Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

KpdPipes

Members
  • Joined

  • Last visited

Everything posted by KpdPipes

  1. Ahhh, but by Statutorily allowing MG's they can SAY they dont have a total ban on NFA items..even though it is a Regulatory and Practical Ban, as it'd be easier to get a Carry permit for every non-LE member on this board, than an MG card.
  2. Maybe they got it before the Requirement for the permit was written into 2C, I've never come across anyone with an MG card in or out of LE, and I;ve interacted with a LOT of guys over the years. The ONLY possibility I can think of are the Security guys at Salem, Oyster Creek, and Hope Creek Nuke plants, and even then I believe the NFA goodies are papered to DOE, not the Security Companies.
  3. My old HS did away with it's Rifle team because of 2 reasons, #1, Insurance, Nobody would give them any for a HS Rifle team, and #2, the local PAL range was torn down. IIRC by the time everything collapsed, there were only around 7 or 8 HS teams left in the league, and they all pretty much went out around the same time.
  4. I have 2 of the Hornady measures, one free-standing one on my LNL Baffles in both fell freely to the bottom of the measure
  5. http://www.ammonow.com/handgun_5.7x28_page_1.html http://www.basspro.com/Federal-Ammunition-5-7-x-28mm-Polymer-Tip-Handgun-Ammo/product/10206995/ http://gun-deals.com/ammo.php?caliber=5.7x28
  6. You're the one who said that Christie hadnt hurt us, not me. he was just Sneakier about it. If' I'd have had my Choice Lonegan would've been Governor. I had HOPED Christie would ne Neutral, I knew better as soon as he appointed Dow.
  7. Really????? While he hasnt hurt us legislatively, he has cornholed us SEVERAL times through his appointment of a radical, Democrat, RABID Anti-gun Attorney General in Paula Dow. Within a couple of Months of her Appointment, We here in NJ were no longer allowed to have firearms Delivered to us from the CMP, She made the Completely abritrary decision conserning the Auto-Ordnance Carbines (thereby putting ALL of us who own any type of AR or AK-pattern Rifle into danger) because of it's Shape..even though it COMPLETELY conformed to the standards to make it "Not Substantively Identical to a Named Firearm" under the AWB, and she barred a Brand New US-Built AK-Pattern rifle from sale here based SOLELY on it's Advertising. Also Christie Himself had the opportunity with Brian Aitken to send a Message, and while he did Commute Brian's Sentence, Aitken is STILL a Convicted Felon and stripped of his 2A rights forever. Christie is NO FRIEND TO US.
  8. The legislature assured the Hunters and FUDDS that their Muzzle-loaders would be safe, but when it came time to present the bill, they put the original wording that pretty much banned ANYTHING .50 and above including MuzzleLoading rifles and Smoothbores.. it garnered anouth ourtage amongst the hunters and other shooters to acrually get together and DO something. if they go for it again, and limit it to .50 BMG, and other Cartidges, it will probably pass this time.
  9. I dont have a Case feeder
  10. Tehcnically it would, SHOULD be Lawful the way the statute is written, since you are acquiring the Receiver in a lawful manner..That said, if you should ever get jammed up, even for anything minor, having an AR with no Manufacturer Info, or Serial Number WILL cost you way more hassle than the $100.00 or so to just buy a finished lower in My Opinion. Now, that said, if you want to Stamp it, and Serial It when you build it, while not a Requirement under ATF rules, it would probably make things look better here at Home.
  11. Just measured it, 25 inches above the mounting surface
  12. In this particular case, the State Attorney General
  13. KpdPipes replied to siderman's topic in Gunsmithing
    because as time goes by, better things are developed.
  14. I stitched to EWL after talking to a buddy who's a manufacturer, he reccomends it for his rifles after he did a few tests of different lubes out there in different conditions. i have to admit though that Froglube is starting to look interesting as well. I'll probably pick up a kit and give it a shot on one or two rifles and see how it works.
  15. This is what I use as well
  16. Crap, I wish I'd seen that a month ago, I just got in a couple of thousand new plated bullets from TBW dammit. Oh well, now I know for next time.
  17. First batch I ran through my LNL fed ok with no issues, but I was surprised at how far out they were when i checked them once I had the gauge, ended up running 550 rounds back through the Crimp die once i got it right, and checked every one
  18. One gauge on top of the bench is easier than having 4 bbls floating around.....I even bought the Moon Clip Check cylinder as well just to be on the safe side.
  19. Bullet works has 9mm for $160/4K and .45 $200 /2.5K they've gone up a little I think I paid around $160 for 2500 .45 from them last year TopBrass has 9mm for $80/2500, and .45 for $80/1K If you google search "Once Fired brass" there are a number of places that come up. careful of shipping costs, if they're shipping using anything other than Flat Rate, you're getting hosed.
  20. Just found that our the hard way
  21. Everyone has pretty much covered everything you need..one addition that's not 1005 Necessary, but can help is an EGW Case-Checker gauge It's a little steel dingus that has chambers bored out for .45 .40. .38Sup and 9mm every few rounds, drop a finished one into the gauge, and make sure nothing has backed out or loosened up. I've run a couple of thousand .45 through my L-N-L so far, and i cant be happier with it.
  22. So...The Media and reporters are completely Incompetant, and little better than Drooling Imbeciles on EVERY SINGLE SUBJECT...unless it's a story that is critical of Police..THEN of course that same Intrepid Reporter (Who is a total nincompoop on EVERY other subject) is suddenly imbued with the writ of God himself.
  23. Wideners has Wolf Small Rifle Magnum (Equivalent of CCT #41 Military) primers on sale for $16/K
  24. I think it was 48" i'd have to dig out the invoive to eb sure. I followed their measuring instructions Double-cobra black and OD with HK hook hardware
  25. I have a Sandstorm single-point. Well made, and well worth the price.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.