Everything posted by Pizza Bob
-
Sig Sauer ACP
Ray Ray, that's the problem - one can't speak to the legalities because it falls into a gray area. The only thing that can be said is that the ACP, in and of itself, is that it is 100% legal to purchase and own. The ambiguities come into play when a handgun is installed in same. I would say that if you are below the maximum weight, you are probably GTG - of course, this being NJ, it may take a session in court to prove this to the arresting officer and the prosecutor. Caveat emptor. Adios, Pizza Bob
-
Sig Sauer ACP
Yeah, I looked after reading your post. It was the standard model that was listed at 25 oz previously. Of course that was before I brought up the issue we're discussing here with the National Sales Manager (Commercial side) of Sig. Not unusual for them to play fast and loose with published weights, or, they guessed previously and then scaled it after they became aware of the NJ issue, which is why I'd like Chris to scale one. Really doesn't matter because the issue won't be resolved until there is case law. Adios, Pizza Bob
-
Sig Sauer ACP
When this first became available, Sig had it on their site at 25 oz. Would really like to scale one....Chris?
-
A heads up on the M&P Shield - MA Compliant (10lb) trigger issue
I'll correct myself - after a little further research, it appears that a 10# pull is one of the requirements, that and a loaded chamber indicator and an external safety of some kind. I wasn't able to find anything about a magazine disconnect safety either as required or not required. Never thought I'd find gun laws more complicated and tedious than NJ's, but I think MA has just become the leader of the nanny states with regard to gun laws. Adios, Pizza Bob
-
Sig Sauer ACP
I understand that, but if Federal law considers the assembly a firearm, wouldn't NJ also? And in the absence of a definitive answer, wouldn't the state look to an entity like the BATFE for a definition? I'm just playing devil's advocate here. It really makes no difference to me sice I have no desire to own one of these. I think it's a little more than an "accessory" that attaches to a handgun, though, as it alters the physical properties and handling characteristics - more like vice versa. When does it cease being an "accessory" and become a modification - one that renders the parent firearm illegal? Chris (@ Bullseye) told me that he had spoken to the NJSP and they were OK with it - if I were purchasing one, I'd want that on their letterhead, which we all know isn't going to happen. Adios, Pizza Bob
-
Sig Sauer ACP
Thus we are back to the original conjecture. If it just an accessory, and not a firearm, per se, with your handgun installed, then shouldn't you be able to add the forward grip? If the ACP, with a firearm added is not restricted by NJ's "evil feature" law, then why shouldn't you be able to add a vertical foregrip to the "accessory"? Adios, PIzza Bob
-
A heads up on the M&P Shield - MA Compliant (10lb) trigger issue
AFAIK, there is no trigger pull requirement in MA law. It may be possible that the heavier trigger pull is the result of some added component that was used to bring the gun into compliance. I believe that MA requires a magazine disconnect safety (and it may be these components that are suspect) and also a loaded chamber indicator, which could also be a contributor dependent on how they accomplish this. Most manufacturers just provide a hole in the chamber hood for visualinspection, but some guns use linkages to some kind of visual & tactile indicator. Really don't know if that is what is going on, but a minimum trigger pull is not part of MA law. Adios, PIzza Bob
-
Does it matter if the BCG is for a full auto?
What is this BS??? The OP asks a legitimate question. He gets a definitive answer, including a letter from the ATF and then you feel it necessary to jump in and obfuscate the issue with non-relevant BS. To use terms you're familiar with: Asked and answered, your contribution is not relevant. Adios, Pizza Bob
-
Anyone have feedback on the "Stealth Defense Strut Holster"?
Looks like a solution looking for a problem. Another holster that is destined for the "holster drawer". Why would you want something this large and cumbersome to conceal a J-frame? Plus you lose what little advantage this system might offer (the ability to carry a spare mag), since you are dealing with a revolver. I suppose you could carry a speed strip with extra rounds if that pocket would accommodate it. Also I can't imagine that would be comfortable strapped above your waist - and dependent on your body type, whether it would constantly be slipping down, or gouging the top of your stomach. J-frames are easy to conceal by conventional means. I had a job that preferred me to be armed, but the attire of the day was polo shirts and khakis pretty much. Didn't afford much in the way of concealment. My gun of choice was a S&W 638 carried in a Galco ankle glove with the calf strap. Invisible, not too hard to access, and very easy access in the car or when seated. I also have an Andrews IWB holster. It uses a single belt loop, off the gun, for a nice slim package. Gimmick holsters usually don't stand the test of time - go for a tried & true method of carry. Get a quality holster from an established maker and you'll be happier in the long run. JMHO Adios, Pizza Bob
-
Legislative Heads Up Folks......
Truly an outstanding letter. Impressive use of the language and one that engenders new respect for our system of public schools and our youth. However, I have a feeling that the response you receive will be something akin to "Send this guy the bug letter" - a punchline to a joke that can be traced back to the 20's. You get an A+ for effort (pardon my cynicism). Adios, Pizza Bob
-
Sig Sauer ACP
That may be a viable defense, but I wouldn't want to gamble my freedom on it.
-
Greetings from Ewing
Yeah, welcome from Hopewell Twp. I'm a bit curious about that statement also. Care to clarify? Adios, Pizza Bob
-
Just because I'm curious, why are mini-14s so expensive?
The Mini-14's reputation for not being accurate is a carry over from its early days. There were a number of factors that caused the inaccuracy in the early rifles. Poorly machined surfaces within the gas block, tolerance stack resulting from multiple fixtures being used during the machining process and the fact that the front sight was pressed into the barrel - a method that could, quite literally, bend the barrel. Late 2006 / early 2007 saw a number of changes take place in the manufacturing process of the Mini-14. They changed the way the front sight was installed, they redesigned the machining process so that only one fixture was used for multiple operations and made other small improvements. The improved Mini-14 starts with the 580 series of rifles - those are the three digits that precede the serial number. All that being said, nobody is going to mistake the Mini-14 for a precision rifle, and yes, most AR platforms will perform markedly better than the Ruger. But don't sell the improvements short. They took what was a 5 - 6 MOA rifle and put it more in the range of 2 - 3 MOA and with ammo it really likes, the possibility of improving on that. Often times product's deserved repuations carry-over even after the problems that resulted in that reputation have been addressed and solved. Adios, Pizza Bob
-
Grandfathering in NJ
It is not a FID, it is a FPID - the "P" stands for purchaser. You are not required to have a FPID to possess or use a firearm in NJ.
-
Sig Sauer ACP
The civilian version does not have a butt stock. The ACP, in and of itself is perfectly legal in NJ - as was pointed out, it is nothing but a housing with some rails on it. The problem may occur when you install your handgun of choice in the ACP. The ACP is made of aluminum and weighs appx 25 oz. If you recall the "evil features" list for handguns, one is a maximum weight of 50 oz. While there are handguns that weigh 25 oz or less, there are a lot more that weigh in excess of 25 oz, meaning: Evil feature number 1. The ACP completely surrounds the barrel, allowing you to "hold the firearm with the non-trigger hand without being burned" to wit - a barrel shroud: Evil feature number two and you're outta here. A retailer could lawfully sell you the ACP because it is not a "firearm" until you install your handgun - at which time it may (more likely) or may not (less likely) become illegal. If I was a merchant, the last thing I'd want, in today's litigious society, would be to put my customer in a possible jackpot with the law. Adios, Pizza Bob PS: Actually, without a butt stock I think this thing is the most useless item to be pandered to the firearm community - but maybe that's just me.
-
Somerset Idpa October 21
New shooter briefing at 11:15 AM
-
Why not more polymer upper handguns?
The FiveseveN uses a steel slide encased in a polymer shell.
-
Pediatric Group Says ‘the Safest Home for Children is a Home Without Guns’
This is the AMA trying to build a case that firearms are a public health issue so that they can usurp congress' power and regulate them the way they do other public health risks. Beware. Adios, Pizza Bob
-
Are 228 and 229 mags the exact same?
The factory .40 S&W and .357 Sig mags for the P229 are 12 rounds. The 10-round factory mags were made for ban states.
- Legislative Heads Up Folks......
-
S&W 625 grips
GRIZ: The only Hogue revolver grips, that I know of, that cover the backstrap are those that are made for theX-frames and were furnished with the "Emergency Packs". They are available from S&W and will fit the K, L, N and X frame round butts. All other Hogues leave most (RB to SB conversion grips) or all of the backstrap exposed and do not lengthen the backstrap to trigger face dimension. Pachmayr Grippers cover the backstrap. Just bought a set of Hogue Big Butts for one of my 625's, but don't have the gun at hand, as it is currently having magic worked upon it Adios, Pizza Bob
-
1911 series 70
A lot of 1911's that eschew the series 80 or Swartz systems use titanium firing pins and stronger firing pin springs to accomplish drop safety.
-
Wedding/Reception Suggestions
Alec: When the fallout starts, I've got dibs on the 327
-
Has anyone had their BCG coated??
He just wants to make it like a POF
-
Sig Porn!!!
Besides .45 ACP they were available in 9mm .38 Super and, if memory serves, .30 Luger (very rare). I believe that Jared's 9mm P220 started life as something else and was converted to 9 mm by the importer, which is why it's stamped, "Assembled by..." I think they were .38 Supers originally, but not 100% sure. Jared can probably enlighten us. Adios, Pizza Bob