Everything posted by lunker
-
CZ handguns
Bryan, CZ's are the ****. I really liked mine (of course it's sold now). The compacts (CZ75B Compact, PCR, etc) are my favorites. The full size have steel frames and slides. The compacts have steel slides and alloy frames, except for the 75B (the one I owned) that has a steel frame. They are extremely well made and very accurate and easy to shoot. The only thing that could stand improvement is the trigger. It has a long double action pull, and the single action causes the hammer to pull back a little before release. It's not horrible, but it could be better. A $35 Bill Springfield trigger job (http://www.triggerwork.net/pistols.html) later, and my gun shot like a champ. The single action CZ's have a great trigger right out of the box. JonF and Jermz (Jeremy) have single action CZs. Keith (NJPilot) at BA and Guy at Shore Shot both have DA/SA CZs. Try it at Shore Shot. I am sure you'll like it. They are the only other non-poly gun around these days besides Sig.
-
Generation 3 vs Generation 4 Glocks
Good video Some differences between Gen 3 and Gen 4. Some possible problems with Gen 4.
-
Anyone shoot or have 147 gr 9mm?
The 147 grain has a bad rap for self-defense ammo. The article below is from 2002, so I don't know how much has changed in bullet technology since then. The author is a respected expert in the field though. Article by Massad Ayoob 9mm Parabellum 147-grain: The faddish adoption of the 147-grain subsonic 9mm took more than a decade of street experience to stamp out. Sometimes it worked, sometimes it didn't. I saw cases where even the vaunted Black Talon overpenetrated and failed to do the job. The great majority of departments that issued it, including its parent agency, the FBI, have now either gone to .40s, .45s or .357 SIGs, or have gone to a more effective, lighter bullet/higher velocity 9mm round. In good conscience, I cannot recommend any 147-grain subsonic 9mm round for self-defense or police service. /-125-grain: Caught between cops who believed in Fackler (slow 147-grain) and those who believed in Marshall (fast 115-grain), many police decision-makers have decided to split the difference and go with something in the mid 120-grain range. The best results have been with the hot P and P loads at around 1,250 ft.sec. NYPD adopted the hot CCI Gold Dot 124-grain and reports excellent street results. Denver PD has adopted the same round for its officers who choose the 9mm from the optional weapon list. Winchester's Ranger Talon 127-grain P has also earned an excellent reputation. Forward-thinking, research-intensive departments, such as the San Bernardino County (CA) Sheriff's Department, have adopted it for deputies who carry 9mms. But, as noted, the Ranger Talon series is sold only to law-enforcement agencies. 115-grain: Federal's 9BP, a 115-grain at 1,160 fps, is the one standard pressure 9mm load that has been around for roughly a quarter century without any horror stories of stopping failures. Every shooting with it that I know of has resulted in a stopped offender, usually with mushroomed bullets lodged in the far side of the body. Last I knew, New Jersey State Police (HK P7M8) and Philadelphia PD (Glock 19s) were still using it with good results. However, the best results in this grain weight, and indeed in the caliber, have been logged with the Illinois State Police Load. A 115-grain JHP at 1,300 to 1,350 fps, it is available to police from Winchester, Federal and Remington; and to civilians from Pro-Load, Black Hills and others. When you see an autopsy report that indicates the cause of death as "cardiac maceration," and there was only one 9mm round fired, you can be pretty sure it was one of these rounds. When in doubt: Pro-Load Tactical (1st choice) or Federal 9BP 115-grain JHP http://findarticles.com/p/articles/mi_m0BQY/is_3_48/ai_82551648/?tag=content;col1
-
My son's ink
Actually, this very topic was in a very funny episode of "Curb Your Enthusiasm". http://www.nytimes.com/2008/07/17/fashion/17SKIN.html
-
New Chinese Import :)
Awesome Matt! Congratulations to you and your wife.
-
.357 Suggestions
I believe the S&W Model 19 may be the finest, best balanced 357 mag revolver ever made. I regret having sold mine. What else is new?
-
North meets Central meets South!
I'd love to. I think either date is good for me.
-
Possible 9/18/10 Ft. Dix Trip
Sorry, I have commitments Saturday. I'd love to go otherwise (and I have loads of 7.62x39).
-
vz24 is in...
Nice. I'll help you sight that one in at Dix too. I had to look this up on Wikipedia. Sounds interesting and well made.
-
beretta 92a1 or 96a1
That's awesome. It is nice to have a friend in the business. I pay $50 ($35 for transfer and $15 for NICS) at Shore Shot. And they are one of the best prices around for storefront shops.
-
beretta 92a1 or 96a1
Actually, Ken was being very diplomatic about Ramsey Outdoors. I don't know if you have an attachment to them, but their reputation is a lot worse than he made it out to be. I grew up in Bergen County and have avoided them after my first couple of experiences there. If you do a search on this board, you will see many people's experience there mirrors my own. There are enough shops in New Jersey owned by nice people that want your business and are willing to work with you on a price, that you don't need to settle for anything less. I guess what I'm saying is... If you are going to Ramsey only because they are close, you should check out other places too. There is a google map on this site of gunshops all across New Jersey. You might also want to consider the firearm price request feature on this site. There are several firearms dealers that are sponsors here that will give you a price on the gun you want. I would not be surprised if the delivered price works out to be SIGNIFICANTLY lower than what you are being quoted. Good luck on your quest. By the way, if you get a 92FS, you can buy a separate slide assembly that will allow you to shoot 40. You would also need a 40 mag. Check the Beretta Forums. They are on sale there pretty often.
-
beretta 92a1 or 96a1
This is a question that starts all kinds of online caliber wars. I personally do not care for 40S&W. I have owned a CZ and an HK in that caliber and have since decided that it wasn't for me. I sold the guns and stick with 9mm. If I want something more powerful, I go with 10mm. I find 9mm to be easier and more enjoyable to shoot, and don't feel undergunned with Speer Gold Dot +P ammo. As for ammo availability, 40 is more expensive than 9mm but I can tell you from experience that it was the one caliber always in stock during the Obama ammo shortage. I would shoot both before you spend the $$$. I have gone through a lot of guns that weren't "just right" for me.
-
GLOCK PARTS - Last Call
It was fun, but it felt like a Desert Eagle when that mammoth slide went back and forth. Ka-chunk! Somehow it just felt clunky and didn't seem mechanically smooth to me (although it never FTF/FTE once I threw in a 22lb spring in it) I will most likely pick up a Gen 4 Glock 29SF when they come out.
-
GLOCK PARTS - Last Call
Frank, I swapped the 10mm Glock 20 Longslide for a Ruger 10mm Buckeye Blackhawk, so I am set for now. Thanks for thinking of me. Chris
-
Thanks gun dealers
I've had nothing but good experiences with them as well. Quick responses at excellent prices!
-
What caliber for a Saiga conversion?
That's true. I might buy it.
-
What caliber for a Saiga conversion?
I was undecided until the last minute which to get. They all have their pluses. I don't have any other guns in 223 or 5.45. Both my PAP and my VEPR in 7.62 chewed the heck out of brass (although my SKS leaves the brass just fine). It seems to be a known issue with these guns . Some people fashion plastic guards near the ejection port so the brass doesn't get dented on the way out. That has stopped me from reloading in 7.62x39. Seeing as how these AKs and SKS' can digest anything you put through them, I figure I can skip that hassle and just buy cheap ammo. Nowadays, cheap 223 ammo is everywhere.
-
1 Trigger pull, 2 shots on 1911 Gold Cup
The trigger reset on a 1911 is very shot. It is easy to squeeze off unintentional second shots when you have a light trigger with a short reset. If you have stout loads in the gun, that makes it even easier. I have to use good trigger control on my 1911 in 10mm. It is VERY easy to keep pulling the trigger when the recoil is moving the frame.
-
"Long range" rifle...
My Rock River Varmint A4 AR was the easiest gun to shoot well I have ever owned. It was 1/2 MOA from a steady rest at 100 yards. I have a Savage Bolt gun that has a steeper learning curve (which increases the satisfaction when you do shoot well with it, IMO). In the end, I suspect the Savage will hold up better accuracy at a distance, but that has more to do with the caliber difference than inherent precision of the gun. I don't think a quality AR takes a back seat to a bolt gun until the distances start climbing. Wait, did I just repeat what Sane said?
-
What caliber for a Saiga conversion?
Ha Ha. I liked it Pete, but I thought it would be useful to have a rifle in a caliber that every store carries. 7.62 is close, but I already have the VEPR in that. As for 223 being a varmint round , well... Shane posted a nice link about the effects of 223 on humans. Warning, it is **graphic** http://www.timawa.net/forum/index.php?topic=17111.0
-
Ft Dix today 9/15
You guys suck!
-
"Long range" rifle...
Shane, your lower end is my upper end. Those FN SPRs are really nice.
-
"Long range" rifle...
My vote is for the Savage Model 10 precision Carbine. http://njgunforums.com/forum/index.php?/topic/18286-fort-dix-this-weekend/page__view__findpost__p__242069
-
What caliber for a Saiga conversion?
Thanks Prick!
-
What caliber for a Saiga conversion?
Don't worry. I go through rifles like **** through a goose. There's always time for me to get a 7.62 Saiga.