Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Pew Pew Plates

NJGF Vendor
  • Joined

  • Last visited

Everything posted by Pew Pew Plates

  1. As I posted in the other thread, got room for one more tommorow, we are shooting BP revolvers indoors PM me if you want to join us
  2. 11AM, somerset county fish & game, Jersey Joe and I will be smoking out the range. Got room for one more if anyone wants to have a good 'ol black powder shoot out. If you dont have supplies (or a gun) you can use my stuff, at my cost of $2.75 per cylinder
  3. It was an experiment done to see if a chain fire from the front was possible. A cylinder was loaded like normal except grease and wad were left out, just a ball over powder. Black powder was poured over the upward facing cylinder (removed from the gun) and it was lit with a fuse. Numerous attempts did not fire any cylinders. .451 balls were also tried with same effect.
  4. Wads are actually more accurate too. You should never use any petroleum oil or grease at all on a black powder gun because the fouling turns it into tar. The whole point of the grease over the ball is not to reduce chance of chain fire (assuming you are using properly sized balls) but its to keep fouling soft. You may as well omit that step if you are using wheel bearing grease. Chain fires are from poor fitting caps. you can put black powder OVER the ball and nothing else and still wont get a chain fire (this has been done). If you are feeling extra cheap use crisco (natural)
  5. You need: .451 or .454 round balls (.454 is best) FFFg black powder Either wonder wads or natural grease #10 or #11 caps, depending on the nipples (#11 if you are not sure) You can just reimburse me for my supplies if you are missing something Make sure to have a nipple wrench for cleaning at home
  6. Ill probably hit the range this weekend in bridgewater. PM me if you want
  7. You wont be able to tell if a charge is 10% heavy by weighing the complete round, the brass alone has variations well over %10 what your powder would be. Thats .4 grains if you have a 4 grain charge. Brass is + - at least a grain
  8. Or a lee breech lock if you want to do precision reloading. Starter kits suck, and who is omega? Never heard of them...
  9. $359 + tax + NICS will get you a good- very good yugo m59/66 with sling, oil bottle, cleaning kit from JET Agent LLC
  10. My 700 SPS varmint in .308 loves hornady TAP, but loves handloads the most! From another board: "Yes the trajectory of the bullet is the same whether the scope is mounted high or mounted low- however that is true ONLY when that trajectory is measured relative to the direction the bore is pointing. If the bore, for instance is pointing up at a 30 degree angle the trajectory of the bullet relative to the bore direction will be the same as if the bore were parallel to the ground. However the trajectory of that bullet relative to the horizon will obviously be significantly different/ higher. For instance if you mounted a scope directly to the side of the bore, it would be pointing parallel relative to the target in the scope, and there would be zero angle between the two lines. However, to over emphaxize, let's now move that scope say a foot above the bore. There will then be a significant angle between the scope line of sight and the bore line of sight if they are both pointed at the same target at the same time. With the scope dead on the target, the bore will be pointing up, relative to the scope line of sight. It has to for them to come together at 100 yards say. In other words that bullet, when it hits the 100 yard target is moving upwards at a greater rate, than it would be had it been fired with the scope parallel to the bore."
  11. High rings mean 2 things. Bad cheek weld, and when you shoot at different distances your change in POI will change more the higher the scope is. You will not lose mechanical accuracy, but less cheek weld makes it harder to shoot, and the distance thing is just a PITA
  12. Whoah whoah woah, how dare you call your mosin junk lol. Lead-away cloths will effortlessly remove the cooked on fouling.
  13. Well, his name sure explains alot Perhaps its terminal effect is losing its jacket but in the barrel I can assure you its not shedding the jacket. The mild steel copper washed jackets are actually stronger than just copper. Also, none of the russian import ammo is steel core. And, if it was, a single seperated steel core bouncing down your barrel would trash it. Finding seperated jackets and saying the bullet is seperating in the bore is stupid. Its like saying "OMG I FOUND MY HOLLOW POINT EXPANDED, IT MUST HAVE DONE THAT IN THE BARREL!!1!!1!!one!!!!1" derp derp Every case I've read about in regards to a jackets seperating in a rifle results in the jacket staying in the bore and the gun going kaboom. Another reason that someones claim of them seperating regularly is silly. Another internet myth...
  14. One of the many things you test before purchasing a revolver is lockup. Alot of people do the test wrong and get incorrect results, but I will explain the right way. Check to make sure pistol is unloaded. Cock hammer back, and while holding trigger down ease the hammer foward. NEVER LET GO OF THE TRIGGER (this is the critical part!) now grab with your other hand the cylinder and wiggle it front to back and side to side. The tighter the better. How much is too much? Thats for you to decide. There are used revolvers out there that lock up so well that you cant feel ANY movement. (very good!) https://docs.google.com/viewer?a=v&pid=explorer&chrome=true&srcid=0B6Fh3F6hufhDMWZiNjBkMWItZDhkNS00MTlhLWE4YzMtOTdmN2YwNmY4NzM2&hl=en_US
  15. For brass, if you scrap it 5.56 brass is about 2 cents/case. If you sell it, you can get upwards up 6 cents/case depending on headstamp/ how segregated it is
  16. Anybody here shoot cap & ball revolvers? Heres my new "front-stuffer", a Uberti 1858 remington, cant wait till I shoot it indoors
  17. I have a 6" K38, a 8-3/8" 500, and a 8" 1858, and all 3 balance very nicely for me. You should hold both before coming to the conclusion of longer is a worse balancing gun. The weight if anything keeps it steady. You will shoot a 6" better
  18. S&W>Ruger>Taurus Do you plan on concealing? If not, why 4"? 6" gets you a longer sight radius which = more accuracy, and the weight makes recoil softer and less flippy
  19. Thats fugly. I would rather have a true AR, and thats saying ALOT!
  20. S&W is still 100% made in the USA. Older smiths dont have locks, have forged parts, and have pinned barrels (depending on the vintage) which are all desirable traits
  21. "You can go down to a gun show at the local convention center and come away with a fully automatic assault rifle, without a background check, and most likely, without having to show an identification card. So what are you waiting for?”" Where do I get one of these legal fully automatic assault rifles so easily? I WANT ONE!

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.