Everything posted by Pizza Bob
-
Commifornia is really over stepping
Does "Duppie" stand for duplicate - just wonderin'
-
Wadcutters as SD round?
As I have said, twice now, a HB wadcutter loaded upside down is very effective
-
Any other 44M SA handguns?
Thank you. Do you need the name of my FFL so you can transfer the prize?
-
Do I need a revolver?
They're great for either. I do all of my loading/unloading of the moonclips at home, so there is no fuss or muss at the range, or competition. I made the following to fit in a compartment of my range bag... The trick is to buy enough moonclips that you don't need to keep unloading and reloading them, as you would with just a few. I carry 162 rounds with the above carrier, which gets me through local matches (I use it for IDPA) or a good range session. Also in the picture is the moon tool that lunker linked to earlier in this thread. I have two mandrels for mine, one for .40 S&W and one for .45 ACP. The extra mandrel stores on the tool as shown. Adios, Pizza Bob
-
Wadcutters as SD round?
My point was that, "...he heard in a course..." and my feeling was they were referring to what I said - hollowbase wadcutters loaded upside down (in effect, a huge hollowpoint). So from a legal standpoint, you're still in the soup. The better alternatives were mentioned, although those that posted forgot Federal EFMJ - which is now available in a variety of models with new names - but the concept is the same, a covered nose with a polymer plug underneath. The three mentioned in the letter to the NJSP as NOT being hollowpoints are: CorBon PowrBall / Hornady Critical Defense / Federal EFMJ Adios, Pizza Bob
-
.375 h&h magnum bullet pushed into case
Which brings us full circle, right back to post #1 in this thread
-
Wadcutters as SD round?
Actually the old trick was to load hollowbase wadcutters upside down, for defensive purposes.
-
Do I need a revolver?
It's hooks, crochet hooks. Maks' Anastasia will take you to task for that error - she's a pro.
-
Do I need a revolver?
The model 547 was made from 1980 to 1985. K-frame, 3" HB RB or 4" HB SB.
-
Do I need a revolver?
I have one of those also, with mandrels for .45 ACP and .40 S&W. They are great for loading the moonclip, but not so much for the unloading of the empties. Best tool for that is a screwdriver type device long enough for the empties to remain in the tube until the clip is empty - and then you can dump them out. Available at Brownells. Here's my "demooner" (not a Brownells, but same design)... Adios, Pizza Bob
-
Do I need a revolver?
S&W did (model 547) - it was a patent inftingement lawsuit (S&W suing CA) that held up the intro of CA's "clipless" offerings. And regarding .45 AR - you can buy the Casper Milquetoast (there's a reference that dates me - google it) factory, RN lead bullet loads, or Black Hills makes some super .45 AR using cast lead 250 gr SWC. The polymer moonclips are the easiest solution, unless you intend to compete. Adios, Pizza Bob
-
Any other 44M SA handguns?
Don't know anything about the DE's, but is one of those made in the US and the other by IMI in Israel? Just a WAG.
-
Do I need a revolver?
Not if you shoot .45 AR
-
First Pistol- Thinking of Buying Used
If a CPO is what interests you, you may want to give Jim Flynn a call. He sells a lot of Sigs and for a private dealer (as opposed to a big box) they would be more predisposed to giving him one than most LGS's. He may not be able to either, but it's worth a phone call and he would be more likely than most. Adios, Pizza Bob
-
First Pistol- Thinking of Buying Used
Sig has a CPO (Certified Pre-Owned) program. The gun is gone through and springs and any necessary components vare replaced and they come with a one year warranty. CPO's may come from one of three sources - Police trade-ins / Salesman's samples / Warranty buy-backs, with police trade-ins being the most common. Hard to find at your LGS because Sig really isn't in the "Used Gun Business". They take police trades in order to sell them new ones. If they can dispose of the trade-ins en masse, they do so. That usually means they sell them to a big box store like Cabela's, Gander Mtn or Bass Pro. They can afford to buy and warehouse large quantities and have multiple retail outlets through which to dispose of them. CPO's are found in the red Sig boxes, with red Tyvek bands on the grip. Adios, Pizza Bob
-
.375 h&h magnum bullet pushed into case
Just FYI, Nosler makes a 260 gr ballistic tip bullet. I relly didn't look much further than that, but there may be others out there.
-
Purchase permit?
Nobody has really given you an answer to your question... <<Went to get the extension but was told being it expired it could not be extended. Have to reapply for new permits. Does this sound right that being it expired the day before it can't be extended??>> The correct answer is, no that is not correct - it CAN be extended. However, as was pointed out by multiple posters, it is at the discretion of your PD. If they are under the impression that they are not allowed to extend it once it reaches the expiration date, they are wrong. If it is that PD's policy not to extend it once it reaches the initial expiration date, there's not much you can do. I think you ought to inquire if it is policy, or are they under the mistaken impression they are not allowed to extend. Regardless of when you have it extended, it will only be good for 180 days from the date of original issue. The clock on the 90 day extension does not start on the extension date, but the issue date. Adios, Pizza Bob ETA: Well, I guess I type too slowly. Definitely push the issue. It would certainly be worth it to them as a manpower issue.
-
Upcoming gun shows
Frank: Come down to CJRPC and shoot in the USPSA match
-
.375 h&h magnum bullet pushed into case
You're supposed to be using solids in an H&H anyway Does anyone make ballistic tipped bullets in that diameter - cushion on the bullet, not the mag.
-
Do I need a revolver?
Everybody needs at least one revolver. Nuff said.
-
.375 h&h magnum bullet pushed into case
Since the case headspaces on the belt, it would be acceptable to roll crimp the case mouth into the cannelure (providing it has one). Don't go overboard because you could slightly bulge the neck and not be able to chamber the round at all. Adios, Pizza Bob
-
Updates on Range 14 construction?
Aha! Practicing for Sunday, huh? That's not fair.
-
Tinton falls PP time? New crim hist check?
The non-criminal background check (Form SP-212A) is done in leiu of fingerprinting and is required everytime you make application for a FPID (new, replacement, change of address, whatever) or P2P's. Three forms required are: STS-033 Application SP-212A Non-criminal Background Check (Initial application requires fingerprinting) SP-066 Mental Health Background Check Anything above and beyond these is illegal. Adios, Pizza Bob
-
Red Dawn
That was too damn fast. Was it that easy to find? Attaboy x 3 Nick. Visited a friend there in 1995 - stayed in an old time hotel right on the town square. My friend used to write for the local paper - The Las Vegas Optic. Adios, Pizza Bob
-
Red Dawn
Three "attaboys" (or attagirls) to the first person that can tell me where it was filmed - the real name of the town where the high school was located. Town and state please. Adios, Pizza Bob