Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Parker

Members
  • Joined

  • Last visited

Everything posted by Parker

  1. Aluminum and brass are still softer than steel. Muzzle crowns wore out more from steel cleaning rods than the jags pushed by them. Maybe you can make something for your AK74 like I did for my M1A's muzzle? Since I have to clean the barrel from the muzzle, I made myself a simple bore guide. I took an empty 12 ga. shell, knocked out the primer, and drilled an opening slight enough to fit my .30 cal. Dewey rod through. Slip the empty hull over the muzzle's flash hider as it will be a snug fit and because of such stays in place. Hulls like the Rem. Premier or compression-formed Winchester AA hulls have a tapered diameter on the inner walls so as they slip on they form a tight self-centering fit. I think it works great for my application. You may have to trial and error some scenarios to see if you can work something for yours.
  2. I missed the part about the sawed-off shotguns. However, yours is a poor pattern at 15 yds. with a CYL bore. Were you using cheap loads or premium target loads? This fellow's backside doesn't have a core concentration of pellets. And he fits rather well within the uniform spread too. "Just yesterday I witnessed a 24" spread with #4 shot out of a 26" barrel with IC choke at 10 yards." It's common knowledge that #4's are the threshold shot size (and larger) where most shotguns show more variances and sometimes poorer patterns from gun to gun.
  3. Not that I'd condone birdshot for home defense, but based on the pattern density, I'll bet the distance he was hit was at least 25-30 yds. And I'm guessing a southernly hit on a fleeing northbound man. Typical patterns of any small shot could be as small as 3 inches to as large are 12 inches at ten yards depending upon choke. My grandfather carried about sixty #6 pellets in his right leg for 42 years before he died. The doctor never removed them. My Uncle Baldassare, my Grandpa's brother-in-law, shot him while rabbit hunting back in the 40's.
  4. As I get older, I use the 12's less and less frequently. I like carrying and shooting the 20's & 16's. I lean most to my 20's, then the 16 gauge late-season. A couple of 12's will get out for a nostalgic romp now and then. A double with its combination of choke offerings loaded with different shot sizes in each barrel makes for an effective tool.
  5. Parker replied to AntZ's topic in Rifles
    The forward mount position is designed there for those "scouty" reasons, but its receiver is still configured for integral Ruger scope mounts like all Ruger's should you decide to mount a scope the conventional way. Scout features
  6. 7.5's are okay provided your shots are close and extend to 30-35 yds. Some folks like 6's, some like 5's better. (Out West the preferred load for long shots on wild birds is #4's.) A lot depends on whether you are hunting by yourself or with a dog and what style of dog. For example, a pointing dog that holds point may offer you shots that are close and you can down open-field pheasants with #8's and an open-choked skeet gun. But that's not the optimum load or setup. A flushing dog like a Lab or Springer would typically offer shot presentations a little farther out, but not always. If you are just out beating the brush by yourself or with a friend you will get opportunities at both long and short distances, so best to have a load and choke that will cover all bases. You can't go wrong with #6's. They offer enough penetration at distance and enough shot in 12 ga. loadings to ensure pattern density even at distance. Best all-around 12 ga. loading is 1 1/4 oz. of hard #6's mated with an IC choke. Switch to a MOD choke late season as temps get colder and covers get sparse. It is not uncommon for folks who hunt with pumps or semi-auto's to have a #7.5 in the chamber, followed by a #6 and #5 in the magazine.
  7. A limit on # of pheasants or number of shells? (You are also limited to certain shot sizes as well.) These three links may help: http://www.state.nj.us/dep/fgw/pdf/2010/smgame_summary10-11.pdf http://www.state.nj.us/dep/fgw/pdf/2010/dighnt56-68.pdf http://www.state.nj.us/dep/fgw/pheasart.htm
  8. That mount does look a tad high for my tastes. I would prefer it lower, only because I like a firm cheek weld. (Note: Serious clay target shotgunners make such a fuss over proper gun fit, wanting the right measurements for LOP, DAH, DAC, negative or positive pitch, cast on or off, etc. All this for a weapon that is merely shouldered and pointed; not aimed. Yet rifleman commit a cardinal sin by not making the most of properly fitting their dimensions to a rifle stock relative to how sights are configured. One size does not fit all. For a weapon that must be precisely aimed, fit demands more attention. If "fit" is defined as something as simple to pursue as sight height, then so be it.) There are advantages and disadvantages to a low scope mount vs. a high scope mount. The shooter needs to weigh what characteristics they desire. High scope mounts on precision rifles coupled with ultra flat shooting cartridges at long distances have been in vogue and high mounts help to accommodate clearance for large objective bells as well. However, it is still preferable to get a proper cheek weld on the comb so you need to find the right balance. You can confirm whether a high scope mount increases the "point blank" range of your round by taking your pet load, go to a ballistic calculator (I.E. http://www.hornady.com/ballistics-resource/ballistics-calculator), and plug in the known variables. Alter the "sight height" parameter in inches incrementally and see how the trajectory impacts change at various ranges as sight height increases. These two images should bring some clarity to what's going on. Line of sight depicting near-zero and far-zero impact, line of departure and trajectory: Another image depicting line of sight, near-zero impact and far-zero impact relative to scope height: Good article by John Barsness explaining the pro's and con's of each: http://www.opticstalk.com/scope-mount-height_topic18514.html
  9. Nice Ruger, but from the pictures it appears your rear sight's crosspin is drifting out of the frame and needs to be tapped back in place before it gets lost.
  10. Endshake or cylinder play is another area to look for in a revolver to see if it's worn. Consequently, you should also look for a tight barrel-cylinder gap. I never bought a revolver unless I had a feeler gauge in my pocket to measure the gap.
  11. No problem.
  12. Here's a link to Sporting Shot's online magazine for anyone who may be interested. It's from the publishers of Shooting Sportsman. Some nice pictures of fine custom engraving on classic shotguns, a restoration segment about a Winchester M21, good article on Hevi-Shot by noted ballistician Tom Roster. (Somewhere in the magazine is a link where you can sign up to receive the next copy free to your email.) Enjoy! Sporting Shot
  13. I will offer the same opinion as others. Try the factory irons first. Keep in mind the scope mounts offered out there (I.E. Sadlak, Bassett, etc.) mount the scope high over the bore and also aid to provide adequate ejection clearance. The factory comb/heel of the SA wood or composite stock is optimized for iron sights with a proper cheek weld for most people. The fact that some of the scope mounts out there offer sight-thru channels underneath the rings to allow use of the original front post/rear peep indicate that two different positions or cheek welds need to be attained to use one or the other. A temporary comb for raising your face/eye to see through the scope will be necessary, unless you like sighting down the rifle with a chin rest. some examples:
  14. First, some background: The 3.5" 12 ga.probably would never have evolved had it not been for the lead shot ban for waterfowling in the U.S. in 1991. Now mandated to use steel shot for all waterfowl, hunters had to adjust to the limitations of steel vs. lead. Many waterfowlers were handily using 2 3/4" & 3" lead shotshells in 20, 16 & 12 gauges at that time and it was more than adequate given the right situations. The 870 has been around since 1950, and the 870 Magnum has been offered with 3" chambers in 12 ga. since 1955. Many waterfowlers (goose hunters in particular) were using the 10 ga. for years with lead because of its bigger payload and the switch to steel with the big 3.5" shell was a struggle with early loads but still better than some early 12 ga. offerings. Load development and the evolution with steel and other non-toxics has progressed in the last twenty years. The 3.5" 12 ga. shell evolved with the demand to accommodate bigger steel payloads. But with steel shot, unless the 12 ga. bore is slightly overbored to account for the big payload, the 10 ga. with it's larger bore will usually pattern better, offer less pressure, less recoil, and usually with the shotgun being heavier, is the more comfortable shotgun to shoot. It's no surprise 12 ga. gas-auto's as waterfowl guns are a hot ticket today. As with most things in life, size or "going big" does not always make up for inability or lack of skill. A 3.5" load of 00 buckshot (18 pellets, twice the load of a standard 00-buck 9 pellet load) in an 8 lb. shotgun will deliver about 50 ft./lbs. recoil energy to your shoulder. That's approaching 458 Win. Mag. territory. Ouch! http://www.chuckhawks.com/recoil_table.htm Shotgun Recoil Calculator Do you need a 3.5" SuperMag? Unless you waterfowl hunt A LOT, I would say no. 3" chambers are more than adequate. As for the 887, my nod would be for the proven 870 over the 887. But I can't formulate an honest opinion on the 887 as I've never shot one.[
  15. Yes, the pump and semi-auto are made in Turkey by Sila Sanayi A.S. (formerly Vursan) http://www.vursan.com.tr/index_en.htm
  16. Stoeger is simply the importer of the shotguns. Their O/U's and SxS's are all made by E.R. Amantino out of Brazil. They are not a low-end Benelli. http://www.eramantino.com.br/eramantino/index.php?id=en And I'm pretty sure Beretta owns all these brands: Benelli, Sako, Stoeger, Uberti, Franchi & Tikka. There is a marked difference between a $350 shotgun and a $3,500 shotgun. Besides hand-fitment, quality of walnut, quality of parts, hand-checkering and wood and metal finish that goes into assembling the higher-end shotgun; my money is also on the higher-end gun for lasting longer. Every gun has its idiosyncrasies, but some by the nature of their construction and low-quality of parts are simply prone to more problems. As an example of such idiosyncrasies; Citori O/U's, based on the Superposed design, are prone to the lower firing pin delivering weak strikes or the firing pin tip wearing prematurely due to the use of hard primers. But this problem creeps up after about 100,000 rounds fired. Does that make the Citori a bad or cheap shotgun? Not at all. Is there a reason why Miroku (the Japanese maker of Citori's, imported by Browning) began making their frames with bushed firing pins on their shotguns that were sold in the European market? I'm sure there was a reason. Is the Stoeger a good value? Sure it is for the price for a new S/S. That's an easy decision to make, but when it comes to shotguns, you do get what you pay for. Will a Stoeger last for 100,000 rounds before any premature breakages? I dunno. There are better time-proven designs and some of the older shotguns that are still around are still here for a reason.
  17. Don't see too many Scout's these days. They are a handy size too.
  18. I suspect because it's in proximity to Xanadu-nuttin, where Cabela's was supposed to hang their hat. But after waiting more than half a decade, Cabela's opted to pull out since that place is still in limbo. 35 miles south seems an opportune location for BPS but I do feel for the little guy. Someone always loses in this arrangement.
  19. If you cut the barrels and a new muzzle is exposed, you will need to soft solder the gap closed as there will be one between the barrels and the upper rib and bottom rib. Depending on the strength and quality of the gun, the ribs can come loose over time with shooting and leaving the end unfinished will lead to such.
  20. These were made by Crescent Firearms in CT. "Action is loose upon lockup" means it could loosen over time with more rounds fired. It will fire, but you may have escaping gas, etc. It's probably not worth the effort or money to repair, for the repair could probably cost more than what you invested to purchase the shotgun. If it were a family heirloom and had sentimental value, then it might be worth fixing. These were private label house brand guns and were not known for their sturdiness like other American doubles. A loose A.H. Fox is worth repairing, but not necessarily a Crescent. Keep looking!
  21. How about used? Stevens/Springfield 311's are good stout American-made doubles that can be found for as little as $175 to a high of $250 on the used market in sometimes rough but usable shape. Many don't really have collector value. I've seen a couple cut-down and used on the SASS circuit. They are sturdy shotguns. One example: 311
  22. Solomon's has some of the lowest prices on powder in N.J.
  23. Parker replied to Teky0101's topic in Shotguns
    Rather than shoot turkey loads at $2 to $3 apiece to figure out your point of impact relative to your point of aim, sight in your gun initially using some cheapo shells at the same distance. What type of sights on your shotgun; front bead? If you really need a recoil reducer, try Brownell's: MERCURY RECOIL SUPPRESSOR Some are designed to fit in the buttstock, or in the magazine tube, or secured to the underside of the shotgun's barrel. The buttstock is the most common place. But 2 oz. loads should be tolerable during a short range session with a shotgun of that weight. Only you can be the judge of that. Lead shot in a bag stuffed in the stock's through-bolt hole is somewhat effective as a cheap alternative. Get some turkey targets with a full head and neck image where the aiming point is below the wattles on the neck. Lower third before mid-point on the neck is the proper location to aim.
  24. That's a classy-looking and practical Henry you have there with that tang peep sight.
  25. Parker replied to Teky0101's topic in Shotguns
    Some thoughts: * Before buying any more turkey choke tubes, pattern one first to determine how it patterns the turkey loads you've chosen. * Shotshells operate are low pressures. Target loads operate in the range of 8,000 - 9,000 psi. Heavy magnum loads operate higher but still in the realm of 13,500 psi. Both are lower than many high-intensity handgun cartridges. Those low pressures are nothing compared to a high intensity rifle cartridge which can operate at pressures of 65,000 psi. When pressures are this high, recoil and muzzle climb are tamed more effectively when using a ported barrel. Porting on choke tubes is a cosmetic sales gimmick in my opinion. Ported shotgun barrels and ported choke tubes are also noisy. Anyone who's squaded with someone shooting a Cutt's Compensator on their muzzle knows you don't want to stand next to that guy. They are obnoxiously LOUD! Are ported tubes effective in reducing recoil? I doubt it very much. Reducing pressures inside the bore is a more effective way of reducing recoil. Having a buttstock that is full with a proper comb that falls away from your face upon recoil and one with depth and width in the butt face to spread recoil over a greater area will reduce recoil. Most "target" shotguns are heavy, promoting both barrel swing needed for the clay games and offering weight to absorb recoil and make extended shooting comfortable for the shooter. * If you want soft recoil in your shotgun, use a barrel that's overbored for its gauge, and use removable choke tubes that are designed for overbored barrels. If you really want a soft shooting shotgun (target or hunting) that patterns well, have some barrel work done to it by a professional who knows smoothbore barrels. 1) Start by lengthening the forcing cone. Most are cut relatively short, usually only 1/4" in front of where the shell opens to in the chamber. Google 'custom turkey guns' and you'll discover many have their forcing cones cut as long as 1 1/2" to 2". The concept is to reduce the backpressure and ease that big shot charge down the bore. The first "obstruction" the shot charge meets is the forcing cone as it reduces the bore size down to 12 ga. dimensions. It's been shown that re-cutting the forcing cone without a change in chokes will merit an 8%-12% improvement in pattern density. I've used both Briley's services & gunsmith Curtis Wilbanks to recut the forcing cones on my barrels specifically used for heavy turkey loads. Two gunsmiths on the East Coast, Bansner and Wilbanks were the first to offer custom-tuned shotguns specifically outfitted for turkeys and heavy loads more than twenty-five years ago. All they did was deploy some commonsense tricks when it came to squeezing a lot of lead shot down a barrel to produce tight patterns at extended ranges. - Extended choke tubes work because they extend the parallel length of the choke. Longer choke tubes usually produce better patterns than shorter tubes, all things being equal. But that's not always the case. How deformed the shot charge is before it arrives at the choke also determines how effective the choke will be in dispensing a uniform pattern. Your wad, setback under pressure of the shot column upon ignition and pellet hardness also have a bearing on how deformed the shot charge will be. Ever hear of the term "square load" shotgunners use when describing the optimal load to be used in a particular shotgun gauge? The more shot the more difficult it is in getting that charge down the bore without too much deformity. - Many target guns are overbored today to produce better patterns, and soften recoil, particularly target guns which will be shot for many rounds in a day's competition. Mossberg's 835 UltiMag is an overbored hunting shotgun. Overboring softens recoil by reducing pressures and also results in less deformed shot down the barrel. Browning and Winchester both offer overbored barrels today, and Beretta's Optima barrels are also overbored. Remington target trap guns have special bores and chokes unique to them and they are designed to deliver optimal dense patterns at 40 yds. with target loads. Some early shotgun barrels with fixed chokes shooting unprotected shot still patterned very well. Why? The better shotguns had chokes with a parallel as long as six inches making up the choke. Shot was eased as opposed to slammed into the choke's constricting area. That's why those old shotguns shoot such tight patterns today with loads utilizing modern shotshell wads. PS - If you check a recoil calculator, and put in the values of your shells (charge weight, velocity, powder charge) and the weight of your shotgun, you might be surprised at how much recoil a 2 oz. or 2 1/4 oz. 12 ga. will generate in your 7 lb. Mossberg 535. It isn't for the faint of heart. It would be more effective to add a mercury recoil reducer in the buttstock vs. a ported choke tube to tame recoil if that's a concern. But it shouldn't be if the gun is used for hunting. But your range sessions with various loads are going to be fun in a painful way. Shotgun Recoil Calculator

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.