Everything posted by autoxnyc
-
Surefire Muzzle Brake on M6A3
Supposedly one of the best according to this 8-) http://www.m4carbine.net/showthread.php?t=12503
-
Surefire Muzzle Brake on M6A3
No first hand experience but from what I have seen the PWS FSC 556 actually cuts down flash better than most other flash suppressors but is not classified as such so it's NJ legal. It also serves as a muzzle brake. FNH is shipping civilian SCAPs with that device so it can't be too shabby. http://www.skdtac.com/PWS_FSC556_Flash_ ... ws.103.htm
-
My New M1 Garand - Courtesy of the CMP
Federal American Eagle makes a load that's similar to M2 and is safe to use in the Garand: http://www.federalpremium.com/promotion ... &year=2009
-
My New M1 Garand - Courtesy of the CMP
+1 on that idea. Since we won't see summer any time soon around here. I built a "stock oven" by mounting a heat lamp from Home Depot on a 2x4 and put that in a large aluminum garbage can. It got tons of cosmoline out of my Czeck VZ24 Mauser.
-
What's a good place online to buy RRA stuff
Thank you. Question #2. I see RRA lowers has word "LAR-15" machined on it. Just want to make sure it's NJ compliant. I heard it can't say AR-15 on the receiver in NJ. :roll:
-
What's a good place online to buy RRA stuff
I'm looking for a RRA NM lower, anyone have any recommendations to a good place to get those?
-
My New M1 Garand - Courtesy of the CMP
Very nice! Are those Garands from CMP all matching?
-
Sten MKIII
:shock: Did your friend have to go to trial? Or was it resolved before that?
-
AK in NJ
Thanks for the advice on Henderson Defense. Which FFL did you guys use to do the transfer? I'm afraid a lot of them won't touch something like that 8-) I called BH and they told me to check with State Police to make sure.
-
Optics Planet Sale
Thanks for the link. Do you know if the eyepiece on the angled version also twist? e.g. Can I have it angle side ways instead of upwards only?
-
AK in NJ
Great. Thanks for the info, this is definitely an option I will consider. I was just reading up on this step by step guide here http://www.cross-conn.com/Saiga_Conversion/index.htm and I get a general idea on what needs to be done. Good point on magazine options, there's no need for me to convert to AK ones if Saiga mags work reliably. If I do decide to go that route I definitely will have questions for you
-
AK in NJ
I think we're talking about the same WASR THE ORIGINAL WASR-10 HI-CAP ROMANIAN AK RIFLE WE HAVE SOLD MORE UNITS OF THIS AK RIFLE OVER THE YEARS ...... BEST VALUE ON THE MARKET FOR AN ENTRY LEVEL HIGH QUALITY AK RIFLE. RIFLE COMES COMPLETE WITH 1-30 ROUND MAG, SLING, CLEANING KIT, OILER, AND MANUAL. DON'T MISS THIS GREAT DEAL ITEM # ROM-AK...$379.95 I live in West Orange, 15 min west of Newark. I want to find an FFL willing to deal with AKs but won't rob me on the transfer fee either
-
AK in NJ
I am pretty proficient when it comes to anything mechanical that doesn't involve welding/fabrication. I detail stripped my Glocks, Sigs, Berettas to perform my own trigger job and even alter the creep and over travel. I took a look at Saigas on the net and they look a lot different than the Romanian AKs. I want a "normal" looking AK, e.g. wood stock/handguard. So I was under the impression they need more work to convert back to that state. Some other place also mentioned they have a transfer bar designed to be used on conventional rifle stocks, additionally the mag well needs to be converted to use normal AK mags? So I was just wondering if it's worth it to go that route. thanks, Daniel you can do what you wish.. but there is a reason the AK platform has been handed out to countless armies, and grunts across the world.. the weapon is EXTREMELY easy to work with, and really can be fully built modified etc.. with the most basic of tools.. also this would net you a very reliable firearm and a bunch of knowledge in the bargain.. ive worked on cars and stuff for a long time but didnt know anything about firearms really.. and the Saiga was my first rifle.. having NEVER worked on a firearm before in my life.. having NEVER fired the Saiga i just purchased.. it was apart and in pieces that night.. lol it was really fun to build and taught me everything i could ever hope to know about how the AK platform works.. as far as a WASR goes.. some praise them.. some hate them.. some complain of issues.. but i can say this.. my Saiga has had zero malfunction..
-
AK in NJ
Wow, a lot of useful info here. I prefer not to build one since I don't have a lot of experience with AKs yet and rather buy it as is to avoid any potential issues with NJ law. So the WASR 10 high capacity(double stack) on classicarms.us site is legal in NJ as long as the mag capacity is not exceeded? Does anyone know any AK friendly FFL transferers in NNJ? thanks!
-
AK in NJ
Thanks guys. So if I want to get a double stack AK. Where can I find a dealer who's willing to sell it to someone in NJ? Do they even make 10 - 15 rd double stack AK mags?
-
AK in NJ
OK, apparently I have heard mixed stories about legality of AKs in NJ. Since some of the board members own them I am assuming some variations of it is legal. I read through the threads here but I'm still a bit confused as to what constitutes a legal AK. Is it similar to ARs? No bayonet lug, flash hider, collapsible stock, and it's name stamped anywhere? Sounds like the WASR 10 low cap version from classicarms.us is legal. thanks in advance. - Daniel
-
FFL FEES
The FFL I now use in North Jersey area is Constitution Arms. He does transfers by appointment only and I highly recommend him. Transfer fee is: 1st firearm $65(including NICs) additional firearms $25 each (973) 378-8011 http://www.constitutionarms.com
-
We need a google map pinned with all NJ gun shops and ranges
Here's a great FFL I use to do all my transfers in Northern NJ: Constitution Arms 12 Hoffman Street Maplewood, NJ 07040 phone: (973)378-8011 http://www.constitutionarms.com/
-
AR pics, lets see'um!
Very nice. Question, I want to get a PWS brake too, where do you get it perm attached here in Jersey? Or is there a recommended place I can send my upper in to have it done? thanks! - Daniel
-
would not want to be that guy...
The description of the video says 2 bullets in the tube, I assume the first bullet didn't completely exit the barrel and the second one was fired while the first bullet is still in the barrel? I have a Keltec sub2000 that came with a bullet stuck near the throat when I bought it. I didn't examine the gun for a while since I assume new guns wouldn't have any issues. Good thing I cleaned it before firing it otherwise I would have missed the bullet and it probably could have blew up on me. That thing doesn't like Wolf and reloads at all, I assume it likes hotter loads. I have since given up on that gun
-
Where can I find schedule for gun shows near NJ/PA?
I want to get an all matching K98. Will I be able to find one at one of these shows? Is there a listing for large gun shows in the Eastern PA area? thanks! Daniel
-
Any chance the FNH SCAR 16s will be available in NJ?
I like the SCAR since it seems to be the only reputable gas piston option with a chrome lined barrel, LWRC and POF were the other ones I looked into. AFAIK they don't have chrome lined chamber/barrel. As far as the muzzle device is concerned. on GB most SCAR 16s comes with a PWC brake: http://www.gunblast.com/FN-SCAR.htm http://www.gunbroker.com/Auction/ViewIt ... =154197177
-
SIG P239 - who has one?
Sig is coming out with E2 models for the 226 and 228/9 family. Basically a thinner/smaller grip and enhanced decock lever and slide release. You can retrofit the new grip to older guns but you'll have to change out the hammer strut, main spring and main spring seat. You might also want to try a short trigger before buying a new gun. http://pistol-training.com/archives/2416#comments
-
Any chance the FNH SCAR 16s will be available in NJ?
I love the idea of a gas piston rifle. The SCAR seems to be an awesome gun. It seems to me the compensator/hider on it is classified as a muzzle brake. The only "evil" feature I guess is the folding stock.
-
figured out the 30 day period.
Wow, what if you get a defective gun and wanted to exchange for another? I really hope they get rid of this stupid restriction.