torque then antisieze

 

Do mechanics in NJ not believe in using torque sticks with impacts?  Good grief, I'd be taking my car to a different shop if I saw someone with just an impact putting my lug nuts back on.

ive met alot of bosses that were sworn against them, mostly older guys who swore just by the impact

 

I agree. Too many people are lazy and use the wrong tool for a job. Dealers and shops are the worst offenders and they are supposed to be the 'pros'.

 

Using hand tools on the overwhelming majority of mechanical work will save you headaches. Not foolish, just fact.

and most bosses push for efficiency and speed, and worry about the headaches later

i respectfully disagree. lugs are the one place this side of headbolts where i wont use antisieze. on a big truck yes, but on a smaller vehicle feel you are better using proper torque then antisieze

 

I have used antisieze successfully for many years now on lugs without any negative repercussions.

I have used antisieze successfully for many years now on lugs without any negative repercussions.

 

Can't accurately torque them with anti-sieze. Dry, clean threads is all you need

I change my wheels 2x a year between snow/summer set up. Never ever used anything on the threads, there is no need with proper torqued bolts. You should be torquing them correctly above all.

I use a Rigid pipe wrench and a can of spinach.

 

 

popeye1.gif

i respectfully disagree. lugs are the one place this side of headbolts where i wont use antisieze. on a big truck yes, but on a smaller vehicle feel you are better using proper torque then antisieze.

Who said it has to be one or the other? It's not called anti-torque. The purpose is to prevent parts from "seizing" together over time, via corrosion at the interface of two metal surfaces. Torque has nothing to do with.

 

Can't accurately torque them with anti-sieze. Dry, clean threads is all you need

Actually, that's sort of backwards. DRY threads are a good way to get INACCURATE torque readings. Proper torqueing is not really about the "twisting" force your measuring/feeling. Its really a question of proper STRETCH of the bolt material, which applies pre-load, and clamping force.

Dry threads have increased friction, possiblyb leading to "galling" of the metal-to-metal surfaces. Micro- welds are even possible in extremem circumstances. These things all lead to incorrect torque readings, where it APPEARS a bolt is torqued properly, because the wrench is "seeing" the selected rotational resistance, but the bolt has not been properly stretched.

This is also the whole premise/benefit to studs instead of bolts. The studs are only installed finger tight, and then the nut provideds a direct clamping load, instead of "twist". You'll find a much lower recommended torque setting, in applications where studs are substituted for bolts (heads).

 

Any "critical" part that needs to be torqued, needs to be lubricated. Not that anti-seize is the best lube, but it also provides corrosion "welding" protection. I've had to beat wheels off of rotors and hubs, because the last guy didn't use anti-seize.

 

Its like those commercials for the hot sauce, with the little old lady:

"Anti-seize. I put that sh!t on everything!"

Its like those commercials for the hot sauce, with the little old lady:

"Anti-seize. I put that sh!t on everything!"

 

After beating the old front rotors off my wife's car, I applied anti-seize liberally prior to installing the new.  I also had installed some aftermarket aluminum valve caps on my car which has TPMS and aluminum valve stems and found out the hard way that I should have used anti-seize.

 

I belong to your school of thought.  If I want it to come apart later, I use anti-seize.

I always put a dab of anti-seize on the studs for the lug nuts.  My wheels haven't fallen off, and I've always been able to get them off by hand with a lug wrench.  My dad puts anti-seize between his aluminum wheels and the steel brake rotor too, it keeps the wheel from getting stuck to the rotor. 

 

I guess these mechanics who tighten them way too much with the impact guns want their customers to come back for the warped brake rotor replacement. 

Barms, I am in Wayne also.  PM me is you want to come down and have my give it a try with my air impact gun and if necessary, my old school breaker bar/pipe combo. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.