Everything posted by Pizza Bob
-
Chiappa Firearms to Install RFID Chips in their Guns
Think so? http://venturebeat.com/2010/07/30/hacker-tries-to-read-a-radio-identification-tag-from-29-floors-up/ Excuse me while I get fitted for my hat. Adios, Pizza Bob
-
Usefull PA AG decision on CCW with a nonres permit..
That was more than two years ago - for that matter it was Corbett who wrote the quoted clarification, in his, then, capacity of AG under Fast Eddy Rendell. Maybe you're confusing this with the recently passed (illegal) Philly Ordinance to close the "Florida Loophole". If that is the case, it was discussed here, start with Post #7 http://njgunforums.com/forum/index.php?/topic/24475-ut-and-fl-ccw-class-may-22-2011/ HTH Adios, Pizza Bob
-
Employer Reference Problem
See post #48
-
Employer Reference Problem
j0n: AFAIK, there is no NJSP "Employment Verification Form" - at least there is none included, or even referenced in the NJSP Guide. There is simply an instruction that says, "Verify the applicant's employment by contacting their employer". This is item #22 under "Investigation of the Applicant". If your dept is sending out a form, especially one disclosing the applicant's desire to purchase a firearm, it originates with your dept and not the state police. Again, and this can't be said enough, an applicant's employer has no business knowing their employee desires to purchase a firearm. Adios, Pizza Bob Has this gotten to the :thsmiley_deadhorse: stage yet?
-
Employer Reference Problem
It's a stretch to think the employer saw the form. As for the reason for verification: "Non-criminal background investigation" is all that needs to be said - and all that should be said. If the employer volunteered any info, then I hope she bankrupts them in court. Adios, Pizza Bob
-
Chiappa Firearms to Install RFID Chips in their Guns
Chiappa Firearms has announced that they intend to install RFID chips in their firearms, commencing appx a year from now. They state that this is for production efficiencies and to make it easier to comply with Italian law. Bloggers, while not disbelieving Chiappa & MKS (the US distributor), were quick to point out that RFID chips can be detected (maybe not read, but detected) at distances much greater than the 3" Chiappa stipulates is the range. The fear here is that they will be used for covert weapon detection among civilians. To add fuel to the fire, MKS released a press release (follows) ridiculing their intended customers as being paranoid conspiracy theorists. Now I have been advised, on several occasions, to don my tin foil hat, and this may yet be another. I object to this on the grounds of the continuous trend of electronic erosion of our privacy. If this is to be simply a production efficiency, why not connect the tags to the firearms with some easily removed method, by the consumer? Nylon tie wraps spring to mind (I don't want to have to take the grips off and pry a hot glued chip off the frame, possibly damaging the finish - besides, this is NJ where they will probably mandate that it remain intact). I think Chiappa/MKS have shot themselves in the foot with the American consumer, and I e-mailed MKS (in Dayton, OH) to that effect. You, the consumer, are the deciding factor - what do you think? Discuss. Adios, Pizza Bob Here's the MKS Press Release... MKS Distributing, Dayton OH, July, 2011-Distributor for Chiappa Firearms Recently there has been some blogger activity (credibility always guaranteed) concerning Chiappa Firearms putting a RFID (radio frequency identification) in Chiappa Firearms. Yes, but Chiappa will not be using the RFID system for at least a year. RUMOR: (known as blogosphere food): The erroneous information about some sort of "chip" was put out by a blogger who translated Chiappa (Italian) technical information incorrectly. The incorrect translation and his interpretation came out as some sort of a GPS type tracking "chip" -which RFID isn't as it cannot transmit anything-it has NO power source (unlike cell phones). THE FACTS: Recently several Italian gun makers (not just Chiappa) decided to utilize RFID technology to improve manufacturing and provide more accurate inventory control. We guarantee this technology will proliferate to other gun makers world wide as it is so efficient for everything from production QC control to export/import varification. Other industries already use passive RFID technology such as on DVDs, sunglasses, clothes and even some food products for example. Basically Chiappa RFID (again it is radio frequency identification) assists the manufacturing process, inventory control and shipping. The type of information on the RFID ties in the firearm and proof house verification; the latter is required by the Italian Government for all firearms made in Italy. Passive RFID is also a final check that verifies that what is inside the sealed box is the same thing as shown on the box exterior bar code during shipping. Now, it will no longer be necessary to open/inspect hundreds of boxes by hand prior to packing in export containers. BOTTOM LINE: The Chiappa PASSIVE RFID can be read ONLY when passed within (2-3 inches) of an active (and powered) reader that is dialed in for the particular long antenna radio frequency of the RFID-this is not random. And it will NOT go into operation for a year or more. SUMMARIZING: RFIDs have NO power source or GPS locator. Rest assured they are NOT transmitting your identification and location information to a Chiappa Firearm tasked CIA satellite. RFID Removal: For those still concerned you can simply remove the grip and remove the hot glued RFID from the frame in the grip area when (over a year from now) these begin to appear. Others may prefer to wrap the revolver and their head in aluminum foil, curl in a ball and watch reruns of Mel Gibson's 1997 film, Conspiracy Theory. Well, that's a plan too!
-
Employer Reference Problem
j0n: There is a vast difference between "verifying employment" and what this woman was subjected to. The NJSP Guide states that the investigating officer verify employment - that is all. For an HR Dept to do anything else - unless under court order - violates all kinds of privacy and makes the company liable. The PD in her town (and many others throughout NJ) treated the employer information like it was a reference - that's plain wrong and I hope it gets rectified in the courts. I hope invasion of privacy gets added to her wrongful termination suit also. NJScott: The STS-033 form - which you are required to complete - asks for the employment information, which is supposed to be used to verify employment, and for two personal references that are not immediate family. What the PD cannot do is require that your references be local, or even NJ residents. Adios, Pizza Bob
-
Employer Reference Problem
One more PM sent your way. (only doing this because you're new and I'm not sure that there is automatic e-mail notification)
-
Non criminal background check
No, the point of purchase check is called a NICS check and is done electronically. An approval number is given to the FFL. You should have filled out a yellow form (SBI-212A) which is for a non-criminal background check. This is done in leiu of fingerprinting, now that yours are in the system. Adios, Pizza Bob
-
Employer Reference Problem
08758 Sent you a PM Adios, Pizza Bob
-
Magazine rebuild kit legality?
IANAL, but it seems to me that constructive possession is simply a concept in law - neither specifically federal or state. If you have all the pieces in your possession of a particular prohibited component, and they may be assembled to create a working rendition of that component - you are in constructive possession. In NJ, regarding magazines, you do not have to be in possession of a firearm that accepts the magazines, possession of the magazines themselves is unlawful. Your example about repair would only be a viable defense if the individual parts; i.e. springs, followers, base plates and body, were not available separately. Easier, and legal, just to make a friend in PA and store your SHTF mags with them. Not worth the risk in NJ. Adios, Pizza Bob
-
Magazine rebuild kit legality?
Did a quick perusal of the statutes and couldn't find anything specific to your question. However, I think we kicked this around before and decided there may be a case there for constructive possession. There is a statute about the manufacture of large capacity magazines that may have some teeth in the case of a magazine repair kit. Stupid to take the chance. JMHO. Adios, Pizza Bob
-
Major KB with Reman USAmmo
See edited info in Post #1. There has been a second KB with a different lot of ammo (number added in post #1)
-
Pepper Blaster
That one would be illegal, by 3/100ths of an ounce. Gotta love NJ
-
Cars
My EDD: 2009 Pontiac G8 GT My Toy: 1990 Corvette Z51 Adios, Pizza Bob
-
Major KB with Reman USAmmo
Don't want to be a wet blanket, but I know many of you took advantage of the Gearhog coupon deal and bought some USAmmo. This catastrophic failure took place with a S&W M&P15 in 5.56. Here's the ammo (reman by USAmmo) being used... USAammo 223 55 gr FMJ Lot #2906113. EDIT: Here's another Lot # that just caused a KB at a PA range: 99061135 At this point I think all 5.56/.223 ammo from this vendor should be suspect. Apparently the company is making good on the destroyed rifles. In the same article, the CEO of USAmmo admitted that, "...some of his ammo has been overpressured due to "Western" powder supplier using powders with faster burn rates." In this same shooting session, the shooter that had the KB had a friend that was shooting an AR-10 with USAmmo with 175 gr match bullets and he experienced many stuck cases - which would be indicative of overpressure loads. If you ordered 5.56 ammo, make sure you check the lot number against the above. No lot # given for the .308 - sorry. Be careful. Adios, Pizza Bob The full article with pictures can be found at The Firearm Blog
-
What's your fav .40?
Chris: The "original" 10mm was the Bren Ten (even though only very limited production was achieved - and no production magazines saw the light of day), it was for this gun that Col. Jeff Cooper designed the cartridge. And if you really think about it the .41 magnum (1964) preceded that by almost 20 years - and there was the .41 Colt before that (although I don't know the actual bullet diameter of that cartridge). Just sayin'..... Adios, Pizza Bob
- What's your fav .40?
-
Stockpile ammunition in NJ? is it ok?
Just curious what the OP considers "significant quantities". Now, glennp.....he has significant quantities.
-
I think I may have a problem
I have the Bry@n disease......I just ordered six mags for a gun that I don't own and is not yet available. The mags are backordered until Sept, so it'll be interesting to see if the gun becomes available before the mags arrive. Permit and money in hand, just need a little cooperation from Sig. Adios, Pizza Bob
-
Cars
Just look at some of the avatars and screen names. Then there are those of us that remain icognito. It was not only an avocation of mine it was also my vocation, in one form or another for over 35 years - from aftermarket to OEM's, cars to commercial vehicles. Seems to me that cars and guns just kind of go together. Adios, Pizza Bob
-
Langhorne Rod and Gun Club?
Just know what I have read, so if this is incorrect and a member reads this, please feel free to set the records straight. This used to be a very aggressive black rifle / military style club. Many shoots with AR's, AK's and milsurp. Seems there was an "old guard" coup and they have taken the club more mainstream now. Not to say they don't still have black rifle events, but they aren't the driving force of the club, that they once were. That may be good news or bad, depending on your perspective. Kind of moot anyway, given they aren't accepting new members. Did it say how long the average wait is? Adios, Pizza Bob
-
coyote
PA hunting laws can vary from year to year. They sometimes have a season on fox. Even when it was open season otherwise, you couln't hunt them during whitetail season. Coyotes are considered varmints (not game animals) and as such are open season - as defined by PA. Adios, Pizza Bob
-
Is this shotgun NJ legal?
Fixed it for you
-
Suggestions of PA/NJ border towns
To go into NYC, you can use Trenton (Amtrak, NJT), Hamiltom (NJT) or Princeton (Amtrak, NJT). When my SO was commuting into NY she would use NJT out of Hamilton. Easy access to the station from I-295. HTH Adios, Pizza Bob