Everything posted by Pizza Bob
-
Somerset IDPA Match - 7/17/11
Due to range constraints, SCFGPA IDPA is limiting the number of participants to 32 (two 16 person squads). If you want a spot, you have to e-mail Tom to have him add you to the roster. vjf915 and myself are in. Adios, Pizza Bob
-
USPSA Match At CJRPC Sunday, July 10
Special kudos to our own Maks, for the stage he designed. It was my favorite of the five presented and the first one that "flowed" for me. Also my first experience with a Texas Star. Good thing it was close and slow. Everyone was basting themselves regularly and dosing themselves with plenty of liquids. Considering it reached 89, it wasn't too bad - except for the lack of shade. I'd like to try a Shongum match, but Saturdays can be problematic. Walk-in IDPA tomorrow night (Monday 7/11) at Ready, Aim Fire in Bristol, PA. 4 PM to 9 PM - no entries after 8 PM Adios, Pizza Bob
-
Federal law against permanently altering high cap mags?
Look at it from a logical point of view. Since there are no Federal laws regarding magazine capacity (yet - sorry ), why would there be any laws about altering magazine capacity?
-
I think I may have a problem
As long as that is PER gun
-
Belt / Holster setup questions
Kydex is the way to go for competition. IDPA is easier to get into - equipmentwise - than USPSA. Suggest you go to the respective websites of the two competitive bodies and read the rules for equipment. Much easier than trying to list it all here. You can use your IDPA approved rig to shoot USPSA (with some additional mag pouches), but the reverse is not always true. Adios, Pizza Bob
-
Alabama Holster Company - anyone own one?
Not yet. He told me it was shipped Tuesday and it would be here today. USPS didn't cooperate. Hopefully tomorrow or Monday. Would like to try it out on Monday night at RAF in Bristol, PA. They have an IDPA match set-up. If not then, then the following Sunday at SCFGPA. Greg (AL Holster Co.) said that when it came time to make mine, he forgotten that it was for a 646. Said he didn't want to just do a generic L-frame (although that would have been fine) and he has a friend with a 646 - but he was out of town. Just came back last Saturday and Greg borrowed his 646 to mold the holster. I'll let you (and the board) know - especially since you ressurected this thread. Adios, Pizza Bob
-
Happy Birthday Dan
Many Happy Returns!
-
10yr old girl shoots USPSA
Damn, she shoots faster than I do. And where do you get that "coach" that follows along behind and points out targets and tells you when to change the mag???? If I had one of those, I'm sure I'd do better.
-
Full-Moonclip Goodness
A S&W 646... I've put rubber Hogues on it for competition. Using an Alabama Holsters kydex Ranger holster and a North Mountain dual moonclip holder, primary and a TK Custom single holder, secondary. It'll be interesting. Adios, Pizza Bob
-
Full-Moonclip Goodness
Within the nexr week I am going to attempt - operative word, "attempt" - to shoot an IDPA match with a revolver. I know this will just prove that I can be equally incompetent with both semi-autos and wheelguns, but being the wheelgun proponent that I am, it seems only fitting. With the help of Victor (vjf915), who got to try out his new drill press, I came up with this means of carrying my revolver ammo... It is dimensioned to fit into the center compartment of my range bag and can hold 27 full-moonclips (162 rounds), which should be enough to make through a match and then some. The moonclip tool really makes loading the moonclips easy and the opposite end has a tool for removal. The gold mandrel is for .40 S&W and the black spare is for .45 ACP. Likewise the smaller loop, on the end, is for removing .40 S&W cases and the larger loop is for .45 ACP. Still waiting for a holster, but the maker assures me it will be here Friday. USPSA at CJRPC on Sunday (no revolver for me). IDPA at RAF on Monday night and again at SCFGPA a week from this Sunday - my debut will be at one of those two venues. BTW - anyone from the Trenton/Ewing/Lambertville area going to the USPSA match on Sunday? My usual partner will be out of town. Adios, Pizza Bob
-
Smith & Wesson SUCK!
That may be exactly the issue. In revolvers made to run rimless cartridges, theoretically you can run without the moon clips since there is a rebate in the cylinder that corresponds to where the case mouth falls - providing the cases are exactly the correct length. Rimless cartridges in a semi-auto headspace on the case mouth, but case length is not as critical as in a revolver application, since the extractor tends to hold the case against the breech. In a revolver, with no moon clips, if the case is short (most are) a firing pin strike can drive the cartridge deeper into the cylinder, thus lightning the strike and it may result in misfires, especially with ammo with hard primers (read that Russian). By using moon clips, the cartridge now headspaces, consistently, on the moon clip, regardless of case length. The other solution - at least with your 625 - is to use Auto Rim ammunition. In either case with moon clips or with Auto Rim, you don't have to poke the empties out individually with a rod, the way you do if you use rimless ammo with no moon clips. Adios, Pizza Bob
-
Don't get pulled over leaving NJ
Where did I say that? The usual belief of those in NJ is that FOPA protected us within the borders of NJ when traveling out of state. Legal @ point of origin - residence / Legal @ destination - free state. Actually, I have also stated what I believe Vlad is trying to say - how can the state restrain you from leaving the state with your gun? If that were the case, we'd all be land-locked. Adios, Bob
-
whats it worth?
Well then, someone has been dry-firing / cycling the action. The turn line will show-up more on the frosted finish, but that one is pretty definitive and it may be a hard sell to get a buyer to believe that it has never been fired. But if that's the case and with the hard case, you could probably realize the high end of my estimate. Remember, new .38 Spl J-frames go for around $400. New Model 60's use the Magnum J-Frame which was introduced in 1996, so you can't compare your .38 Spl model 60 to those chambered for .357 magnum, in terms of value. HTH Adios, Pizza Bob
-
Don't get pulled over leaving NJ
Seemingly well researched, although I find it hard to believe that the intent of FOPA was to exclude the origin and destination states. But, giving this credence, just remember, should you get stopped during the NJ leg of your journey to freedom, simply state that you are traveling under one of the NJ exemptions - Going to the range / Going to an FFL etc. Once you are in PA (with a recipocal permit), you're golden. Adios, Pizza Bob
-
whats it worth?
I guess I'd be for getting her to keep it also, but a J-Frame S&W is a handful for an experienced shooter, let alone someone that is unfamiliar with the gun and has not shot anything, let alone this J-frame. If she never shot it, I assume she bought it used (although if she got it in 1989, it couldn't have been that used since that was the year of introduction). I base that on the fact that there is a fairly pronounced turn-line on the cylinder - although that is partially because of the "frosted" finish these Ladysmiths came with. Does she have the original burgundy plastic hard case it came in? Regardless, it is still a used J-Frame and in the condition indicated by the photographs, I'd say $275 - $350 depending on how quickly you want to move it and whether it has the original case. The fact that it is the first run of Ladysmiths may add marginally to the price, but since it has been fired, it won't be of interest to serious collectors. Keep it. Learn to shoot it. Adios, Pizza Bob
-
Smith & Wesson SUCK!
Ray, chances are that will do it. Light primer strikes on a Smith are almost always a result of someone attempting a "screwdriver-trigger-job" by backing off the strain screw. If you find it backing off on its own (I've never had that happen, but apparently some here have) use some purple - NOT BLUE, and especially NOT RED - Loc-Tite. Good luck. Adios, Pizza Bob
-
lets play a game!!!!
Killed this thread, didn't I? OK, it was produced in 1936 through 1958. Even though it was introduced prior to the Model 70, it had a higher model number. It was the favorite of Alaskan Guides and many were converted to a Wildcat called .401 Alaskan. It was a modification of the Model 1886 design and Browning recreated it in the 1980's. Originally made to shoot 150 gr, 200 gr and 250 gr bullets, by the end of its original production run, only the 200 gr bullets were offered. Too tough? Bueller? Bueller? Somebody out there has to like this rifle as much as I do. Adios, Pizza Bob
-
lets play a game!!!!
The last classic (tube-type magazine) Winchester lever-action rifle was chambered in a unique cartridge - only rifle ever commercially chambered for this cartridge. Model of the Winchester and caliber, please. Adios, Pizza Bob
-
lets play a game!!!!
Metric designation for .30-06?
-
USPSA Match At CJRPC Sunday, July 10
Maks, I'm in. Should we / Can we set something up for NJGF members to squad together?
-
lets play a game!!!!
Uh, Ray....the Model 39 was a single stack. The 59 was a double stack, making it "hi-cap" by today's standards. Ray, you are wrong! (OK to use that in your signature line) Adios, Pizza Bob
-
Baboon loose in Jackson area.
Maybe a better question is: How do you keep a monkey in?
-
IDPA Delima
Consistent low left is usually a sign of poor shooting technique, not the gun. Usually means that you are anticipating recoil and tending to push the gun forward. Before you condemn the gun and spend money needlessly (we could probably all write books on that), let someone more experienced shoot the gun and see if they get the same results. As others have pointed out, concentrate on safety and learning the rules and having fun, before you worry about being competitive. IDPA is nice in that you don't need a ton of equipment to get into it. Blade Tech makes very nice products, and if you think this is something you are going to stick with, then buy a good holster right off the bat. If you are not sure, IDPA can be shot with a $19 Uncle Mikes (kydex not nylon) - but keep in mind you may ultimately buy the better holster. Other than that you only need a double mag pouch (or two singles) and three mags. The main thing is to have fun. Adios, Pizza Bob
-
Baboon loose in Jackson area.
Hey, just because you don't like baboons, doesn't mean you should resort to ethnic slurs
-
Meopta riflescopes
Dan: No experience with Meopta's (starting to get into Shane territory), but the one drawback that I see with the linked scope, is that the parallax adjustment is on the objective lens. I think a side wheel parallax adjustment is more desirable on a tacti-cool rifle, especially if you intend to use flip-up lens covers. Small detail, but may make a diffrence to some (like me). Adios, Pizza Bob