Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Malsua

Members
  • Joined

  • Last visited

Everything posted by Malsua

  1. How about this one http://thehill.com/blogs/ballot-box/dem-primaries/257172-hillary-australia-style-gun-control-worth-looking-at "Hillary: Australia-style gun control ‘worth looking at’ You know...that involuntary "buy back" i.e. confiscation.
  2. >>how do you make change from a 1-oz coin to buy a loaf of bread? The same way you always did. You go to the money changer. Despite the rhetoric "You can't eat your gold" there will always be someone willing to take precious metals and there will always be someone willing to make change for you for a fee. If we are at a point where none of these things exist, there isn't going to be a baker willing to sell you bread for any reason but even in the warlord regions of Africa where there is no functioning government and hasn't been since the British left, you can still buy and sell things. As a side note, PMs are a place to park money. They aren't a good investment in which you intend to make money, specially if you buy at the peaks. Converting your 401k/IRA/Whatever into PM funds or ETFs or whatever, isn't what I would do with my money. Unless you can stand over it and defend it with a rifle, you don't own it. Once you have physical, it isn't an investment, it's a hedge against inflation or government currency manipulation.
  3. I've been pulled over probably a dozen times, 10 of which were 20+ years ago. Any time I was pulled over after dark, I was asked "Where are you coming from?". It's DUI Fishing. Of course, that was all in Ohio. The two times I was pulled over in NJ, I was let go with a lecture, but once was at 6am on the way to work and the other at 4 in the afternoon.
  4. This. They made the stairs for my addition but I provided specialty Maple treads from an Amish mill I used to work with when I was in the lumber business. They will make the entire thing to your spec and have it delivered. Great work.
  5. Yes. G1Ws off of Ebay, unless a reputable vendor are probably knock-offs.
  6. I still think the G1W is the best bang for the buck going. As long as you get a real one and not a knockoff.
  7. The top two dash cams are the Street Guardian SG9965GC http://www.amazon.com/Street-Guardian-SG9665GC-Supercapacitor-DashCam/dp/B00U0OJMYG And the DOD LS460W http://www.amazon.com/DOD-TECH-LS460W-Powered-Technology/dp/B00MTW25IM/ref=sr_1_1?ie=UTF8&qid=1455035149&sr=8-1&keywords=dod+ls460w There are more expensive ones and there are ones that do parking a bit better. The DOD cams have slightly better night video than the Street Guardian but the Street Guardian has more features. I still run a DOD 330W because I don't want GPS.
  8. I agree. The issue I see with "filling to the high spot" is that at some point, the flooring runs to another floor section and they're probably not going to match. You'll either have a permanent toe stub or need to sand the crap out of the last 4 feet or so to get them to mate level. It sounds like a pain, but pulling out the old tongue and groove and installing new plywood really is the right answer. I re-floored most of my house recently and struggled with the old tongue and groove. Once I decided to cut out all the problem sections, it was like a voice from above said "And the TRUTH shall set you free!". After that it was really just a basic carpentry job of getting it level rather than sanding here, shimming there, on and on. I even replaced two floor joists that were under the old bathroom and needed to go. That would have almost impossible while the tongue and groove was down. Once it was out, the light bulb came on and two new joists went in. The best part was the the old house and new addition now perfectly match and are solid as a rock.
  9. I know some people have decent luck with them and my cousin still runs one. He's always posting the latest part that broke. A starter and a universal yoke on the rear drive shaft were the latest bits. I've never replaced a steering rack in any vehicle. Oh, well ok, that's not entirely true. I had to replace a steering box in my 1968 Mustang after 280,000 miles. The only vehicle I've owned that needed the rear diff rebuilt(tooth missing on ring gear)? Jeep. The only vehicle that seemed to eat ball joints? Jeep. Starters, alternators, bushings, fuel pump, on and on. I also carried a spare distributor cap cuz mine ate them every 10-15k miles. Driving along and deader than a doornail, just like that. My step dad had similar issues...Shrug. As an off road vehicle it was great. It's reliability was horrible.
  10. What type of cutting are you doing? Are you looking for edge retention or toughness? I've had a buck 307 Stockman for probably 35 years that I wouldn't hesitate to use a hammer on to pound through something but if I drag it across my hand, I'm not going to bleed. By the same token, my Spyderco Para Military that I bought myself for Christmas will cut to the bone if you do the same thing. If I were to pound on my Paramilitary blade, I'm not sure what it would do, but I suspect I'd be in the market for a new blade. It really holds an edge but it seem a little brittle. My Spyderco Tenacious doesn't hold an edge as well, as I've rolled the edge in places before, but I've beat the crap out of it and it still pretty durable. I use my knives mostly for cutting boxes open and nylon straps on pallets. Also the occasional wire stripping or tubing cutting. The Para Military has had fantastic edge retention so far but I did break off about a half grain of sand sized bit off the tip. Now touching the tip to your skin doesn't cause bleeding, heh, so that's a blessing I suppose.
  11. You would probably be better served to just cut all that out and put down some 3/4 plywood and then put your 1/2" or whatever underlayment needs to be there to bring it even with the rest. You can plane and massage whatever is underneath to get it level. Looking at that makes me think there's a joist sitting under the middle and you have cross members that run to either side that have sagged. A picture from underneath would be helpful. I also have an 80 year old house and remodeled a few years ago and dealt with this exact issue.
  12. Is it a high spot seam or just a crowning of the hallway? It also depends on how much. If it's not too much, rent a floor sander and knock it down. If you have a high seam, you can use a DADO blade, or possible just a router and cut down the plywood in that spot. It may also be possible to jack up either side and install house jack stands. I've not done that much flooring and only found leveler to be good for smaller areas. I suppose a pro could do an entire floor with it, but how do you manage connecting areas? In areas where it was just a very slight difference I've used an extra layer of rosin paper.
  13. Very interesting! Well, I caught the Death Wobble on my Dash Cam. I will have to update the title of the video.
  14. I have a light duty plow on my Ram 2500 pretty much just to push end of driveway snow plow leavings. One or two swipes and it's gone. It used to take me hours with a shovel. I have a snowblower as well and you still have to take it real slow when you're dealing with a 3 foot high, 10 foot wide plow pile. The truck saves me a ton of time. There is a local guy who has an old CJ-5 that he has a plow on. I see him do little jobs with it and it appears to do fine. Not sure how many times he's trashed the ball joints, tie rods, ring gear, universal or axle(all just some of the stuff that went on my or one of my family's Jeeps).
  15. I saw it better than it was recorded here...both tires were fine. Yes, I know it can happen to any number of vehicles...it seems to happen to Jeeps more.
  16. It was never an engine problem...it was always something weird. Just random crap, randomly failing. The engines, to their credit always ran. Everything else was always in question.
  17. The entire front end was wobbling back and forth like it was completely loose.
  18. Sorry, posted in the wrong forum
  19. Saw this one the way home tonight. My entire family has a long history with these junk machines. I've spent many many hours in and working on the junkers. This is just par for the course...tooling along at a reasonable speed and something breaks.
  20. Malsua replied to 1LtCAP's topic in General Discussion
    Ah, measurement error. Cool, at least you found it.
  21. Malsua replied to 1LtCAP's topic in General Discussion
    Just out of curiosity, I'd pull the wires on #1 and make sure the scanner is correctly identifying the misfiring cylinder since you seem to have eliminated everything on 5. You would think it'd throw a P0305 DTC but I am not familiar with Volvos ecms. It doesn't appear to be the injector seals since you swapped and it stays at Cyl 5, but did you try shooting some carb cleaner or ether near the injector while it's running to see if idle changes?
  22. Malsua replied to 1LtCAP's topic in General Discussion
    I had a similar problem once. The cam lobe on the intake was ground perfectly round. Apparently some debris or something had caught in that oil journal and no oil wound up on that lifter. No lube, ground cam, no gas, no fire. I would also look at the wiring on the coil pack, it's possible the spades inside the connector plug are corroded or that it's broken somewhere else.
  23. To echo the others, it sounds like alternator bearing to me although it does have a power steeringish sound about it as well.
  24. So her or she would be 20 right now. That makes me feel old since I was 28 that day. heh.
  25. Ever since I bought my plow, the best the plow guy can do is about 4 footers and this storm was only about 2 footers...I really want some solid 6 footers just to see what happens. I also have been eyeballing one of those Platinum Ariens. I need a 24" bucket just to fit down my paths and my current 24" Ariens is the smallest engine. It really does pretty good(throws up to 50 feet) but these big snows can bog it if I don't stop. The big engine will chew through it and laugh. Of course who wants to spend $1500 for something you use a handful of times per year.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.