Everything posted by njJoniGuy
-
Bought my first lower ... whats next?
Get a Geissele trigger. All else is crap in varying degrees.
- Upcoming 600yd Prone Match
-
Upcoming 600yd Prone Match
Given that we shoot at known distances, on stationary targets, mil-dot knowledge is unnecessary and will scramble your brain during high power (non-sniper training) matches. The match shooters' iron sights are set to known (to the shooter) click values of either 1/4 moa or 1/2 moa per click in a known direction. Once you have a no-wind zero (for a specific target distance) a shooter may move his sights to account for wind and/or mirage conditions. Knowing when and how far to click during a match is a learned skill, one I am only now beginning to learn in my 7th year of high power shooting. Don't let the minutia scare anyone off. Get your rifle set to a no-wind zero at a short (100-300 yd) range and add the proper elevation to get you on the paper at 600. You can (and probably will) make minor adjustments during the course of fire as you get feedback from the pits on where your shots are hitting. It's important that you get your shots on the six-foot square target within a few shots of starting.
-
Upcoming 600yd Prone Match
Just to let you guys know, you don't HAVE to shoot this 600yd match with a scope on your rifle and a bipod or bag up front. About half of us will be shooting with iron sights (either rear apertures and front posts or front and rear apertures) and slings. And for those with scopes, most are either 1/8 moa or 1/4 moa per click
-
Upcoming 600yd Prone Match
Understanding Minutes of Angle: http://www.m4carbine.net/showthread.php?t=90809 Post #1 in this thread gives a pretty good explanation I won't copy and paste it here, but follow the link and check it out The short story is: 1 MOA = 1/60th of 1 Degree Just like there are 60 Minutes in an Hour, there are 60 Minutes in a Degree. The Minute of Angle unit is useful to shooters because the math works out (after a negligible rounding down) that our target shot group sizes, when measured in inches, can be easily converted into MOA. That is because: 1 MOA = 1” PER 100 Yards With rifle shooting at distance, such as this 600yd match, the shooter will need to adjust his sights so that he can aim precisely at the bullseye on the target (in the 600yd case, the bull is 36" diameter) and if everything is done right (and conditions co-operate!) the shot should land precisely at the point of aim. You can adjust for the bullet drop at distance by raising your rear sight, or lowering your front sight, or some of both. But you do need to establish a baseline zero (usually 100yds) and know the adjustment rate of your sights (AR rear sights come in 1/2 moa and 1/4 moa per click flavors) AR front sight posts are approximately 5moa per full revolution
-
Spotter scope?
During the 300yd Frozen Nutz matches at SJSC, I can usually see my .223 hits with my 20-60x80 Barska scope Bought it from Midway for about $225 The little tripod is a p.o.s. so you'll need an appropriate scope stand to meet your needs.
- Upcoming 600yd Prone Match
-
Overheard at Ramsey's
Sue them for discrimination, as you are a member of "The Blessed Few"
-
Overheard at Ramsey's
.380acp definitely (imho) qualifies as "Handgun ammunition" as defined below. The sale prohibition may be Dick's store policy, but it's also the law, effective April 1, 2008 http://www.njleg.state.nj.us/2006/Bills/PL07/318_.PDF
- Spray Case Lube
- Upcoming 600yd Prone Match
-
Upcoming 600yd Prone Match
Given that you're coming in without an NRA classification, you'll be competing as an Unclassified Master. Chances of scoring in the money are pretty slim, so use as many of your first 22 shots as sighters so you can get serious during the second and third matches. (Each match is 2 sighters followed by 20 record shots) With .223, the comeup from 300 to 600 is about 11 m.o.a.
-
Upcoming 600yd Prone Match
The black center of the 600yd target is 36" dia. It appears the same as the 6" bull at 100yd, the 12" bull at 200yd and the 18" bull at 300yd. Fear not - the next date after this match is Saturday October 5th Then we shift gears and shoot the "Frozen Nutz" matches (300yd prone) at SJSC, most likely November thru March, always the 3rd Sunday of the month. Watch for details as we get closer.
- Upcoming 600yd Prone Match
-
Upcoming 600yd Prone Match
At Cumberland, there's people in the pits pulling your targets and marking your shots. A 45X spotting scope is plenty to see the 3" spotting disc on the face of the target. And you can usually see the scoring disc with the naked eye. Remember, competitors do more than just shoot. You'll be squadded with 2 other shooters. Two on the line (1 shooting, 1 scoring) and one in the pits (pulling and marking) Bring a lawn-type chair or stool for your scoring duties And you need to keep hydrated, so bring water or Gatorade or the like. Registration starts at 8, first shot at 9, usually all done by 2
-
How well should you know someone before giving them a reference
The only people I've been a reference for, or used as a reference, are people I've been to the range with. One Cherry Hill friend (a new gun owner, by inheritance) used me as a reference and I wouldn't complete her form until I had guested her at the range and was sure she wasn't going to go looney just because of that evil piece of hardware! As an NRA Certified Instructor, I hold myself to a slightly higher standard when asked to evaluate others when it comes to firearms. A bad day at the range can turn into a really bad day if everyone is not very careful.
-
Upcoming 600yd Prone Match
For 600yds I run my 1/8 twist 24" barrel .223 Stag with a Sierra 80gr HPBT Match King (#9390) over 24.0gr Hodgdon Varget and CCI small rifle primer at about 2.540" COAL It's all single shot load, so they're way longer than will fit in a mag. You just don't want to jam them into the rifling.
- Upcoming 600yd Prone Match
-
Upcoming 600yd Prone Match
.243 bucks the wind better than .223 in general The heavier bullets (95 and 107gr HPBT) help a lot Part of the trick at 600yds is reading the conditions (esp the wind) and adjusting accordingly For 600yds I use 80gr Sierra Match Kings, which do much better than the lighter 69gr MKs I run at 200 and 300yds For 100yd matches I go the less expensive route and use Nosler 52gr match HPBT Using Varget and CCI Small Rifle primers, my loads are the same, summer and winter. First time I was at Cumberland back in 2009, I looked downrange from the 600yd line and all I could think was "holy crap - that's a looooong way down!!" It's really a ton of fun shooting that distance, and who knows, it may come in very handy one day real soon.
- Upcoming 600yd Prone Match
-
Upcoming 600yd Prone Match
Saturday September 7, 2013 Cumberland Riflemen Millville, NJ Open to all Details at: http://www.cumberlandmatches.com/mrfclass.html Contact me for more info These matches are a helluva lot of fun You can shoot slung up or with a bipod You can shoot iron sights or scoped Prone position from the concrete pad on the covered firing line Butt of rifle must be in your shoulder
-
Stand off in Woodbury
Could be! After all, this is Sweeney's district Parking (and just being) on the Right is a capital offense.
-
Stand off in Woodbury
Grove Rd & Kings Hwy is actually West Deptford Twp. Just down the road from my office. Haven't heard sirens or helos since I got here shortly after 10
-
Banger’s Sport Shop @ Winslow, NJ
Chuck's brother Jake had some not very nice things to say about the customer in this transaction at his shop this afternoon. I was at the range and went into Banger's to give someone a heads-up about this thread and Chuck wasn't there but Jake was. He said the customer was told SIX weeks, he referred to the customer by an unrepeatable term here, and he said he wasn't going to be taking in anymore gunsmith work. Not exactly the kind of customer service another potential customer should ever hear.
-
Banger’s Sport Shop @ Winslow, NJ
Always been like that at Ed's Butch carries on the one-man-show tradition of his late dad. And does top notch work, at his own speed. Like the sign at the printers says: "Low Price. High Quality. Speedy Service. Pick Two"