Everything posted by Shane45
-
I grow tired of forums....
:naughty:
-
I grow tired of forums....
Next time you buy ammo, pick up a box of decent 45 and you can shoot it when our paths cross.
-
NJGF Arms Race 2010
I'll have to check my records but Im pretty sure the following are both post start date: TDI Kriss DTA SRS
-
I grow tired of forums....
"And there is stuff you don't know that you don't know." That is a truism right there!!!
-
I grow tired of forums....
Ray Ray, not sure where this is coming from... "So, your assuming that I act like I know it all and I have been shooting wrong all this time. Couldn't be farther from the truth Shane. " My post adressed to you was on your comment of general youth today and directed at same. It seems you have taken that comment and applied it to yourself personally..... The excerpt of how long you have been shooting correctly actually in my mind was directed at the old crumudgeon at the range that says things like "Cocked and locked is dangerous, you should carry that 1911 hammer down". It doesnt matter that they have done it wrong for more years than I have been alive. Wrong is wrong. So the new shooter thats only been shooting a year but went to Thunder Ranch and has been doing it right for a year trumps a lifetime of wrong. Again the point was time behind a trigger doing it wrong is irrelevant. Time behind a trigger doing it right is relavent. Follow me? At no time was I speaking about you directly. (except in the other thread about serial numbers .
-
I grow tired of forums....
OK a couple white nuckle blasts into the triple digits on the Busa. I feel better now :twisted:
-
Range Nerds!
Maybe were not range nerds, were range geeks? In todays generation Geek is good right?
-
I grow tired of forums....
Sigh.... Im going to get up from the PC and go give the Busa a workout! Its been a long week!
-
I grow tired of forums....
Ray Ray I understand what you are saying but.... pedantery knowledge is one thing. Real world is another. Ill give you an example watered WAAAY down for brevity. Guy a has forged by his own hand metal for many years. Guy b, MIT grad engineering degree in hand. This part needs to be made this way for this project. Guy a, no it will break. Guy b my books say it wont. OK we do it both ways and see. When guy b's part breaks he asks guy a how he knew. Experience from doing that you can only gain from doing!!! It cant be found in the book! This is a true story. Length of time shooting is iirelavent. Length of time shooting correctly is relevant. I do not care who listens to me. I offer my advice freely as a mutual student. Take it or leave it. But all the wanna be's are silencing the efforts of those that know with their incessant arguing and poor manners. An example of what Im talking about. A budding machinist student fresh out of high school in trade school taking a world renowned rifle builder to task because his book at school said something different than what the builder was doing. A new shooter taking to task a seniour trainer at Rifles only about what a waste top shelf equipment is. A new shooter (I shit you not) quoting his XBox tactical experience as it relates to real world and why his way is better. (Arguing with what I happen to know was a real deal D-Boy) A new shooter quoting his paintball experience as it relates to real world. Again, nothing new but its becoming a flood instead of the few annoying instances. Perhaps its the way its gone about. They do not approach it from, I learned this, could you explain that. Its a rude argument right out of the gate! This is what I dont understand! Followed by a chime in from the same kind.
-
I grow tired of forums....
Let me clarify, I did not mean this forum specifically, I meant forums in general. I also did not mean me specifically. I am really talking about the top shelf guys that lead the way in training or manufacturing or have simply been there done that with real world operational experience. I merely talked about myself to make the point that I at least know the difference between those that know and I would trust their teachings and the "other" kind.... and maybe to make the point of being a student.
-
Range Nerds!
Ray Ray, when you shoot more than 1 box in a session youll understand. Also, when you unroll a rubber the entire way theres a serial number there. I know you have never seem it but again, those of us that do understand why
-
I grow tired of forums....
Im seriously considering taking a break from all the forums. I love forums. I have learned a ton from interactions on the forums. But it just seems as of late there is an entire influx into the forums of new shooters with tude! I grow weary of those that in 1 month went from their bipod mounted backwards to internet expert. This new crowd just seems to miss the entire, learn from those that know piece of the puzzle and will argue to infinity because of all their real world XBox experience! Its easy to ignore. Its not easy to ignore when its a flood! Understand I make no claim to be anything but a forever student of shooting. But I have been at it a looooong time and have been fortunate enought to be exposed to a lot of top shelf guys that didnt mind passing along info to me. When I learn, I keep my mouth shut and my ears open. When I have a nugget of information that has worked well for me and someone asks, I freely pass it along. If I dont know or I'm not very certain of the topic, ISTFU. It almost seems its a self esteem issue for some. They want to be known as the tactical guru so much so that they try and become instant expert. I cant believe some of the advice I see fly from these types. Its just crazy! In the end it really hurts the forums I have seen a number of forums shed the true experts willing to help because of the keyboard commando's. This is nothing new. What is a bit different now though is the new level of stupidity I see in the arguments. No logic to be found anywhere. An expert states wisdom and a group of F-Tards argue nonsense based on nonsense. None will admit actually seeing they were wrong... they just argue until they win which in actuality is a loss becaue the guy that really knew just said f-it I get better things to do..... Wheres my shut up and shoot T-Shirt? rant over, now back to your daily scheduled programming.....
-
CCWing a Bersa Thunder .380
A Bersa on hand vs a Glock home in the drawer wins every time. With that being said, I just dont think I could rely on .380. I took my buddy shooting with his Para 40 and his Bersa .380. I brought along some steel plates to shoot at. They are free standing. Well his Para was jamming to much so he switched to the Bersa. He shot the steel plates with his 40 and they went over with authority as they did from my 45 but when he hit it with the Bersa .380, well it gave a pling but couldnt even nock the free standing plate over.... not exactly confidence inspiring. Now if anyone comes across 4 1" thick 8" wide circle plates that look like they were cut out of the side of a battle ship (Im told they were) let me know someone stole them!
-
This family will survive the zombie apocalypse...
Luck favors the prepared!
-
Looking for a new, NEW rifle... suggestions welcome.
Axeman, if your interested in my DSA drop me a line.....Ill make you a package deal.
-
Is a DL required by law when a FFL receives from nonFFL?
I have seen this many times. I know of no law but it is SOOOO common. Half the midwest has my DL by now LOL.
-
Looking for a new, NEW rifle... suggestions welcome.
Yes. I have a gen one DSA SA58C, early production and one of the very first in NJ. I had all my ducks lined up. DSA and the state were in agreement that its legal. It shipped. Then at 11:59 some "questions" popped up so it sat for a bit. Then was approved and released to me.
-
AR Bolts
I know DPMS had some real issues with bolt seperation at the cam hole. Ive never had that happen. I like Young Manufacturing BCG's.
-
The difference between an AIMPOINT clone, and the real thing
bbk an excellent point!!! If my budget came down to training or an optic.... training it is. I am often asked why I dont do night sites on my 1911's. I always answer the following (not trying to start a side debate :hand: ) If It is that dark, can I ID my target well enough to even take the shot? I also feel they may impede me as I waste time searching for the site instead of breaking the emergency shot. I rely on some training excercises and muscle memory instead. Here is the example I cite. I was shooting an open class pistol in IPSC. Shooter ready, stand by....beep. Draw, aim, CRAP NO RED DOT!!! Well, the 30mm tube was enough of a ghost ring and my muscle mem to complete the course of fire with no mikes!!! How I trained. From every wacky position I spent a great deal of time doing the following. Pick an object. Close my eyes. Draw and aim. Open my eyes, am I on? No, do it again! It surely boils down to your level of comitment. Mine is not as high as I would like it to be. The goal is to train with good equipment. And here again is the sound of dead horse flesh getting beat, how good is your training if your being distracted with failing or non performing products? If you spent $1000 on a training class, 400 on travel, 500 in ammo, whats the siginificance of another 250 to get the right optic so that its not wasted or hampered if your 50 dollar optic fails during class?
-
The difference between an AIMPOINT clone, and the real thing
Holly shit guys, do you not follow any major events??? You may not want to survive the appocolypse but Id sure like to be able to survive say...Katrina! Theres only about 1000 stories out of that event on those that were armed were able to remain unscathed. Luck favors the prepared. Do I feel the need to go to the extremes mentioned above. No. But do I want to make sure I have equipment good enough to get me out of dodge in an event, damn right! How many times do you see violence on the news in the supermarket every time its going to snow for 3 days and people get nuts? After 9-11 is it really hard to invision a catastrophe in our area? I had several friends doing PSD work in Katrina and I can tell you the stories that never made the news were absolutely horrifying. Think gang rapes and stuffing the teen body in the fridge.... Consider what forms your opinion on whats good enough for what you want. Spend 50 bucks for the convenience of using a red dot at the range and dont care if it fails. Have at it. I DO IT. But theres no clone on my guns I would rely on if I found I needed to. If you shot 150 rounds under it and called it good for goto.... I would suggest talking to some shoot school instructors. They see what regulerly fails at a much higher rate than the rest of us. See below for an example. Price point. Man every post the cost seems to go up up and away! Hell would you guys like me to do an aimpoint group buy or what. I can not post the price publically but it would be WAAAAY below what has been posted here! If you watch other boards I see lightly used aimpoints frequently for around 500 bucks. Thats pretty far off from $1000. Im not sure who the Rambo comments and the berating comments are directed at. I havent really seen either in this thread. Do your own research. Go pop aimpoint verses clone in google. Go read the threads. They seem to all end up the same way. I bought, I replaced, I boudght I replaced, then I learned and bought the real thing. Maks, when it comes to scopes (magnified) the arena changes quite a bit. The needs vs price point opens up greatly. And there is a threshold of diminished returns. Where some of us get pinched is when you need a specific series of requirements. If you need a quality reliable optic that is FFP Mil/Mil with enough travel you find yourself stuck in S&B, PH, Hendsholt, US Optics land. I had a Nikon tactical. Its a great scope. Rugged, reliable etc etc but it only comes in MOA and SFP. You can get an IOR MIL/MIL FFP but thats still a 1600 optic. This is set to change when Vortex Optics releases their PST line. There is one other option from SWFA but... odd magnification (3X9) hold it up for me. Now if you dont need variable mag or dont need mil mil or FFP the arena opens up considerably and gives you MANY more good quality optics at much lower price points. Now that my brain is stuck in metric land I need to either get another S&B or wait for a lower cost but good enough alternative. Im still waiating.... and my GAP AR10 is still without glass. My lifes experience. I learned long ago that the addage you get what you pay for is pretty spot on. And usually for the same reason. I always buy the best I can afford because when I dont it usually ends up in failure, frustration, repurchase, unintended consequences... all bad. So I buy the best I can within reason. For example Craftsman tools are good enough, I dont need snap on. But when it came to my Milling machine Vices and machine tooling... well I spent big money there because its worth it. The end result is obvious in the quality of the part that results and the lack of headaches associated with lesser quality tools. Here is an excerpt of a post from 2003 from Pat Rogers to me illustrating what I am talking about with what trainers see. Hi Shane, Mr. Rogers was my Dad- my name is Pat. No, no specific string of fire. The issue of malfunctions/ parts failure is directly related to use. The average Joe does not normally subject the gun to hard use. That is, he may take the gun out to a range where only shooting from a bench is permitted- no rapid fire etc. It is not necessarily the total number of rounds fired, but often the number of rounds fired in a compressed time frame. This is another reason why attending a formal class of instruction is necessary. Shooting 500 rounds over the course of 6 months isn't the same as shooting 500 rounds in a day under supervision. We often have shooters who bring guns that won't function on Day 1. They will claim that the guns worked fine yesterday (or last week) but they won't today, and i'm sure they are being truthful. Parts wear, break and otherwise fail, and while some is normal, a lot is due to inferior quality on the manufacturing end. I don't want a light duty anything. I want something that works under all circumstances (given normal PM). The individual has to decide the cost/reliability thing. If you don't want/ need something for other than casual plinking or admiring it in the safe, anything will do. It's just that you shouldn't expect a Frankengun to actually perform under circumstance of hard use for any length of time. Someone asked about the Wilson AR. I have seen only one at Gunsite, and it performed admirably. Of course it was used by a retired LtCol of Marines who is now a civilian contractor still in the business, so i would expect no less. Re brands. Anyone is capable of of turning out great stuff or garbage. Consistency is the key. Some makers are very consistent (one way or the other) and some fluctuate wildly. People will fall in love with a name or individual piece of equipment often because it is what they bought and they hate to think that they are wrong. There is no perfection in manufacturing (regardless of hype). Mistakes happen. But you have to remember that consistency is the key. I get to see a lot of rounds fired down range from a lot of different guns. I'll base my opinions on my experience, and i'll stand by that.
-
The difference between an AIMPOINT clone, and the real thing
Hehe . Thanks for the compliment!
-
The difference between an AIMPOINT clone, and the real thing
Quoted from my first post in this thread: "I can understand it on non go to's or range only's but make sure you have a real one on your goto." In regards to all 3, where were you, Mercury? And two years is just my time table its actually good for like 5. 50,000 hours. And as good as I think aimpoints are....Chad you did see the mount I make and why right? viewtopic.php?f=37&t=5620
-
The difference between an AIMPOINT clone, and the real thing
Chad if you were having trouble seeing the dot in daylight with an aimpoint... there was something wrong with it!
-
The difference between an AIMPOINT clone, and the real thing
You get what you pay for..... If cheap shit that fails doesnt frustrate you or waste your time or possibly cost you your life, by all means have at it. Echo if you think cheap RDS's dont fail, I suggest you do a little research. I stopped counting long ago on the failures I hear about. And the replacements that fail and the replacement for the replacements...... Hit around the $200 mark and it gets a fair amount better. But now its not so easy to just replace it. Treat it rough once and that might be it. The Aimpoint on my AR right now has done three tours at SHOT show being droped, banged and finger f'ed to death, been on an IAR tested by the Marine Corps, and a number of reguler old fashioned range sessions and she still operates like the day I got it. Take ANY cheap RDS and do me a favor, leave it on for seven hours. Does it still work or is the battery dead? I can leave my aimpoint ON for oh about TWO YEARS before I need to change the battery. Crossing a stream, bobble and dip your weapon in the water for a second. Does it still work? The aimpoint is divable to 7 meters IIRC. Im not here to ram expensive optics down anyones throat but I have played with a lot, RDS in particuler. I see the value.
-
The difference between an AIMPOINT clone, and the real thing
i can get you a T1 for a good deal better than your quoting an H1 for. I bet all those Korean shop owners that ended up on their rooftops with their AR's defending their property and likely their life during the riots never expected to be there either I am obviously from the buy once cry once camp. I have no problem paying equal or even more than the price of the firearm for the optic. The scope on my rifle was $3300 without mount. If it were on a stock LTR it would be more than 4 times the firearm value...and I would be fine with that. If my Acog was on my bushmaster that would be even money. You really have to realise and think about what an optic is asked to do on a firearm without failure...its a lot! I buy and sell a lot of guns...but not my optics that have proven themselves to me. Buy once. Cry once. Train with it. Hope and pray you never need it.