Everything posted by Parker
-
Remington 1100 12ga barrel
Based on the link you sent me, "PLAIN" means the barrel has no vent. rib. That's an aesthetic decision you may want to ponder. SKEET or Imp. Cyl. are fine for a skeet course. You would preferably want at least MOD for trap and FULL is better for all presentations offered on a trap field. SKEET is up to .006" tighter than a true CYLINDER designation, delivering 45% patterns at 40 yds. IMP.CYL. is .007" to .013" tighter than true CYLINDER, delivering 55% patterns at 40 yds. Manufacturers are vary their choke dimensions based on internal barrel dimensions so a good way to tell is to mike the muzzle. You'll notice the variances then. Some makers list their I.D. measurements, others do not.
-
Remington 1100 12ga barrel
You could thread the existing barrel for a RemChoke but you'd still have an issue with the barrel's single gas port porting the gas properly to function with light loads. That means an alternation is necessary which some may not want to do. Better to find a replacement barrel for light loads, preferably one that is RemChoke'd. Keep in mind Remington also made "light contour" barrels for this model, so RemChoke barrels found for sale listed as "LC" are thinner walled in construction. (This was done to enhance the handling qualities of the shotgun as it made for a lighter swinging, easier carrying shotgun.) Fitting one to your existing 1100 will work fine but will show a gap between the forend wood and barrel. Some find this unsightly but it's only a cosmetic issue. (You can buy a replacement forend from Remington suited for the light contour barrels if you desire.) The fact that all these options are there for you indicate you are not the only one who has encountered this dilemma. There are plenty of solutions. Two links for used barrels: Barrel Exchange Corson's Barrels
-
Sen. Lautenberg at it again
From today's Record: Gun Control Race to the bottom on gun control Sunday, September 25, 2011 BY FRANK R. LAUTENBERG The Record In 10 years, guns have been used to murder about 100,000 people in the U.S.; two wars have killed about 6,000 Americans. OUR STREETS are flooded with guns. In a country with just over 300 million people, there are just under 300 million guns in our neighborhoods. Guns have been used to murder about 100,000 people in the United States over the past 10 years. By comparison, approximately 6,000 American soldiers have died in the wars in Afghanistan and Iraq during that same period. The fact is, lax gun laws and loose gun ownership have created battlefields in our very own cities. The last thing we should be doing is increasing the accessibility and mobility of dangerous weapons. In New Jersey, we work hard to keep guns out of the hands of people who have no business having them. Before we issue a permit for concealed carry, we require applicants to complete a firearms training course and demonstrate why they need to carry a handgun. These rules make New Jersey's handgun laws among the nation's toughest — and our state should take pride in that. But now in Washington some are trying to expand gun ownership rules by stripping states of their right to decide who can carry concealed weapons. A dangerous measure proposed primarily by Republicans in the House of Representatives would allow licensed gun owners to carry concealed firearms across state lines. In effect, the House bill would let gun owners in states with lax laws carry concealed weapons into New Jersey and other states. States like New Jersey would be forced to accept the weakest standards in the nation, triggering a race to the bottom. We don't need states like Texas, Arizona and Alaska telling us how to protect our people from gun violence. The House bill would also put police at risk by making it tougher to determine whose gun is legal and whose isn't. Law enforcement has it tough enough, and we must not make their jobs more difficult by allowing this in our state. It would be a nightmare for law enforcement, but it will be a dream come true for the National Rifle Association, which is hanging its hopes on the prospect Congress will abandon common sense and pass this law. We can't allow that to happen. When the Senate debated similar legislation during the summer of 2009, I was proud to lead the fight that ultimately led to its defeat. Our position has received a lot of support from mayors, police chiefs, prosecutors, state lawmakers and advocates for domestic violence victims. We need to continue hearing from them so that communities stay involved, keep in touch and remain on the lookout. In a recent poll by Mayors Against Illegal Guns, almost three-quarters of voters opposed Washington's interference with states' rights to establish their own standards for issuing concealed carry permits. The public has had enough, especially after the recent tragedies in Tucson, where Jared Lee Loughner shot and killed six people, and in Carson City, Nev., where a gunman shot and killed five people, including himself. The fact is, we should be strengthening gun-safety laws – not weakening them.
-
Remington 1100 12ga barrel
Your 1100 3" Magnum has a single gas port in the barrel for venting gas. Your action is designed to cycle from that barrel with heavy field loads of 1 1/4 ozs. and heavier. The standard 1100 2 3/4" barrel set up for target or field loads has two gas ports. You can replace your 3" chambered barrel with a standard 1100 target barrel. It should work fine with 1 1/8 oz. skeet or trap loads. There is talk in the link I provided of swapping out other parts, so you may want to confer with a gunsmith for their opinion as well. Parts are cheap and simple to replace yourself. I know of shooters who have had gunsmiths drill an additional port OR enlarge the existing port. (Some add the second port with a removable set screw.) I suspect too it depends on how light a load you want to go where you may have cycling problems (I.E. 2 3/4" 1 oz.) It is important that port remain free of debris. Remington 1100 Choke will be determined by whether you plan to shoot trap or skeet. (I have two friends who shoot skeet with their 1100's and 26" bbl. barrels with a fixed SKEET choke. They have been doing so for thirty years now with no problems.) Barrel length is a personal opinion. Most opt for the 28" bbl. for target work, and you can find 30" bbls. for trap if needed. Buying an 1100 barrel may still lock you into a setup with a fixed choke, as most 1100 barrels had fixed chokes, which is not the most versatile today. The original 3" 11-87 which replaced the 1100 handles light 2 3/4" loads to heavy 3" 2 oz. loads with no problem. And 11-87 barrels are equipped with RemChoke's.
-
Gimmick Ammo
Looks great on an animated computer mock-up right? So, this is advanced grapeshot for a handgun? Agree, gimmicky for a real-life situation.
-
New Series ‘American Guns’
He's not a member of the American Pistolsmiths Guild, which is a select group of premier builders. Yet he gets a TV show? A quick perusal of his website shows nothing special, just some menu options of canned run-of-the-mill services, so he must be a showman and a master at self-promotion. His GALLERY is a pictorial of who's-who of the celebrity world. I can't find pics of his gun work. I'm making an assumption here but he's no Hamilton Bowen either. This new series smells HOLLYWOOD.
-
12ga skeet rounds
#8's are a good all-around size. #9's are preferable if you are shooting skeet on a regulation skeet course. That's all you need there. #8's are good for most all clay presentations. #7.5's are best for trap where you need the larger/heavier pellet to break the clay at the longest distance.
-
Gaston Glock Weds
My friend sent me this today: Congratulations to Mr. Gaston Glock, 82-years-young, on his recent marriage to 31-year-old Kathrin Tschikof. It's heartwarming to see a couple so clearly in love with one another. Gluck fur Glock My German is a bit rusty, but I was able to translate the following from the article: "Super-rich god of war marries Kathrin Tschikof, a successful gold miner known for her good looks and the personality of a Russian boar hog. Glock's rightful heirs stood appalled at the wedding ceremony and fellow guests later reported hearing whispers of drunken, dastardly plots from old Helga, the former Mrs. Glock, in the reception's cocktail lounge. The new Mrs. Glock may do well to double-check the security of her ski lift bar in the Black Forest this season."
-
Need gunsmith in North Jersey (Oakland area)...
G&H is pricey, but I'm sure their assessment is done right. If you desire a "fitting," you'll need to make an appointment with them and the cost is $200. I believe they perform this at the shooting facility now, on Stanhope Rd. in Andover. However, they are not the only game in town. Any good gunsmith who works with wood and knows shotguns should be able to accomodate you. If you shoot enough over time you will have your measurements memorized as to what fits you best and what won't. Sometimes it makes buying the next shotgun easier since many sold have their dimensions published. (You'll notice G&H publishes stock dimensions on each of their shotguns for sale.) When I have this information, I know if the shotgun will fit me or not before I even shoulder it. There's plenty of stuff to search on the internet about "stock fit." A properly fitted stock makes the difference between a good shooting shotgun and a great shooting shotgun, whether it's afield or in competition. Here is a simple read on gunstock fit. All it reviews is one person's take on LOP and some mention on comb height. It doesn't even delve too much into cast or pitch, two other items that have bearing on proper fit. Stock Fit
-
My new to me rifle...
With a 1 in 12" twist, your barrel should be able to stabilize bullets as light as 125 grs. up to the heavier 190 grs. Optimally, the middleweights (140 grs. to 175 grs.) should all work well, but there will always be some surprises, some pleasant and some that leave you scratching your head.
-
450 Marlin lever action
Don't undersell the Microgroove barrel for jacketed or lead loads. I've used up to 275 grs. (Barnes) with jacketed bullets in my .444S, but prefer the Hornady 265gr. I've yet to try heavier hardcast bullets, but that's on my agenda. I've been able to coax my .444 Marlin to shoot soft lead loads fairly accurately.
-
Canada
Your guide should detail all the specifics for transport and what's legal there. Keep in mind that most guides will look at you funny if you show up in camp with a shiny new rifle. Better to show up with one you are proficient with that has ample power for a killing shot. And don't be surprised if they ask you to show your proficiency with it prior to going afield, particularly if you're using the stock open sights. (Be doubly concerned if the guide DOESN'T seem concerned about your choice in weapon or proficiency. That measures how concerned he is with getting you your bear.) The cartridge you are using is more than adequate. Use a good stout premium bullet that will penetrate as much bear as possible yet mushroom in a controlled fashion. Chances are, your range will be measured in feet rather than yards as you'll be shooting over bait. Spring means thick foliage up there, so picking a clear shot through a lane may sometimes be difficult. Prepare yourself for the worst possible shooting scenarios, for shots you will be presented with are never ideal.
-
450 Marlin lever action
Oops, sorry. Then you already know what a good round the .45-70 is. Maybe do something exotic with your next lever-action? Grizzly Custom Brockman Master Guide Lee Hadaway Take-Down
-
450 Marlin lever action
My .$02 would suggest the venerable .45-70 over the .450 Marlin. The .450 Marlin is the .45-70 factory hot-rodded out-of-the-box with a belt on the case. Brass is more expensive, and so are loaded rounds. If you reload, a quick peek at the reloading manuals show both rounds when loaded for modern lever-actions firearms operate at very similar pressures, and can produce similar velocities with the same weight bullets. Premium loads from custom makers for the .450 Marlin can run you $50 for a box of 20 rounds. I know it's a hunting round, not a target, plinking round; but that's a bit excessive. Both can be unpleasant to fire from the bench for an extended period when loaded to maximum potential, particularly the short-barreled .45-70 or .450 Marlin carbine with the ported barrel which I was never a fan of. I surmise it's a handy gun for carrying but when you touch one off it's loud! I prefer the 22" barreled models (I think the barrel actually measures 21 7/8.") They're overall length is only 40.5", which is still pretty handy for toting in the woods, pushing thick cover, or sitting in a tree stand. As for the Remlin's, that phenomenon of suspect quality has been bandied about in the forums since 2009. Remington changed the way a Marlin was to be made on the assembly line, and supposedly there have been quality control issues. I hope this is something they can iron out. It's also making the hardcore Marlin fans search out pre-Remington influenced guns which is making them harder to find. I always saw clean .45-70's for sale in other areas. Head into obscure hunting locations in rifle country like upstate New York or over in Pennsylvania, search their local gunshops and you'll find what you're looking for if you don't want a Remlin. (or Marlington!) PS - Don't count out the .444 Marlin if you want a big bore. This is also a very versatile round, particularly if you handload.
-
Passed my hunter's education class! (Shotgun/Rifle)
Congrats! Start with the easy stuff first such as small game like rabbits and squirrel. They're also tasty table fare. View every hunting trip afield as a scouting trip for other game. The more time you spend in the woods, the more you'll learn.
-
Is a 28 gauge enough gun?
Pheasants have that reputation of being able to absorb marginal hits and still fly a long distance or run like Usain Bolt. A good dog helps. Get on the bird quick and an ounce of 6's should drop any pheasant. It's not a particular gauge that's effective on birds, for everyone has their favorites based on experience. The appropriate load and choke combination fired within its effective range is more important than what gauge is used. Yes, a 12 ga. will make you an omnipotent pheasant-smiter. But hit a bird square at 10 yards with a heavy load and there's nothing left for supper that night.
-
Is a 28 gauge enough gun?
The 28 ga. is more than capable when used within its limitations. It's the perfect grouse & woodcock gauge with its standard payload of 3/4 oz. of the appropriate shot size. And it's a good gauge for dove and quail too. And it's adequate for larger game birds like pheasant when hunted over pointing or close-flushing bird dogs. Most wounding of game comes from the use of inadequate shot size or picking the wrong "presentation" time when pulling the trigger on flying, fleeing game birds. "Wild" game birds like pheasants, huns and prairie chickens out West offer tougher and longer shots than what you'll encounter when hunting farm-raised birds around here. Ammo makers (Federal) added a 1 oz. loading to their 28 ga. offerings a while ago in an effort to make the 28 ga. more capable for large gamebirds like pheasant, but I don't think it's cataloged anymore. When compared to the 20 ga., comparable loads cost more when found the 28 ga. boxes. Frame sizes on double guns are comparable in size when comparing the 20 ga. and 28 ga. (Beretta does offer a "baby frame," but only in their higher grade O/U doubles. The "baby frame" is the true frame size for the 28 ga. and .410. Standard grade Beretta's like the 686 share the same frame between the 20 ga. and the 28 ga.) The Browning 20 ga. frame compared to the Beretta 20 gr. frame is a skosh taller but it also narrower than the Beretta's. The Ruger O/U weighs a half pound more than it should be for an upland shotgun in 28 ga. A Beretta 28 ga. will weigh less than 6 lbs, Browning Citori's will be at 6 lbs., Ruger's are heavier. I think the 28 ga. is a nice gauge, but the 20 ga. is more versatile. You can always load down the 20 ga. to 3/4 oz. loads if you want to shoot lighter loads. I use these at times in early season when just hunting woodcock. If you want an O/U, I would recommend a 20 ga. over a 28 ga. A couple of good reads from Chuck Hawks - The 28 gauge Why Your Shotgun Throws the Wrong Pattern
-
Official Precision Rifle Picture Thread
I wish I had a precision rifle, but I'll have to settle for my hunting rifles for now and squeezing some accuracy out of them to the best of my ability. I have plans to get one some day that fills that specific niche, but it will have to serve double-duty for hunting as well. I have a couple of makes/models in mind. The offerings from various makers are too many to ponder. Maybe that's why I can't make up my mind?
-
sights?
Glad it worked out for you. I noticed from the picture depicted on Ithaca's website that I posted previously the green model shows the metal surrounding the colored pipe is higher and thicker than found on my older Raybar units. Mine date back to the 60's, and the part that encases the plastic is made of brass. And it's very thin, so the height of the front sight is slightly more than the thickness of the plastic pipe. The originals look like this one I found on eBay: Ithaca Raybar
-
Loss in NY CCW Case
Interesting biased title for the article. Not that this statement is an excuse, but once you cross the river, Westchester county is a different world than its counterparts on the west side of the river.
-
Remington 1100 20 gauge
Corson's is a good source for obscure, hard to find barrels for certain models. Many I know have used them with success.
-
Remington 1100 20 gauge
Try these two sources for barrels. Some are new and some are used. A barrel with choke tubes would be most optimal, but not necessary. Fixed-choke barrels aren't bad provided they fit the intended need. Barrel Exchange Corson's Barrels
-
Remington 1100 20 gauge
I suspect the choke and the load that you are using, then the range you are trying to break the clay at, all have more bearing on your results than an extra 2" of barrel length would make up for. True, the longer sighting plane from a longer barrel has some benefits when target shooting, but two barrels choked similarly in different lengths will still pattern about the same. What choke and load are you using in the 26" barrel? 20's can usually go toe to toe with the 12's from the 16 yard mark with the right choke and load out to a certain yardage. Once that range extends to the 40 yard mark and beyond, the 12's simply have the edge with their better pattern density.
-
sights?
Dubhead88, Here's an assortment of bead front sights if you decide to change things on your vent rib barrel. I picked this website just because of the variety w/ photos depicted. As you can see, there are plenty of variables out there: Bead Sights I personally like the old style red Raybar sight Ithaca used on their M37's. I even have an old original Raybar sight mounted on a Browning A5 barrel. They are somewhat luminous yet sturdy. Other shotguns vary with the style of bead they come standard with today. The white Bradley-style beads on my older Remington's are nice and they stand out. Browning field guns usually have a bright German silver front bead and these are readily visible. Real ivory beads are nice and look good on classic doubles but they can be expensive. Beretta field guns usually have a brass front bead. They are so small you can barely discern them. I'm only cognizant of the front bead on any shotgun when I'm sighting on a stationary object though. When the barrel is moving on game or targets, the bead is simply a secondary blur, for you should be focused on your target and ahead of it. I prefer front bead sights that are threaded to the rib or ramp so I know they will stay in place under hard use. I see Ithaca now has their Raybar front sight in green with a 6-48 thread which should fit most American shotguns with a vent. rib:
-
sights?
Ditto what others have said. With a bead front sight on a shotgun, the "rear sight" is you; your head nestled on the comb with a proper cheek weld and consistent gun mount to your shoulder each and every time. It's more than adequate for clays, birds, turkey, or shooting buckshot. Just remember if you want to shoot slugs in N.J. you do need front and rear sights. If you have a bird barrel with RemChoke installed on your 870 now, getting yourself a slug barrel is probably the optimal solution to cover all aspects of game you intend to hunt.