Everything posted by Pizza Bob
-
range in your basement
Basement range? Just the place to shoot that .50 BMG you want
-
Watch out airsoft owners...
This is kind of interesting. I wonder what they were charged with? IIRC there was a bill that attempted to make airsoft guns be considered firearms - and the way our laws are written, they actually do fit the definition as the determinate facior is whether they can injure someone, which is far from specific. Schools have a lot more latitude, as far as what they consider weapons. I have read of students being suspended under zero tolerance policies for wearing T-shirts with the image of a gun on it. I don't remember running across this in my perusal of the NJ statutes, but isn't there usually some type of "replica firearm" law in place - for those that may try to rob a bank with a toy gun? I assume they could be charged under that. This one may bear watching. Adios, Pizza Bob
-
Changing an ambi-safety to a single-sided safety on an EMP?
Another question is: Will a standard 1911 thumb safety fit the EMP. IIRC, Springfield made a big deal about how this gun is a scaled down version of a 1911 - not just a chopped standard 1911. So, is the safety one of those scaled down parts? Adios, Pizza Bob
-
kimber raptor? 1300?
Use the Price Request feature here on the forum.
-
Holster For Lefty For Uspsa
I think Maks means correct on both counts. You can remove the drop/offset component and, yes, you will end up with a drawerful of holsters I took the D/O piece off my holster and new ones are ordered without it. Consistent placement of the firearm on the belt, relative to the hand helps consistent performance - and I need all the help I can get. Adios, Pizza Bob
-
Buying Rifles at Cabela's
They probably will not sell to you without matching addresses (DL to FPID). But as has been discussed this is not in the statutes. However, IIRC, there are time limitations for address changes on both your DL and FPID card. If your out that way, I'd stop anyway. Can't ever tell, they may sell to you. Adios, PIzza Bob
-
Desert tactical arms good or no?
I think Shane has one. My friend in Wyoming has one in .338LM, and enough land to make use of it. He's currently building a 1K yard range and an underground SHTF house. Here's his Desert Tactical... Major investment. Adios, Pizza Bob
-
Holster For Lefty For Uspsa
Here's the link to the LH DOH holster for a Glock 22. This is with the Tek-Lok attachment, but can be had with their Stingray belt loop too. http://www.blade-tech.com/Dropped-Offset-Holster-w-Tek-Lok-pr-1167.html If you intend to shoot both USPSA & IDPA the drop & offset can't be used for the IDPA. You may want to just get the holster without the DO so that you are consistently drawing from the same position. JMHO. Adios, Pizza Bob
- additional paper work from PD for PPP
-
$18.00 fee
While I am not even sure what this is, or means, it seems that is exactly what the local PD is supposed to do as per the NJSP App Guide... "Check the applicant through the Interstate Identification Index utilizing the 'F' purpose code. A III should first be run under the 'QH' screen. If a record is returned, proceed to the 'QR' screen." This is why there needs to be some oversight of the investigative process. Adios, Pizza Bob
-
additional paper work from PD for PPP
If they are making this (the initialing of the safety rules) a requirement to obtain your FPID or P2P, then it is illegal. Good, bad or indifferent, they are not allowed to do that. There was a thread a while back where we discussed some of the "good" violations - those that may actually speed-up the process, and the general concensus was that if we allow them to get away with those that benefit us, we are setting a precedent and the next requirement may not be so beneficial - shooting ourselves in the foot, as it were. No problem with them just handing them out to each applicant, but to make issuance conditional on initialing these rules is a no go. Adios, Pizza Bob
-
$18.00 fee
USPS MO made out to: "Division of State Police - SBI"
-
If You Have A S&w 686/586 And...
Did you guys forget me?? Thanks Zardoz. Thinking of getting a FO front sight for my 646. I wanted to know if the 646 and 686 use the same height front sights. Mine comes in at .270" and Zardoz's at .278". The Dawson FO for the 686 is listed at .230" which has me somewhat concerned as I don't have a lot of downward adjustment left on my rear sight and not sure how much of a difference .040" will make, but that seems substantial. Adios, Pizza Bob
- Holster Type Restrictions Within Competitions
-
I-Phone Case
Jesus Nick, just walk away, it's a fait accompli.
-
Holster Type Restrictions Within Competitions
They make the revolution ones with Tek Lok for the same money, but I can't find them on their website - TESSA!!! - However, Brownells does have them... http://www.brownells.com/.aspx/pid=41583/avs%7CManufacturer_1=BLADE-TECH/psize=24/Product/DOUBLE-MAG-POUCH-W-TEK-LOCK Here's the rub - can't find the holster on Brownell's site. Only the Black Ice, which, from the description, may be cut too low in the front, or non-Tek-Lok holsters. It's a pain to pay two shipping charges. Maybe a call to either vendor will clear things up and give you a single source. Good luck. Adios, Pizza Bob
-
Spotting Scopes, Looking For One. What To Look For
Konus, from what I've read, gives you the most "bang for your buck" in an economy priced scope. Get the biggest objective lens that falls within your budget - with the Konus that would be the 80mm objective - kick it up $50 and you can get a 100mm objective. 60x is the absolute max and if you don't have the big objective you'll be hard put to make use of all that magnification. One other thing - invest in a good scope stand - tripods, like you mount a camera on, suck. Look at Freeland spotting scope stands. About $125 - so it can go on the wish list for later. Good luck. Adios, Pizza Bob
-
Holster Type Restrictions Within Competitions
Just got an order from Blade Tech and it took 14 days total. Alec - look at the injection molded double mag pouches from BT. They run $27 and you really only need two (mag in pocket for initial load) unless you are shooting single stack w/8-round mags, then you might want more. I like the Tek-Lok belt connection. Not quite as stable as the stingray, but very easy on & off if you intend to use the same holster for multiple disciplines where you may change the holster from a dedicated comp belt to the one that holds up your pants (as stated - you can use the inner belt only for IDPA). If you go BT, just get the regular "belt holster" with the attachment of your choice (stingray or tek-lok) and you'll be GTG for USPSA and IDPA. Stay away from the dropped/low-cut comp holsters if you are going to compete in several games. Adios, Pizza Bob
-
Seven-Shooter? Really?
A seven-shot cylinder actually is stronger than a six-shot of the same diameter. With a six-shot cylinder the bolt notches are cut right over the chamber, making that area the part of the cylinder with the thinnest wall. With a seven-shot cylinder, the bolt-notch cuts are actually between chambers, making chamber wall thickness uniform (no thin spots). That being said - it depends on what you intend to use this revolver for. Range/plinking? Doesn't really matter. I usually only load five chambers anyway when I am just plinking at the range. However, if you intend to compete with a revolver (which seems to be growing - just from my observation), then both IDPA and USPSA limit you to six rounds - regardless of how many holes are in your cylinder. I don't shoot steel, but I believe that anything goes - 7-shot L-frames or 8-shot N-frames both fly here. Likewise for ICORE, but the only place I know of that has ICORE matches is Ontelaunee in PA. If it is for HD, then more is always better. Don't let the mere number turn you on or off. Determine to what use you are going to put your wheelgun and buy accordingly. JMHO Adios, Pizza Bob
-
I-Phone Case
OK, given my contrary personality, I totally went against the winner (otterbox) and got an Ivyskin Wrangler - with a tip of the hat to RichieDubs. I was predisposed to one of the other two, until I read the description of the Ivyskin. I like the "touch-through" glass and the combination of protective materials. She carries her i-phone in her purse, so it was protection from all the other junk in there that was required. She also requested a bright color (I ordered red) to make it easy to find in that morass. Thanks all for participating. Adios, Pizza Bob
-
If You Have A S&w 686/586 And...
...a vernier caliper, could you do me a favor and measure the height of the front sight blade? That would be from the top of the sight base to the top of the blade. Just list the height (.000") in your reply. Also list if it is a 4" or 6" barrel - I don't think it makes a difference, but just in case. Thanks! Adios, Pizza Bob
- Kimber Pepper Blaster Ii
-
C&R liscense and NJ. specifically m1 carbine
Quote § 921. Definitions(a) (13) The term “collector” means any person who acquires, holds, or disposes of firearms as curios or relics, as the Attorney General shall by regulation define, and the term “licensed collector” means any such person licensed under the provisions of this chapter. The AG defines it here, "....A collector of handguns as curios or relics as defined in Title 18, United States Code, section 921(a)(13) who has in his possession a valid Collector of Curios and Relics License issued by the Federal Bureau of Alcohol, Tobacco, Firearms and Explosives." The collector of non-C&R firearms has the option of using the standard OGAM exemption forms. This may be one of those things where we have to agree to disagree and the likliehood that a test case will ever settle the question is about nil. Adios, Pizza Bob
-
C&R liscense and NJ. specifically m1 carbine
Bob, I don't want to split semantic hairs with you, but I think the use of the word as, twice, in the sentence, "A collector of handguns as curios and relics as defined..." pretty much connotes that the handguns being collected, and thus exempt, must meet the definition of "curios & relics" as defined by the federal statute. Almost a moot point as most people don't want the hassle of obtaining a C&R license for the limited benefit you derive from it, here in NJ. Adios, Pizza Bob
-
I-Phone Case
SO has a new i-phone 4G-S and would like a case. Which would you recommend?