bbk

Shane, Shane, Shane... I don't know what to say :shock: , that's simply too nice, ha

Yea, vertical grips are fine. I've taken mine off though, as it adds no real value :shifty:

Nice, Chris. I bought my Mini's a couple years back before the whole LED thing took off. So, even better alternative. And yea, rice, cooking oil, and canned fish (or something similar) is all a person/family needs, albeit boring, ha... but just add some salt, tabasco, etc, and it'll be good to go.

Speaking of lights and cheap, I recommend Mini Maglites (AAA or AA version). They're cheap (less then $20), and have the "candle" mode (the LED version does not as far as I know). Its pretty bright, and I have at least a handful of these around the house and two in my vehicle (with snap lights to complement). I usually see them around in most hardware stores. (For reference: http://www.maglite.com/product.asp?psc=2AACELL&pt=R )

Pics? +1 :pray: . Ha, please! I need to take the time to realize I'll never have nice toys in comparison

The projected path from the varying sources seem to keep edging towards the coastline, ugh. All I want is a quiet labor day weekend.

I won't lie, I won't reveal my modest preparations (OPSEC). However, I'll discuss. I've had the unique opportunity within the unique opportunity to see how things work behind the wizard of Oz's curtain. And, like SpecialK said, if anything, I've learned that nothing is impossible in the realm of misfortune. I don't think there really is such a thing as preparation in moderation personally. The application of preparation (actually buying material goods, etc) is never ending, and is really just a matter of how much is needed for what type of scenario. In most cases, having as much as possible is a decent idea-- as in most cases, the initial best option is to "bug in," or stay in a familiar, secure location (aka home). The general time frame for Federal assistance is at least 72 hours-- if not longer depending on the region (depending on the severity of the crisis, Newark or Jersey City would probably get assistance before a town of a few hundred in the middle of the Pineys). So, having as much on hand to survive would probably be for the best (note there's never "too much" on hand). But there are perishables that, well, perish quickly regardless-- water being the big one. Unless a person has their own personal well (preferably ground), most people dependent on the city lines will run out within approx. 24 hours (if not less depending on the amount of water used by the community). The first thing during a crisis, regardless of the [un]known extent of damages is to hoard what YOU can; by filling up every known receptacle... cups, tupperware, tubs, etc. As for stocking up on ammunition in a crisis situation, ha, that's a whole topic of discussion in itself. I won't stir that hive yet. And yea, I'd be interested to see what Mr. Wojo has to say about this-- sure he has far more knowledge then most of us.

The separate DVD volume: http://store.magpul.com/product/DYN002/76 Its targeted towards guys who use their primary and secondary day-in-day-out. I know the second DVD for volume 1 does highlight more advanced concepts-- but volume 2 itself is solely dedicated to operators... hence, not much use for civilians like us.

Yea, I liked ZRT too... but I guess I'll throw in some ideas: NJZWG - NJ Zombie Warfare Group NJZEEF - NJ Zombie Eradication Expeditionary Force TF4024 - 1940-2-4: George Romero's bday in int'l format-- a homage

Its the Mod4, and I too wish I went with the bigger Mod3. I was worried about the latches snagging on things, but doesn't seem like that's an issue at all. I'll update some of these pictures later when I get out of work. Sitting on this other computer makes me realize how dark some of the pictures are-- I'll remedy that so it makes it a bit easier to see what I'm talking about. ETA: Krd- I have watched the Magpul Dynamics DVDs (ha, I still have to mail some back to Caine ). Travis was a big reason why I opted to try out the Redi-Mag (he uses the Redi-Mod, just an altered version of the Redi-Mag... and about $70-100 more expensive). Its a decent instructional video, the first volume being a really good start for beginners to the platform. I found the second volume to be a huge jump from the first in terms of skills and audience. There is some good stuff though in v.2, but it seems like maybe 1% of the population would actually have need to watch that DVD (aside from gun pr0n ).

Ahaha, yea, is that from the article that explains the crazy antics of African "freedom fighters"? The article where it shows guys with AK magazines with the bottom blown out, and bad 1980's wind breakers? I read it once, and have been looking for it since.

*Disclaimer: Rifle is NJ complaint, magazines are NJ compliant (15/20 PMags) Ha, ok, took some pictures from my phone. Not the best quality, but I can use them to supplement my thoughts. I started using the Redi-Mag w/ BAD lever roughly six months ago. Since, I've put around a thousand rounds through my rifle, and done countless magazine changes (and only one malfunction :evil: ). I'm confident to say that I'm still utilizing both on my rifle, which functions as my HD/go-to firearm. I initially thought the weight was going to be an issue, as I was going for a lighter setup to began with. I swapped out an EOTech and DMS-1 for an Aimpoint H-1, and also got rid of extra peripherals on the rails (don't run any type of VFG or covers (aside from rail ladders), just a light+mount). So, why add the extra few ounces with the Redi-Mag, and another half pound because of the magazine+ammo? Quick shot w/ two magazines in: Since this is my primary, I understand that if I were in a crisis situation, I'd rather not take my chances with only one available magazine. Considering the overwhelming majority of malfunctions are directly caused because of magazine issues, the fact that I have a fresh primary magazine available in a highly accessible position is a huge plus. Instead of trying to stuff my pockets (which, if its a knock at night, my skeevies probably don't have pockets to began with), or, worse, hold an extra in my reaction hand-- the extra weight sits on my reaction side (left-hand side). In the picture, you'll notice that it is definitely apparent (in space and weight), but manages to stay low profile enough where it doesn't catch on things, etc. Demonstrated here: Even if I were in a free state where I could utilize 30-round magazines, I would still probably run the Redi-Mag for the exact reason stated above. I did notice that when the magazines sit in the Redi-Mag, the magazine does not sit dress-right-dress with the magazine in the rifle: (magazine in rifle on left, Redi-Mag on right) This is favorable as it helps with differentiating magazines on reloads. This is a factor with really combat reloads only, but it does help with admin reloads as well. The "back side" of the Redi-Mag is just a flat space: As you can see, it does cover up the SW15 logo. You can also see that mine is not the quick attach version, as there is a huge lump in the front (also in the picture). I don't mind the lump-- as its only somewhat of a pain when I unhinge the rifle to take out the BCG/CH. Instead of a ~90 degree angle, it is closer to 50 or so. Still plenty of angle to take out/put in the BCG/CH comfortably. Even with the Redi-Mag on place, the serial number can still be seen (for those who this matters too). In the following picture, there is an empty space that isn't well defined because of my crappy camera, but this is where the serial number can be seen through: Again though, it takes practice. It took me a lot of practice reloads to just grab the right magazine, and, slowly, place it in the magazine weld. The lever on the Redi-Mag is solid, with no issues. The only thing that bugs me a bit is sometimes the Redi-Mag will rattle faintly when there is a magazine inserted. This has no effect on the magazine though, and stays firmly latched. --- The BAD lever most people are familiar with already. It didn't take me long to get accustomed. Because of the Redi-Mag, things can get a bit cluttered, but is more then manageable. This can be seen in this picture where the bolt catch/BAD lever is attached, alongside the Redi-Mag lever: I could imagine with winter gloves, it might get a bit cluttered. I cut the tips off my gloves, so I haven't been able to test what its like. I am going to be investing in some Mechanix down the road, and I might add once I get that experience. Regardless, the BAD lever (with preferably a charging handle w/ latch, for one handed manipulation) is a smart buy for any AR owner. Happy, RayRay?!

Ha, factor in the worth of the men involved (training, logistics, etc), and that Somali holding the AK is still worth $10; the SEAL and his weapon, probably close to $800K+

Hello and welcome. I have some family in Voorhees, somewhat familiar with the area.

Its a good read. The original writer wrote a follow up: http://www.zerohedge.com/article/guest- ... -will-look

This has definitely been some good info. I've chosen to be the silent audience so I could get as much unfettered info as possible-- good stuff, thank you all. I have to admit though, I almost feel more overwhelmed! I can respect people who want the luxury (that word is of course used as a stretch as applied to AKs) of certain brands. Truth is, in my application, I'm looking for a pure beater. Aesthetics is something I really don't care for at all (even with my other firearms). Just keep plugging away (and I'll probably ask more questions down the road), thanks for the info again.

Jeez, haha, what a character (the officer). I agree that the escalation of force wasn't justified, and he should face the appropriate and equal consequences. What those appropriate and equal consequences are is for investigators-- but seeing how this wasn't a unique situation, I wouldn't want him in a uniform anymore. He doesn't represent being a professional in uniform-- I doubt he's any better in person. As for the kid, let him learn his own way. Those cut out for the world will make it past the filters, those who aren't will become some type of statistic (drop out, druggie, dead, etc). Fortunately, it seems most people get it out of their system though, eventually.

Seriously been trying to upload pictures for the past half hour. Apparently the only camera in the house has software that is incompatible with my computer. I'd rather not take any iPhone pics (I don't have the 4, no flash), as the lighting would be horrid-- I'll try that tomorrow though when I do have some natural lighting. Sorry Ray

I know, ha (I started on page 1 too), I was just inquiring if we had come to a consensus is all. It'd be kind of difficult for any designer to make something without a name or theme in place.

Is there an official name and/or theme? (Aside from zombies... :doh: ) Or are we just depending on inspiration

Hey, welcome. I must admit, I find that field of work pretty fascinating.

The general AK vs AR thread got me thinking. Maybe I don't hold much respect for AKs because I don't personally own one (though I do have hands-on experience). Regardless, my interest is piqued, and I figure its worth getting schooled at least to figure out if its worth an actual investment of money. I have done searches on this forum, and generally, but between NJ laws and 922r compliance, it makes my head spin. So, what are examples of NJ legal AKs? From what I've gathered, it cannot be marked with "AK 47" or something. Also, from what I understand, Saigas cannot accept any "hi cap" magazines (anything beyond their stock 10 rounders) without first being 922r compliant. What are the brands to take note of, good and bad? I've heard repeatedly Arsenal and Saigas are the way to go. Century is hit or miss. RPK-based AKs are solid, but I am not sure which brands use this (VEPR only?) As for "what I'm looking for," I think it'd be pretty obvious. A normal, conscript ( ), configuration is fine-- obviously not trying to make this a bench rest gun. And preferably chambered for 7.62x39. Regarding price. I understand that higher quality will cost more obviously. I'll be honest, I'm looking for "best bang for the buck." I won't buy the cheapest AK just because its cheap-- but I don't want to pour too much (because at that point I'd be looking at different systems all together). I don't want to note a price though, and rather leave that open to debate. I'd prefer to stick to the topic of AK variants strictly in the thread-- no need to make this another pissing match between different types of firearms

Pizza Bob is right, the SIG 516 is a piston AR w/ 3 or 4 gas position regulator. (Personally I think its a waste of Sig's time to get invested into the AR world when they could instead focus on the 556 series...)

ACR/SCAR/XCR are not the next iteration of AR15 variants. The last iteration was probably KAC's SR15/16/25-- Stoner's last designs. The ACR, etc, are next gen systems vying for the nex contracts (with the SCAR most likely getting the contract). Also, what operational or any real world (to include training) experience do you have with either system (AR or AK)? Also, as stated, the AK was created for a conscript force, while Stoner's design was for a more finely tuned force that quickly realized applied BRM/ARM was more of a force multiplier then sheer numbers.