Everything posted by Pizza Bob
-
First time NJ gun purchaser questions
With an FPID you can: Purchase long guns from an FFL in-state or out of state (need COE also) Purchase long guns FTF from another NJ resident (also need a COE) Purchase handgun ammunition Purchase long guns from a non-NJ resident through an FFL in either the seller's or buyer's state of residence You can have nothing shipped directly to you. You need a P2P to purchase a handgun from an FFL or privately from a NJ resident You can purchase handguns out of state, in person, via Internet or otherwise, but they must be shipped to a NJ FFL where you will need a P2P to take possession of them. You can also purchase handgun ammo with a P2P, but good luck finding a vendor who knows this. Yes, FFL dealers at gun shows have the ability to run background checks No you cannot use your wife's firearms without her being present The P in FPID is for "Purchaser". If you are traveling with long guns or handguns within the exemptions granted, you do not need to have your FPID with you. If you travel outside the exemptions with long guns (their is no provision for traveling outside the exemptions with hand guns) then you must possess an FPID. That being said, not a bad idea to always have it with you - at the least, it shows you were not a prohibited person at time of issue. Proof of ownership should not be necessary unless it is more than just a traffic stop. HTH Adios, PIzza Bob
- A day out at Winslow
-
Steyr Update
The letter doesn't designate age, it designates configuration. The M-A1 is the full-size pistol. The S-A1 is the compact version and the C-A1 is a hybrid (think 1911 Commander) - full size frame of the M, with the slide of the S. There are several generations of the A1 series of pistols. The most current (which is what mine is) are easily differentiated by the crosspin through the slide just under and to the rear of the rear sight dovetail. Also the loaded chamber indicator (a pin protruding from the rear of the slide - think XD) has been eliminated. In all generations there is a hole in the barrel hood to check chamber status without retracting the slide, so the LCI was redundant. Adios, PIzza Bob
-
Steyr Update
The major distributors should have them. Paul found two pretty quickly when he was looking for mine. Paul is well acquainted with what constitutes the latest generation. I'd suggest you talk with him. The whole problem with the FTE is that it is inconsistent. Some guns (most) run fine right out of the box. Those that don't (like mine) require a new extractor. Steyr's CS is excellent. One phonecall on a Tuesday - received the new extractor on that Friday. Installed on Saturday and back out to the range the following Wednesday - problem solved. Aside from the inconsistent nature of the problem, the fact that Steyr is a relative unknown - at least compared to the likes of the big three tactical tupperware makers - their inventory does not turn as fast, likewise those guns in inventory at their distributors and dealers. So it's possible to have bunches of the latest generation guns out there in the distribution channels, but they may have "born on" dates 12 or more months apart - so it is awfully hard to say which will work and which won't Since Steyr effectively only has one model in two calibers (used to be three) the problems become known pretty quickly. The Internet is a two edged sword - it can be a great source of information, it can also take a relatively small problem and make it seem like a very big one. The thousands of people who are perfectly satisfied, and have had no problem with the product, usually aren't heard from. The 20 stridently vocal customers with a problem, spread it like a virus. The Steyr is a great gun and I have to believe the pundits that said, the Steyr M, S and C series pistols are what the evolution of the Glock should have been. Adios, PIzza Bob
-
Steyr Update
The whole saga can be found here... http://njgunforums.com/forum/index.php?/topic/29494-omg-%e2%80%93-what-have-i-done/ ...if you are only interested in pictures they are in post #22 of the above thread. Adios, Pizza Bob
-
Steyr Update
For any of you that may have been contemplating purchasing a Steyr, but were turned off by the FTE probelms I had with mine, just wanted to let you know it is fixed. This is a known problem with Steyrs and the fix is to install an updated extractor - which is exactly what I did. I subsequently reported that it ran 100+ rounds at the range without a bobble, with three different bullet weights (147, 124 and 115 grains) and three different bullet configurations (RN FMJ, FN FMJ and JHP). Today was Shongum's monthly USPSA match and I am happy to report that the gun ran flawlessly through 100+ rounds (all 124 gr FMJ). This is a really great gun with fantastic ergonomics, a great trigger and unique trapezoidal sights that are quick to acquire. The low bore axis mitigates muzzle-flip and makes follow-up shots quick & easy. One feature I really like are the mags (made for Steyr by Mecgar) because they have witness holes for all rounds. Odd numbers down one side and evens down the other. Especially helpful in a division that limits you to 10+1 and the mags are 15-rounders. I've come to the dark side and I'm loving it - at least with this Steyr. See you at CJ on 2/12 weather permitting. Adios, Pizza Bob
-
Applying for new permits
No, day one of the 30 day period is the day after you have taken possession. You may purchase again on day thirty-one - thus having a thirty day period between purchases. This has been discussed ad nauseum. Adios, Pizza Bob
-
Off the shelf ammo size variance?
That's pretty significant and probably the result of bullet setback caused by rough handling during shipping. If you have a caliper, I'd measure the rounds and document the variance and contact Federal. Do not shoot the short ones - bullet setback can/will increase pressures. Adios, Pizza Bob
-
Applying for new permits
The SBI-212A - Non-criminal background check ($18) is required for each STS-033 Application submitted - except initially, when fingerprinting is done. Those departments that are waiving the 212A, if one has been done recently, are the ones in violation - not those that require it (it's actually not the PD requiring it, but the state). Once you have been fingerprinted, any subsequent submission of a STS-033 requires the application itself, the Mental Health check (form SB 66) and the Non-criminal background check (form SBI-212A). The application and mental health check form are downloadable from the NJSP website. You can only obtain form 212A (which is yellow) from your local PD. Adios, Pizza Bob
-
can someone clear up the issues with hollow points?
:thsmiley_deadhorse: :thsmiley_deadhorse: :thsmiley_deadhorse: :thsmiley_deadhorse:
-
What about Kel-Tec?
Wait a minute, wait a minute here - you're a Glock guy and you think that YOU'RE a pistol snob You need to get out more. Oh, wait - it was KenW we were supposed to gang-up on. Nevermind.
-
USPSA February Match at Shongum
With a rifle side match scheduled for afterwards, they try to have the pistol portion done by 3:00 or 3:30 at the latest. Ron also said last time, that due to the cold weather, stages would be kept relatively short & simple. I think this one calls for 100 rounds. Adios, Pizza Bob
-
CCW for the old folks like kenw
I hear ya' Frank. That's why I drive a relatively rare car - less chance of mistaking someone elses for mine. Have to admit I love that one cell phone service commercial where the momen doesn't understand why her station wagon remote doesn't open the Bentley. Adios, Pizza Bob
-
Steel cased Ammo?
All right Frank, turn in your mancard, now. You were already suspect with that foo-foo dog, but this seals the deal
-
USPSA February Match at Shongum
Point of the hip rearward, on both sides.
- Is the STI Trojan Model Worth The Extra Cost Over the Spartan?
-
USPSA February Match at Shongum
Thanks for the clarification, Nik
-
Question on IDPA Divisions & Guns
Hey, whatever. IDPA is all about using a defensive gun you own and may actually carry. Shoot what you shoot best, but no need to get anything new. Of course if that's the excuse you want to use, feel free, I've used it a number of times myself.
-
RTSP - Saturday 4th Feb 2012
Sheeesh, wombat, thought I'd finally see your a$$ at the USPSA match at Shongum.
-
Question on IDPA Divisions & Guns
No! Just download your mags to 8+1. Level playing field. SAO, major caliber. It is just that with the 8 round mag limitation the 1911 is the most common pistol in this division.
-
Question on IDPA Divisions & Guns
So you only load 8+1 and you can shoot it in CDP
-
Question on IDPA Divisions & Guns
Doh!
-
Question on IDPA Divisions & Guns
j0n, what the heck is BLF? Best Lesbian Friend? I'm an old fart, be kind. I believe that your XD 3.8 could shoot either ESP or CDP. You are handicapping yourself in ESP as you are shooting against minor calibers. Not sure what the mag capacity is of the XD 3.8, but you would have to load a maximum of 8+1, per CDP rules, but you would only be shooting against other major caliber shooters. Adios, Pizza Bob
-
Question on IDPA Divisions & Guns
Guess that answers that. Thanks Nick.
-
Question on IDPA Divisions & Guns
Before I ask my question, I have to preface it with another, that being is the following correct? Glocks, M&P's and my beloved Steyr are all classed as SSP's (Stock Service Pistol). I read somewhere (can't find it now) that the SA XD's are classed as ESP's (Enhanced Service Pistols). OK, if the above is true, why? I was under the impression that all those pistols named are striker fired pistols that operate from a partially cocked condition in a DAO mode. Why the discrimination against the XD? Adios, Pizza Bob