Everything posted by Pizza Bob
-
Just got back from applying for permits
And therein lies the rub. Since renewal is discretionary, the issuing authority can set any criteria they desire. There is absolutely nothing the NJSP can do to change that situation, so save yourself the phone all and the embarrassment. Your local PD is fully within their rights to set any criteria. A talk to the chief may not hurt, but do not go into it thinking you have force of law on your side. Adios, Pizza Bob
-
Just got back from applying for permits
Bogus meter just went off the scale!
-
Internal Locks on S&W Revolvers
What he said. AFAIK, the lock has only been really problematic on lightweight, high recoiling guns.
-
What causes a bullet to tumble?
Flattened primers. Sticky extraction (kind of hard with a S/A, but if you get a bunch of FTE's could be an indicator).
-
2nd Gun - Pistol Permit Question
As has been pointed out, yes the process is the same, usually with the exception of fingerprinting. However, in leiu of fingerprinting your PD may want you to complete the yellow form, SBI-212A (non-criminal background check) and pay $18 with a USPS MO made out to NJSP SBI. That form is not available on line and must be obtained at your PD. You should use the same references that you used for your FPID application. Since it is fairly recent they may not contact them again. Good luck. Adios, Pizza Bob
-
What causes a bullet to tumble?
Let me just throw this into the mix: You may be over-crimping. The dimension you show should be OK, but it depends how far back on the case the crimp dimension extends. Remember, the 9mm case is slightly tapered - not straight-walled - so if the .377" crimp extends to where the base of the bullet falls within the case, you may have reduced the bearing surface of the bullet, causing it to yaw, which would destabilize the bullet once it clears the barrel. I saw this at a match I shot at a couple weeks ago, but in that instance it was obvious that was the problem. New reloader who figured if a little is good, more must be better. His rounds were so heavily crimped that it swaged the bullet to the point it looked like a heeled bullet for a .380/200. Just a thought. If nothing else, the above replies show there could be a myriad of things that cause what you are experiencing. Eliminate one variable at a time. Good luck. Adios, Pizza Bob
-
FYI
Just FYI - There was some negative feedback on Rayco Armory on the board here a little under a year ago. Not saying they haven't mended their ways, but you need to realize that one transaction does not a reputation make. Relate how you were treated but I would pull-up short of giving them a carte blanche recommendation based on your single experience. Just for your enlightenment... http://njgunforums.com/forum/index.php/topic/40154-i-know-im-right-help-me-prove-it/?hl=%26quot%3Brayco+armory%26quot%3B#entry533024 ...of course we are a pretty tough crowd. Enjoy your XD. Adios, Pizza Bob
-
Gun Shows This Weekend (6/22 & 6/23)
Well, I said that I had low expectations - and they were met. If you were in the market for anything but guns, the VF show was the way to go. OK, to be fair, there were some long guns there and a few handguns, and of those very few wheelguns. Just tons of knives. Every time I saw a table filled with flat display cases ahead of me, I figured that finally, some handguns - but more often then not it was cases and cases of knives. The only decent deal I saw was that two vendors, each had a Model 28-2 (N-frame, Highway Patrolman, .357 Mag), one 6" and one 4" and they were both under $600 - which in this day and age, isn't too bad. Lots of tacti-cool accessories and T-shirts and back packs, but pretty sparse on guns. Save your money or go to the Allentown show. JMHO Adios, Pizza Bob
-
Gun Shows This Weekend (6/22 & 6/23)
Try This.... https://maps.google.com/maps/ms?msid=212856953255321763063.0004dfb2bbb9c6edb2358&msa=0 Adios, Pizza Bob
-
USPSA @ OBRPC - 6/23/13
Looks like hard cover over most of the target allowing a head shot only
-
Gun Shows This Weekend (6/22 & 6/23)
Two shows over in PA. The first is the Eagle Arms Prod Show at the Roadway Inn in Allentown, PA. This is located on a service road (Bulldog Dr) that parallels, and is visible from, Rt 309N. When you see a large Ryder facility next to a Mack dealer - turn right at the Mack dealer and immediately right again. This is usually a good show, as are most of the Eagle Arms shows, but tends to be crowded and has very narrow aisles - not always the best thing on a summer day. The other show is the Valley Forge show, which, of course, is no longer in Valley Forge. It is in Warminster, PA at a Sports Complex, in a strip mall at the intersection of Rt 263 (York Rd) and Rt 132 (Street Rd) - just across from the high school. Valley Forge shows, when they were at the convention center, were the ne plus ultra of gun shows. Have not attended one since they moved to this facility. My expectations are pretty low since they are competing with the Eagle Arms Show - not so much for customers but vendors. For those that are considering their options, this show, as a bonus, has you in decent proximity to Tanner's, Classic Pistol and Surplus City (closest to Tanner's). I'm going to check out the VF show Saturday morning. Adios, Pizza Bob
-
Poll: Would you shoot Revo Div. USPSA with an 8 shot Revo?
Doh! I'm with you on this one, Alec.
-
Poll: Would you shoot Revo Div. USPSA with an 8 shot Revo?
The Rhino has piqued my curiosity, just not to the tune of $800 for something of unknown quality. While the Italians gave us Ferrari, they also gave us Fiat, whether the Rhino proves to be one or the other is yet to be determined. I like that they have a whole line of accessories for them - because, let's face it, where else are you going to get anything for a Rhino. They have a 9mm cylinder that you can swap into the .38/.357 gun and they also make a .40 S&W. Very neat concept. Adios, Pizza Bob
-
Another NJ Legal? Question... Mini-30
With no pistol grip you are GTG with the detachable mag and the flash hider.
-
Poll: Would you shoot Revo Div. USPSA with an 8 shot Revo?
Be careful what you wish for Nick... http://www.chiappafirearms.com/product/727/spec They also make kydex holsters to fit and moonclips. Ball's in your court. Adios, Pizza Bob<-----not rabid, just old
-
Today I shot a Fox
You ought to look into a Shiba Inu then.
-
Top 5 NJ Gun Laws You should know
Troy is right. You will never arrive at any kind of consensus when we can't even agree on whether something is a law or not. Case in point - loaded mags. There is no statute that says mags must be transported unloaded. If it is someone's opinion that they expose themselves to less risk by unloading them, that's fine - but that is their opinion, not law. Better to lock this now before it becomes even more of a vehicle for spreading misinformation. JMHO Adios, Pizza Bob IBTL
-
Maintaining a Fortified Structure?
...and you would have been correct, as I read the statute. It is booby traps or a fortified structure - but both only come into play when relevant to a place of manufacturing or distributing CDS's.
-
Other hobbies.
I collect contemporary SW Pueblo Pottery... Adios, Pizza Bob
-
Unofficial NJGF Burger Thread
Less than mediocre
-
Unofficial NJGF Burger Thread
Is that in Clearfield, PA??? 5 guys doesn't do it for me - as somebody said previously, just fancier fast food - but unless I can get a burger rare, it ain't a burger. I was really surprised at how good the burgers (and fries) are at Bobby's Burger Palace - a Bobby Flay chain. Opened one at Princeton Market Fair recently and they are very good. Dying to try a place called Sketch in Fishtown in Philly. Supposed to have the best burgers in Philly. Adios, Pizza Bob
-
FTF private handgun transaction question
Usually best to meet at a range, then you both (buyer / seller) qualify for the travel exemptions.
-
Bob's Little Sport Shop On Fire!
Generally a range fire is caused by unburnt/smoldering powder residue that is swept into the trap. Ranges that use shredded tires as "catch" material are particularly susceptible to range fires. Glad that all are OK. Bob & company are good people. Adios, Pizza Bob
-
AR15 Foregrips Legal?
A "pistol grip", one of the evil features, is defined as extending conspicuously below the action (emphasis mine). A forward grip is hardly conspicuously below the action - he's wrong. Nuff said. Adios, Pizza Bob
-
S&W 22A ... a good idea?
We'd be remiss if we didn't mention the most ubiquitous .22 semi-auto in the US - the Ruger Standard or Mark series.So many variations that there is literally something for everyone. Yes, they are a little tricky to take down and reassemble, but that can be remedied with either experience or the fitment of an aftermarket kit making the task easy. Barrel length has little affect on actual accuracy, but practical accuracy is usually enhanced by longer barrels. It's not the barrel, it is the increased sight radius that creates the enhancement. Handling characteristics may also dictate what barrel length works best for you - how does it balance? What can I hold steadier? Etc, etc. HTH Adios, Pizza Bob