Everything posted by Pizza Bob
- SIG Certified Pre-Owned?
-
SIG Certified Pre-Owned?
My P229 was a CPO. CPO's are some of the best bargains out there. Dealers have a hard time getting them because Sig likes to dispose of them in large lots, so most go to the Big Box stores, like Bass Pro or Cabela's and they use them for special pomotions. They are gone through at the factory and anything that needs servicing/replacing is taken care of. They are generally police or other agency trade-ins - some of which may never have been issued - salesman's samples or guns replaced under warranty that have since been repaired. Usually if they are the plain-jane vanilla guns they are trade-ins. If they are fancy guns they may have come from the other two sources. One year warranty. Good way to get into Sig for far less money than a new one. A good friend bought a P226 in .40 S&W and bought a .357 Sig barrel, he loves it - it's his EDC (he lives in PA). Go for it. Adios, Pizza Bob
-
bring out the snubbies!
Now you're just bragging
-
bring out the snubbies!
Absolutely - You need that 3" barrel so that your ejector rod is long enough to fully eject .357 cases
-
bring out the snubbies!
Yeah, and we're both old farts, what does that tell ya?
-
bring out the snubbies!
Nothing special (no pun intended), just an original Charter Arms Bulldog Pug in .44 S&W Special. Before factory SD .44 Spl was available, my SD load was 6 grains of Unique behind an Alberts/Taurus 240 gr lead SWC - large and slow - kinda like me. Adios, Pizza Bob
-
Daily humor thread
- Anyone have a 9mm revolver?
Federal made it. It would be the equivalent to the .45 Auto Rim but in 9mm - that is, it is for use in 9mm revolvers that use moon clips (that would be the 940) for use without the clip. The rim would equate to the case head thickness plus the moon clip thickness. Charter arms made their Pitbull for this obsolete cartridge. If someone owned one, I understand that people have made the case from .38 S&W brass - but not very successfully. Probably be easier to have someone make moonclips to fit the CA. Adios, Pizza Bob- bring out the snubbies!
- Anyone have a 9mm revolver?
I suspect you are correct- Anyone have a 9mm revolver?
Enlighten me, I've never heard of 9mm S&W. The only S&W revolvers chambered for a 9mm cartridge ,that I am aware of are the 940 J-Frame, which uses full-moon clips. And the 547 which was a K-frame, fixed sight that used a spring type expanding extractor - which is responsible for the late intro of the Charter product, since S&W tied them up with patent infringement lawsuits. Both of those use the standard 9x19 (parabellum) round. It is possible there were others made for export, but they, also, would have been in the standard 9x19 round. There were N and L frame revolvers chambered in .38 super and some PC competition semi-autos in what was called .356 TSW (IIRC). Other than those I know of no 9mm S&W propietary cartridge, let alone a revolver chambered for same. Always willing to learn. Adios, Pizza Bob- Aftermarket mags for S&W MP Pro 9?
I don't speak M&P, but if it is the same as a regular full-size M&P mag, then Greg Cote sells NJ compliant 15 rd mags, here... http://gregcotellc.com/cart/index.php?main_page=product_info&cPath=108&products_id=1193 Hope that's what you were looking for. Adios, Pizza Bob- Application in, quick question...UPDATED 10/01/2012.
Yes, your PD is violating the law. Photocopy the form and send it to the NJ2AS. Adios, Pizza Bob- $18 Money Order to NJSP for P2P, WTF?
While the "requirement" is in the NJAC - it is NOT in any statute that I could find. Only that the applicant be thoroughly investigated. How a PD goes about that is recommended in the guide, but, again, that is not law, so how the actual investigation is done is at the CLEO's discretion - which is apparently why we have some PD's requiring the SP-212A and some that don't. Adios, Pizza Bob- Last Resort - WOW!
What's a DVR?- $18 Money Order to NJSP for P2P, WTF?
I was surprised to hear of a PD that did not require either fingerprinting or the completion of an SP-212A. I went searching through the statutes and came up with this under 2C:58-3e... The chief police officer or the superintendent shall obtain the fingerprints of the applicant and shall have them compared with any and all records of fingerprints in the municipality and county in which the applicant resides and also the records of the State Bureau of Identification and the Federal Bureau of Investigation, provided that an applicant for a handgun purchase permit who possesses a valid firearms purchaser identification card, or who has previously obtained a handgun purchase permit from the same licensing authority for which he was previously fingerprinted, and who provides other reasonably satisfactory proof of his identity, need not be fingerprinted again; however, the chief police officer or the superintendent shall proceed to investigate the application to determine whether or not the applicant has become subject to any of the disabilities set forth in this chapter. While it stipulates the applicant need not be fingerprinted again, it does not specifically direct that the SP-212A (non-criminal background check) form be used. Does not even specify that the investigating officer check with the NJSP SBI. Simply says that the applicant must be investigated to insure they have not become subject to any of the disqualifying aspects. If the CLEO is satisfied and willing to sign-off without the SP-212A, then you are GTG and no $18 charge. The use of the SP-212A is really a CYA move. In larger municipalities where the applicant may not actually be known to the CLEO it is circumspect to do it using the form. In small towns where everybody knows everybody and their business - not so much. The point is, the use of the SP212A is a means to an end (an investigation) but it is not required by statute. Adios, Pizza Bob- Flash Suppressor on semi-auto rifle: Legal or not? (I'm getting mixed answers)
- Last Resort - WOW!
The new show, Last Resort, debuted last night (9/27). I was blown away. I don't know if they'll be able to sustain the premise, but last nights premiere had me on the edge of my seat. No spoiler, but a brief synopsis: Nuclear sub gets a verifed order for a launch of nuclear missles against Pakistan. Captain and XO of the sub are about to launch when they realize it was odd that the order came through a secondary network that is only to be used if the primary network (Wash, DC) is destroyed - which it is not. The captain asks for verification over the primary network and gets no response. Next thing, they are attacked by one of their own. I'll leave it at that. Sure there are areas that stretch credulity, but it was really well done and I wish I could have fast forwarded through the commercials. As I said, I'm not sure if they will be able to sustain the level of drama exhibited in the premiere episode, but I'll sure be watching next week. Enjoy. Adios, Pizza Bob- Flash Suppressor on semi-auto rifle: Legal or not? (I'm getting mixed answers)
Just to bring this thread slightly back on topic - isn't the threaded barrel aspect a moot point? This is a Mini 14 we're talking about. I was under the impression that the flash hider on a Mini 14 was slipped over a plain barrel end and secured with set-screws - no threads. Adios, Pizza Bob<-----let's cooler heads prevail- Hollowpoint / OTM bullets can no longer be shipped to New Jersey?
@vladtepes - no, it is not. Are there handguns chambered for it - yes. But... 2C:58-3.3 "Handgun ammunition" defined; sale, purchase, etc., regulated; violation, fourth degree crime. <a name="{1BD1}"> 1. a. As used in this act, "handgun ammunition" means ammunition specifically designed to be used only in a handgun. "Handgun ammunition" shall not include blank ammunition, air gun pellets, flare gun ammunition, nail gun ammunition, paint ball ammunition, or any non-fixed ammunition. @comsec1 - OTM = Open Tip Match- Rings and Mounts for Rem 700
A full rail that bridges the loading port serves to stiffen the receiver/action.- $18 Money Order to NJSP for P2P, WTF?
See the attached - bottom of Page 5 under "Miscellaneous" NJSP Letter to Chiefs of Police 033010.pdf- Application in, quick question...UPDATED 10/01/2012.
The etc. is what worries me and where most PD's go extralegal- $18 Money Order to NJSP for P2P, WTF?
You don't HAVE to pay the $18. You can always pay Sagem Morpho $50 bucks a pop and get fingerprinted instead.- Hollowpoint / OTM bullets can no longer be shipped to New Jersey?
This is pure BS. How can the NJSP enforce NJ laws outside of NJ - answer: They can't. That however is a moot point since there is no law that says you cannot buy HP ammunition. Please take note, this is rifle ammunition so you don't even need a FPID. The vendor is blowing you off and doesn't want to take the heat. Send them an e-mail and tell them that if they don't want to do business with residents of NJ, just say so, and stop blowing smoke up your a$$. Adios, PIzza Bob - Anyone have a 9mm revolver?