Everything posted by Pizza Bob
-
Another question regarding handgun permits from a new NJ resident
Steph, if their wives knew everything they do, they wouldn't be talking to you
-
Sig p226 e2 vs elite black
The whole raison d'etre for the E2 is for people with smaller hands. If the E2 fits you, then I would find it odd that you think the standard P226 does also. The frames are identical (Steph - the reason for the longer dimension shown IS the beavertail), although there is a modification on the grip frame to allow for the different main spring strut used with the E2. I don't believe the Short Trigger is standard on the E2 P226. Sig's wording is a little misleading. They say, "Used in conjunction with..." when talking about the short trigger, but nothing about it being standard fare. They offered a special deal on a conversion package a while back - to take your std P226 and convert it to E2 configuration. I believe they priced the Short Trigger (not to be confused with the SRT) separately on the conversion. Chances are the E2 you held at a gun store had the standard trigger, and if that worked for you, then go for it. If indeed that was correctly sized for you, the E2 with the Short Trigger may actually be too small (too short a distance backstrap to trigger face). Another option you may want to try - just to tune the fit perfectly - is the standard gun with the Short Trigger. I believe that an E2 gun can go back to standard grips with no modification, although I am not 100% sure on that. Even though the E2 grips are one-piece wrap-around that snap into place (no attachment hardware), I believe that the grip screw bosses are still in the frame. Someone with an E2 will have to confirm this. One last note: Don't worry about the texture - aggressive is a good thing, as Maks pointed out. My only concern with grip texture was that it might catch on a cover garment when carrying concealed, but that has proven unfounded and I love aggressive G-10 grips or aluminum on guns that I carry or game with. Confused yet? Good luck. Adios, Pizza Bob
-
1911 Options - Smith? Sig? or Other...
Depends on what is mission appropriate. Full size 1911 is fine for games, range or HD. Carry one for 12 hours and tell me again how you don't see the point.
-
1911 Options - Smith? Sig? or Other...
For a carry gun the Commander/Officer hybrid (better known as a CCO) you specify in your OP is the way to go. When it comes to CC, the grip frame is what, most often, prints. Barrel length, from a concealment standpoint, isn't much of a problem. The CCO configuration is the best of both worlds - adequate grip frame length, but shorter (by one round) than a Commandr or full-size 1911, and a Commander length barrel - shown to be the shortest viable barrel length on a 1911. (I know, I know, there are umpteen million of you out there with sub-4" barrel 1911's that run without a hitch, but ask any good 1911 gunsmith about making a sub-4" 1911 run reliably). And, of course in a carry gun, the alloy frame is desirable. You have pretty much nailed it in your price range - the S&W 1911 ES and the Sig C3 or RCS - all of which are as described above. The only other one you may want to consider - but it will add $300 - $400 to your price point, is the Dan Wesson CCO. My friend has the S&W ES and I have (and carry) the Sig RCS - I don't think you can go wrong with either. The fly in the ointment is finding one of these. They are high demand short supply type guns. I waited 9 months for mine. Your profile doesn't specify a location (a pet peeve of mine - but we'll let that slide), so don't know where to direct you. I got my Sig from Jim Flynn. He is direct with Sig and has a good inventory turn with them, so is always ordering. I specified for him to wait until he had a 3 gun (total) order, because that way he doesn't pay for shipping (which he will pass on to you, otherwise). Doesn't really delay the order, since he orders so often, so not a big deal. Good luck with your quest. Adios, Pizza Bob
-
Joining OBRPC
The cliche is "...waiting until the 11th hour." Just figured you must be on military time
-
Happy Birthday Bryan.
Heck, if I had known it was about to be your birthday, I would have baked you a cake.....NOT. Happy Birthday! Adios, Pizza Bob
-
Is this rifle any good???
ooops! Sorry, you're right.
-
Is this rifle any good???
Let's not forget the bayonet lug, too.
-
Some smokin' gun sales!
You need an FFL that also does some minor smithing. Our own PK90, here on the forum, fills those qualifications. He's an FFL and he can pin the stock, cut-off the bayonet lug and furnish, pin and weld a comp. I don't want to speak for him, so call or PM him and confirm this is so - but I believe others here have used him in that capacity. Adios, Pizza Bob
-
tactical forearm long or short?
Co-witness means being able to see the iron sights through your optic. Usually there is an absolute co-witness where the red dot or whatever will be perfectly aligned with your irons (sitting right on top of your front sight post). Or, usually, a lower-third co-witness, where the iron sight is viewable in the lower one third of the lens of your optic (below the red dot or whatever). HTH Adios, Pizza Bob
-
AR fustration
Kind of a bite the hand that feeds sort of thing.
-
OK, Now I'm Really Confused
Tony: I understand that. I was just trying on Bryan's belt for fit and figured if it would go over my regular belt, there should be no problem with the iner belt. I was worried about OAL and overlap. Thanks, though. Adios, Pizza Bob
-
AR fustration
Frank: While I certainly agree with you on "Basics", you shoot yourself in the foot in the second sentence - Chinese scopes and Older Scopes - which indicates there is something wrong with the scope, which is what I've been saying all along. A good quality, modern scope, with either fixed parallax or an AO for parallax should not change POA with your eye position - those that do, as you so ably pointed out, are usually old or low quality. On a 3-9X you may see a slight parallax error, due to the fixed parallax correction - but it should be insignificant at the distance he is shooting and the size groups he's getting. As for Benchresters, they do anything they can to eliminate ALL variables. While consistent cheek weld was important to them for parallax reasons when they were using Unertls and such with external adjustments at the rings, now it is just a matter of consistency. Where you place your cheek on the stock can change the harmonics, etc, etc. They are dealing with thousandths of inches, so ANY inconsistency can affect accuracy and group size. Round 3? Adios, Pizza Bob
-
AR fustration
Well, even though you like it, I hate to shoot a hole in Old Schools theory, but parallax is eliminated within the scope. He is showing how "Old School" he is if he remembers scopes where eye placement behind the scope could result in a parallax error. There may be a small degree of error, since, usually, the parallax adjustment on a 3-9x scope is fixed (non-adjustable objective lens) - I believe at 75 or 100 yards, so that shouldn't be an issue. While all those things that glennp said are nice (I do disagree with using Loc-Tite on the rings, however), again, doubtful that any of those issues would result in what you are experiencing, unless the scope rings are so far out of alignment with each other you are binding the erector within the scope - but that would most likely result in a scope that would not adjust. I think that you have an internal problem. Redfields of that era were not known for their high quality (with the exception of the 3200) and you probably have one that has reached its useful life span. Try all those things recommended - another shooter, removing the scope and shooting irons, or replacing the scope with one of known reliable function. You will figure it out - it is highly doubtful that it is the firearm or ammunition. Good luck. Adios, Pizza Bob
-
OK, Now I'm Really Confused
Lets confine any remarks to only the AA or the CR belts please. Those are the two that are in the running. All this talk about pant size +2" or actual waist +4" or actual dimension, AA runs small, CR runs large, etc, etc. has my head spinning. Bryan was nice enough to let me try his AA belt, which was marked with what is my exact pant size (I'll spare him, and myself, any embarrassment by not disclosing - we are, as Gabriel Iglesias says, "Fluffy"). I didn't go to the trouble of threading the inner belt through my pants loops, I just took the outer belt and wrapped around my waist right over top of my regular belt. I should mention that the regular belt is a thick, leather gunbelt by The Beltman. The outer AA belt also went right over my cell phone and an IWB holster (w/gun) and I still had an overlap of about 4". This seems contrary to those statements that AA belts runs small. And what is an adequte overlap anyway? I realize that you are supporting a holstered gun and lots of loaded mags in mag pouches, but with the velcro connection between the inner & outer, all that weight is being distributed around, pretty much, the whole circumference of the belt. Any of you hard case competitors out there have both an AA and a CR belt and are able to give me a valid comparison? Like: My pant size is XX, the AA belt is size ZZ and the CR belt is size YY and both the AA & CR belt give me X" of overlap. On a side note, my Blade Tech DOH came today. That is pretty slick. I have adjusted the cant to where I think I want it, and I note that the drop/offset attachment can just be eliminated and the tech-lok screwed directly to the holster - which I think would then give you a legal IDPA set-up if placed on your regular belt. Is that correct? Thanks for any input. Adios, Pizza Bob
-
1911 - please post pics
Hey, if autoxnyc's pictures didn't make you drool already, you've got no passion (or maybe salivary glands). He's got the bases covered: Brown, Wilson, Baer....who could want anything more?
-
Remington UMC 9mm 500 rounds $81.47 Free Shipping
Bet there's a former GM programmer, somewhere, looking for a job.
-
AR fustration
Then my money is still on the scope being the problem. Good luck.
-
hand gun permit extension
Sample letter.... Reason for needing a Permit to Purchase extension: It expired! That is all.
-
Gun-friendly eye doctor
This is really more in the optician's purview than your optometrist's or opthamologist's.
-
New Mossberg Plinkster 22LR and Nikon Scope in Real Tree
Nanotechnology!!!!!!!!!!!
-
AR fustration
That's two-thirds of the equation - unless the rail is monolithic with the receiver, make sure it is tight also. Is this a new Redfield scope, or an older one (before their acquisition by Leupold)? Adios, Pizza Bob
-
Florida CCW Changes
FL sends the renewal packet automatically. Print card and info form that is pre-filled with your info as originally submitted. If nothing has changed, sign and notarize form. Have prints taken (must be LEO and name & address of Dept. goes in the upper right corner of the reverse of the print card) and include a passport size photo, taken within the last 30 days, with you name and birthdate written on the back. Put it all in the supplied envelope and mail. Nice that it's seven years now. Adios, Pizza Bob
-
Purchases at Brick Armory
Good luck with that. They seem to subscribe to the rob Peter to pay Paul theory of cash flow management. Be interesting to see how many excuses they come up with for not being able to refund your money immediately. 1) Nobody here to sign the check 2) Not enough cash in the register today 3) Your gun is ordered and they won't let us cancel 4) Refunds are only given out on (insert any day but the one you are there) 5) The moon is in the seventh house Sorry for you trouble, but you should have lurked here a little longer and a little more comprehensively. Hope it all works out for you. Adios, Pizza Bob
-
Remington UMC 9mm 500 rounds $81.47 Free Shipping
Victory!!! After sending GM my documentation showing the discount applied, I got this in reply... Thank you for your quick response. I will be happy to assist you today. Unfortunately, the promotional offer of $20 off wasn't applied to your order because it wasn't valid on ammunition. I do apologize that the internet accepted this discount and for any inconveniences this may cause however; we are unable to honor it. If we can be of further assistance, please contact us. To which I responded... The fact that your order intake accepted the discount code is your problem, not mine. I only authorized $83.97 to be charged to my account. The fact that you made an error, shipped the goods in advance of notifying me (or of ever notifying me) of that error, and then charged an unauthorized amount on my charge account amounts to theft. You have until close of business today (5:00 PM EST) to credit my account for the discount. If that is not done I will dispute the fraudulent charge with my credit card company - and with written proof I don't think they'll buy the "we made an error so our customer has to pay for it" defense - and then notify both the on-line and bricks & mortar Better Business Bureau. It wasn't the "Internet" that accepted the discount, it was your company and you should have the integrity to stand behind it, error or not. To which they responded... Thank you for your e-mail. I am happy to help you with this. I am sorry for the price discrepancy on order XXXXXXX. Unfortunately, our system was experiencing technical difficulties the day this order was placed, hence the internet applied a $20 off on purchase of $100 or more discount to your order even though the ammunition purchased wasn't eligible to receive this discount. Since you were misinformed about this when placing the order, I have issued a credit of $20 back onto the card that you paid for the order with. I am sorry for all of the inconvenience this has caused you, and I want to let you know that you will be seeing this credit on your card in 3-5 business days at the latest. Again, thank you for contacting Gander Mountain and if you have any further questions please feel free to contact us. The little guy (OK, not so little) has to win one occasionally. Adios, Pizza Bob