IWI X95

 

 

General Info:

The new Tavor® X95™ is the next generation bullpup from IWI US, Inc. Upgrades and enhancements from the original TAVOR® SAR include a new fire control pack with a 5-6 lb. trigger pull, repositioning of the ambidextrous mag release to an AR-15 location, a forearm with Picatinny rails at the 3, 6, and 9 o’clock positions with removable rail covers, relocation of the charging handle closer to your center mass, a modular Tavor style pistol grip that can be swapped out to a standard pistol grip with traditional trigger guard and a smaller, lower profile bolt release button.

Caliber 5.56 NATO

Action Semi-auto, Gas Piston

Operating System Closed rotating bolt, long gas stroke on piston head

Magazine Type Polymer NATO STANAG type. (Note that the Tavor X95 rifle is assembled in the US from imported and US parts under 18 U.S.C  § 922®. You should only use magazines made in the USA in your Tavor X95. Use of an imported magazine may put you in violation of 18 U.S.C § 922®.)

Barrel Material Cold hammer forged, CrMoV, chrome lined

Barrel Length 16 ½"

Overall Length 26 ⅛"

Weight 7.9 lbs.

Rifling Right hand, 6 grooves, 1:7 inch twist

Stock Type Reinforced polymer bullpup configuration

Sights Folding front sight (blade) with Tritium insert and rear sight (aperture)

 

https://iwi.us/Law-Enforcement/Firearms/X95.aspx

------------------------------------------------------------------------------------------------------------------

 

IWI SAR

 

 

General Info:

 

Tavor® SAR Flattop In Flat Dark Earth FD16 The TAVOR® SAR Flattop incorporates a full-length Picatinny style top rail in addition to the standard short rail mounted at a 45° angle opposite the charging handle.

Caliber 5.56 NATO

Action Semi-auto

Operating System Closed rotating bolt, long gas stroke on piston head

Magazine Type Polymer NATO STANAG type. (Note that the Tavor SAR rifle is assembled in the US from imported and US parts under 18 U.S.C  § 922®. You should only use magazines made in the USA in your Tavor SAR. Use of an imported magazine may put you in violation of 18 U.S.C § 922®.)

Barrel Material Cold hammer forged, CrMoV, chrome lined

Barrel Length 16 ½"

Overall Length 26 ⅛"

Weight 7.9 lbs.

Rifling Right hand, 6 grooves, 1:7 inch twist

Stock Type Reinforced polymer bullpup configuration

Sights Folding front sight (blade) with Tritium insert and rear sight (aperture)

 

https://iwi.us/Tavor-Test/TAVOR-TSFD16.aspx

------------------------------------------------------------------------------------------------------------------

 

User Manual:

X95: http://iwi.us/iwi/media/Manuals/032016-Tavor-X95-Manual.pdf

 

SAR: https://www.iwi.us/iwi/media/Manuals/TAVOR-SAR-Manual-V08-011-01-09-53RevA.pdf

 

OEM and Aftermarket Parts &Support:

1. https://www.iwi.us/products

 

2. http://www.gearheadworks.com/

 

3. https://www.midwestindustriesinc.com/

 

Additional Thread Information Archive List:

1. http://www.njgunforums.com/forum/index.php/topic/76333-to-tavor-or-not-to-tavor/

 

2. http://www.njgunforums.com/forum/index.php/topic/84602-original-tavor-upgraded-vs-new-x95/

 

3. http://www.njgunforums.com/forum/index.php/topic/85695-x95-tavor-buttpad/

Anything else to add on first post? Tried to put stuff on there thats good for reference.

 

And of course, this thread is useless without pics! Heres mine:

 

 

 

Dan;
The specs listed are for the Version available in Free states, i believe.. Note it says 13" Barrel. I believe the NJ compliant model we see here are longer, heavier, etc..  Not sure if specs are available for that model?

Dan;

The specs listed are for the Version available in Free states, i believe.. Note it says 13" Barrel. I believe the NJ compliant model we see here are longer, heavier, etc..  Not sure if specs are available for that model?

 

Good eye! Thank you, fixed.

Good eye! Thank you, fixed.

Sucks i had to say something/ it even had to be fixed.... What BS.. Haha.

Great idea, otherwise. Will be nice seeing some pics up on here.

Two different set ups.

 

 

 

Sent from my iPhone using Tapatalk

Only thing I'm surprised and concerned with is the polymer rails on the hand guard. 

The SCAR 16/17 seem to manage with poly rails.

Seem fine. Not like you are mounting an optic on them. I cooked mine a few times and not one drip of melted plastic. [emoji6]

 

 

Sent from my iPhone using Tapatalk

One of you need to let me test fire one of these

Getting ready to remove hand grip on x95, does the screw holding in place have factory locktite on it? I believe the butt pad does correct? Any other tips for replacing grip please let me know

YAY! HAPPY TO SEE THIS! This is my current pup x95

 

 

This was my first bullpup an 18" tavor, I sold it and regretted it had all the goodies...

 

Nice! Yeah I'm keeping both SAR and x95. They're both two different rifles to me.

Just installed the pistol grip for X95. Anyone else have a slight gap on the trigger guard end or did I install it wrong?

Heres picture of the gap

 

Go look on the Tavor forum. I know someone had that issue but was able to resolve it. Don't remember what the solution was, just that there was one.

I swapped for the 13" top rail and short forearm for the x95..

 

What to do you think looks wise? It feels and seems to handle very nice. I have not gotten it to the range yet though.

 

The swap took all of 5 minutes.. my break is pinned on.. I was able to swap over the pinned break. very easy to switch back and forth. In the longer formed there was a muzzle bushing right behind the muzzle break. I left it off for now... going to see if there is any accuracy improvement. Others have reported no noticeable change in accuracy.

 

Anyone have any experience with an eo and magnifier on one of these? Wondering if you can see alright with a good cheek weld, as it will sit a bit low compared to it on my AR. May have to put an acog on it.

Anyone have any experience with an eo and magnifier on one of these? Wondering if you can see alright with a good cheek weld, as it will sit a bit low compared to it on my AR. May have to put an acog on it.

I have shot one with the Meprolite version of the EOTECH and it's a perfect set up for this rifle.

Anyone have any experience with an eo and magnifier on one of these? Wondering if you can see alright with a good cheek weld, as it will sit a bit low compared to it on my AR. May have to put an acog on it.

 

I've shot my SAR with eo/aimpoint with a magnifier it works but had a little more trouble than on an AR.  Might be my chubby cheeks though

Guess ill have to test it out and see.

Lambo2936, no pics of the new Tavor?!

We need a bullpup section

Lambo2936, no pics of the new Tavor?!

Soon.. its hiding from the wife LOL.

Its not complete. Im pretty sure im gona swap out the sight from a 1-4 m223 thats on it now to either an eo or acog. Idk which. Just dreading sighting the acog in on my DD after i just sighted in the eo on it lol

Anyone have experience with Midwest Industries Ejection Port Cover seen here?

 

 

Does this fit for X95?

Not sure, but there is another company that makes them. The name eludes me at the moment. People usually install them to avoid gas in their face when using a suppressor. I have never had that happen on mine. See no reason unless you are going to run one.

Try Manticore or Gear Head Worx

 

Sent from my iPad using Tapatalk Pro

I think I want a 95

I think I want a 95

Take your pick. 95 pretty much runs down the whole east coast. [emoji23]

Plenty mile markers to pick from.

 

 

Sent from my iPhone using Tapatalk

Lol... were did you get that short forearm for the x95? Looks good i like!