Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

lunker

Members
  • Joined

  • Last visited

Everything posted by lunker

  1. I see them at Shore Shot from time to ime.
  2. Unfortunately, I don't have all or even many of the answers here. I don't think handling fully copper jacketed bullets when loading at home would cause a problem since nothing is airborne. The nitrile gloves Vlad uses are a pretty good idea though. I also think that the cleaning solvents that become saturated with lead being removed from your guns would be something to be minimized through the use of gloves. My dillon has a primer catcher, and those spent primers are a source of airborne lead when you empty them. The same is probably true of the vibratory brass cleaners. I have switched to liquid cleaning with stainless steel media. Setting it up the vibratory cleaner outdoors is a good option too. I was shooting once a week at Shore Shot. I will still go once in a while because I meet people there and because I like the fiolks who work there and the owners too. The rest of the time I will be content to sweat/freeze outdoors, depending on the season.
  3. I don't bother with 38 special because I don't want to readjust my dies. If I want light loads, I load 357 light. I aminly use Blue Dot or 2400.
  4. This is being created as a public safety message for those of us that enjoy shooting. I have posted snippets of it before in various threads, but figured I would make a more formal post with the idea that a larger audience might see it. Nearly two years ago I was getting a routine physical at my Doctor's office. I offhandedly mentioned to him that I shoot and reload recreationally and am exposed to lead often, both by handling cast lead in reloading and breathing in the fumes at indoor ranges. He suggested that I get a test for lead in my body. One was a blood test. This is more of a point in time measurement that sees if you have been exposed to lead recently. Unfortunately, low lead levels in the blood is not necessarily a good test of lead levels in the body. One of the reasons lead is so bad for us is that it easily attaches to cells in the body. And it stays there. The results came back and I was very high. I am thankful for this test then because if I took a break from shooting, the lead levels in my blood would gradually decrease and would go down to normal, or close to it and I would never have known to check any further for lead. Since my levels were high, I did what is called a urine challenge. It basically involves taking a a few pills of a chemical called EDTA. This chemical is used in chelation and it extracts heavy metals from the body and allows them to be excreted in urine. The urine can then be tested for levels of heavy metals. The sample was sent to labs and came back off the charts. The recommended level of lead in the body is < 10 micrograms per gram of sample. Mine was 700. The doctor had never seen a number so high. My levels were high for other heavy metals too, like antimony (an ingredient in gunpowder) and aluminum. Since this past December, I have been undergoing regular chelation treatments (i.e. my own personal lead remediation), which involves receiving a 1/2 hour IV drip of an EDTA and vitamin B12 cocktail. I have gotten the number from 700 to 400, and now down to 60. I will be continuing until I can get that number down to 10 or less and perhaps periodically afterwards too. Personally, I don't feel like I have ever felt the effects of heavy metal toxicity. Does that mean there were none, I assume not. But heavy metals do effect children and pregnant women in the form of learning disabilities and birth defects. I have a lot of friends on the site who have been asking me to come shoot with them. I have really been trying to avoid going shooting until this is finally under control. The big debate is the source of the lead posioning. My doctor believes that growing up in the industrial state of New Jersey already hamstrings us and raises our numbers. I have done some reading on absorption of lead, and it is not through the skin. So I would only attribute some of it to my loading lead bullets (although I have switched to complete metal jacketed for loading). My belief is that the majority came from shooting in poorly ventilated indor ranges and breathing in vaoporized lead dust. Even if my bullets are fully surrounded with copper, the guy's next to mine aren't. And I have no doubt that I am breathing leadclouds from everyone else around me. I am not really interested in pinpointing the exact cause. I am sure that it is some combination of all of the above. I also don't know if I am more susceptible to this lead posioning for some reason than the general public, but I do know that I will make it a rare occasion to shoot indoors now. Anyway, hopefully this story will make you take an extra second to ask your doctor for a lead test the next time you go for your checkup. If anyone wants to ask a question privately, or even find the name of my physician (since most doctors do not have regular on-site chelation treatments), please feel free to PM me.
  5. Typical bureaucratic solution. By tightening one bolt they have loosened another. A 12lb trigger pull on a Glock certainly reduces the possibility of a negligent discharge. By equal amounts it also reduces the possibility of hitting what you aim at unless you carefully prep and stage the shot first. Don't expect great followup shots either. The next time they print the shots fired hit percentage for the NYPD (around 10%), factor in their awful guns. I wonder if less bysrtanders would be hit if the NYPD used a gun with a lighter trigger. Perhaps there would be less misses on bad guys, and so less strays floating around.
  6. Solomon's in Farmingdale.
  7. lunker replied to SpacemanFry's topic in Handguns
    or send it back to the factory a few times, and still never get it running correctly, and eventually just have to sell it. Which is what happened with me.
  8. lunker replied to Sandy's topic in Handguns
    It was only my second or third range session. The problem is the safety flags range of motion is directly in line with recoil motion. Other companies like Ruger and Taurus have ILS too, but you never hear complaints about them. A lot of S&W owners drill out the locks.
  9. lunker replied to Sandy's topic in Handguns
    I am not an S&W hater, but their revolvers with locks can be problematic. If you do a search on Smith&Wesson Internal lock problems, you will see a LOT of results. Of course some of it is the internet amplification effect, but it is real. I had a Model 629 lock seize on me while shooting at Shore Shot. At the range, it's no big deal. Using it to defend against an attacker, not so much.
  10. I am no 1903 guru, but as usual Bob may be on to something. The early Springfields 1903 A1 (?) are good for wall hangers only because of their soft steel.
  11. Awesome! The Bayonne Bleeder. How is this the first Chuck Wepner reference I have ever seen on nJgf?
  12. lunker replied to Sandy's topic in Handguns
    I feel like the full underlug on the 357 wheel guns makes them very nose heavy. I much prefer the partial underlug on the Model 60. Now if I were going hunting with a 8" 357, then I would want it for the weight and steadiness on longer shots.
  13. It is up to the discretion of the Police Chief in your town. If you live in an anti-gun town you can expect him not to extend it. In many towns it is as simple as going to the station and geting a signature on the spot.
  14. lunker replied to Sandy's topic in Handguns
    You got the Pro series too. Sweet.
  15. I called them and had them apply it to my order. It wasn't a problem.
  16. It is not that the back of the grip is further back, it is that the grip is as wide as a hand grenade, so my fingers are pulled back by the sheer girth of it. Also, I have read reports that Burwell actually uses the Apex sear these days. Since what he does is a mystery, no one but him can confirm or deny unless they take thier gun apart (admittedly a pretty easy task).
  17. Basically, sending a gun to Dan Burwell is a faith based operation. If I had not heard stellar reviews and testaments to the man's work and his character, I would've been annoyed. You use his website to send him a request to have your gun worked on. There is no listed phone number to contact him. He asks you which services you want, then tells you when to send it in. I sent in a request, had a response a few days later, then sent him my pistol the next week. He had the gun for two weeks (one longer than he needed, due to him not shipping it immediately). I sent him a few e-mails along the way. One to let him know it shipped. A followup one to let him know that a delivery attempt had been made and the package was at his local FedEx office. The following week I asked for a rough ETA. He replied that it would be test fired and shipped on Monday. I waited and heard nothing, so I e-mailed the Friday after that asking about it. I did not get a personal response or explanation. The next day I did get a FedEx e-mail letting me know it was on its way. The day after that it arrived. Despite my annoyance at limited communication with the man, his work on my M&P was nothing short of spectacular. My only regret is that I got the vanilla trigger job (i.e. without JonF's forward trigger set). This has forced me to go to the larger backstrap (which I find less comfortable than the medium) to have proper trigger reach. All in all, I would recommend this. If you are less than patient (like me), know that you may end up being annoyed along the way.
  18. You only fill it out your first time there and they keep it on file. Maybe instead of posting in the public thread, send a PM to Shore Shot. Tell them about the disclosure form. Knowing the owners there, they would want to know and would take steps to make sure it is corrected.
  19. Andres, you are welcome to try out my Burwell M&P 9L any time.
  20. That's a shame. Post it on shore shot's sponsor thread. I'm sure the owners would want to know if their paid employees are just sitting around bullshitting and not helping customers.
  21. Thanks. One if them looks perfect. I was looking to be able to use my existing TLR light that makes use of a rail.
  22. Some places will look at you funny. I had Phil at Brick Armory ask to inspect my mags when I brought in pinned 30 rounders. It ended up not being a problem because it was pinned.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.