Everything posted by Parker
-
What Guns Are You Currently Lusting After?
Getting my Parker SxS 16 ga. fully restored - new walnut & restock to proper dimensions, remove barrel dent, adjust lockwork, case color receiver, polish metal & re-blue, lengthen forcing cones, open choke in rt. bbl. (12-14 month wait) When done, for me it will be a brand new shotgun once again and should be good for another century of use. Something realistic: White Oak Precision Service Rifle upper pre-64 M70 in .270 Win. 9422M Two delusional flights of fancy: 6.5 Creedmoor from Greybull Precision Custom .284 Win. or .308 Win w/ Surgeon action, Krieger bbl., Badger Ordnance bottom metal
-
So does anybody here even own a muzzle loader?
The in-line bug never bit me yet. But I don't lament those who use them. When equipped with a scope some rifles are true 200 yard hunting tools. I like the challenge of the caplock, although my flintlock buddy tells me I'm still cheating. Every now and then my rifle's been known to produce a good group off the bench:
-
So does anybody here even own a muzzle loader?
Yes, some folks who are into BP are fanatical. Some have dropped metallic cartridges entirely too in their fanaticism. I've posted a pic of my muzzleloader here before. I've been shooting a T/C Renegade .54 caplock for three decades now, and still load the same load that proved most accurate in it: 110 grs. of Pyrodex & 430 gr. Maxi-Ball. Produces a bit more than 1,900 FPE at the muzzle. I've also had good results accuracy wise with various weights from the old defunct Buffalo Bullet Company as well, but never used them on game. The Renegade is the only muzzleloader I own right now. Cleaning them is the only gripe I have. I heard some of the newer powders shoot cleaner but it's not enough for me to change my load. The only modification I've made to mine since I purchased it was add sling swivel studs, a T/C peep sight and a T/C bead front sight. I drilled the center out of the solid metal bead to which I added a tiny spot of white automotive paint. Also added a fiberglass rod to prevent any problems should the hardwood rod ever break in the field. Mine has proven to be very accurate and reliable over the years. I've had complete penetration on whitetail deer with the 430 gr. Maxi-Ball at 10 yds. out to 80 yds., but I have no recovered projectiles to ascertain bullet deformation. It simply makes one big hole going in and a slightly bigger one coming out. It's a very easy gun to shoot offhand with the forward muzzle balance and with the set trigger you can adjust it to a feather-touch pull that breaks like glass.
-
Low Priced 3.5 Shotgun Turkey Ammo In South Jersey?
You know that "low cost" and 3.5" shells are not synonymous. Most shops sell these loads, and you can order them online as well. Now is actually a good time to order them as the season has ended. My advice would be to start patterning your gun with 3" shells first. The most important thing you can do to learn about loads and your gun is pattern with as many different loads to find the right combination. Look for weights in the 1 3/4 oz. to 2 oz. class and try those first. 3.5" shells with 2 1/4 oz. of shot will recoil excessively but will have less striking energy per pellet downrange in the smaller pellet sizes since their velocity is reduced a bit compared to shells with lighter, faster payloads. HD shot is supposed to give you a 4-8 yd. edge on energy with comparable velocities if you choose to go away from conventional lead, copper-plated or nickeled shot. Shot size and what load patterns best is more important than payload size. Retained energy and penetration kills turkeys. My brother and I have used 2 3/4" shells with payloads as light as 1 1/2 oz., and with 3" shells with payloads up to 2oz. of shot. You don't "need" 3.5" shells. My preferred handloads are 1 3/4 oz to 1 7/8oz. using #5's or a buffered duplex load using a combination of 4's & 6's or 5's & 6's. Velocities will run 1275fps to 1300fps safely. Hone your hunting skills first, and kill birds as close as you can call them in. When distances are under 15 yds. you realize you don't need to throw 2 1/4 oz. of lead at them to drop them cleanly. Some info on picking the right turkey load: The Right Shot Size Keep in mind the descriptor "turkey loads" is a great marketing gimmick. Before the ban on lead shot for waterfowl, any heavy duck or goose load in shot sizes 4, 5 & 6 made for and doubled as great turkey loads. And they were found in 2 3/4" and 3" sizes, with payloads up to 1 7/8 oz. They were more than adequate.
-
12GA vs 20GA slug gun for deer? Single Shot or Pump/Semi?
Pushing down on the barrel to see if it's recoil-operated is the quickest way to determine without removing the forearm as Old School noted. If yours is the XL, it should be the gas model. Considering you only paid $80 for it, that's a bargain, as these are good shotguns. Go to Corson's Barrels website and order up a slug barrel for it if you want to hunt with this and shoot 12 ga. slugs. The only consideration if there is a concern is you would be limited to shooting old style Foster slugs or similar-type projectiles. Smoothbores with iron sights can still turn in some impressive accuracy with the right loads for shooting under 100 yards. Considering what you've invested, it might be worth it. Ithaca Barrels A lot of folks are going to the 20 ga., shooting rifled barrels with sabots. Some folks are getting tremendous accuracy out of their 20's, with less felt recoil than the 12's. Folks who scope their 12's & 20's with sabot rounds can reach out a long way accurately with the right gun/load combo. It's merely a preferential decision on the gauge. I don't think you can go wrong with either.
-
New gun and my first handgun
That Partridge front sight with the McGivern gold bead is the bomb. Sweet revolver.
-
pharmacy_shooting
Obviously not the right method. You might get away with these tactics on the battlefield, but not in the civilized homeland: 3 different camera angles
-
Questions, questions, questions!
I see not much has changed there.............seems personable, affable fellows are hard to come by in any retail business. I've always wondered how they managed to stay afloat but they are the ONLY place of its kind available in this area that offers such a facility. Well, at least you got to shoot some.
-
Best value in tumblers nowadays?
Still using my old Midway 1292. I bought the original in the early 90's. Then there was a consumer recall on them in 1998 concerning the motor that may/could overheat. I found out about it when I got a nice postcard in the mail alerting me of the recall. I never had any problems with mine, but turned in my original motor base to Midway. They sent me a complete unit within a week, so now I have two tubs w/lids. I have been using that replacement with no issues for the last thirteen years. Always had excellent customer service from Midway. Someday I may get a Thumler's, but that will be after this one fails. This unit has served me well with no complaints.
-
Questions, questions, questions!
No, their website won't elucidate much in that area. I would call them. They will respond via your email with a "call me" response.
-
Questions, questions, questions!
If you are in Saddle River, you are only minutes away from The Firing Line in Pearl River on Middletown Road: http://www.firinglineny.com/ I know it's in New York, but you can go here and simply rent firearms of your choice and purchase ammo here too. At least you can get the feel of what you want without taking a long ride. I know he has most of what you're interested in trying out in his stock.
-
Migratory birds with a crossbow
The Atlantic Flyway Council still lists the Canadian Goose as migratory. Warmer temps have helped them linger longer in the land of manicured lawns, golf courses, athletic fields and parks. But I suspect folks won't be making much of a dent here in their population numbers with crossbows.
- New SA M1A
-
K-Frame Sights on a 1911?
Bo-Mar adj. sights were available at the time, and were considered the route to go for sturdiness and a quality sight picture before dots, bars and luminescent sights came into vogue. (I believe it was Bo-Mar who trademarked the Serrated Blade.) The Bo-Mar was just a bit obtrusive on some slides unless the slide (Colt) was milled a bit to accept a lower profile but on some slides they just didn't work because of their size. The S&W adj. unit was a bit less obtrusive. Yes, the S&W adj. sights can be improved upon today, but they were pretty good in their day.
-
K-Frame Sights on a 1911?
Kings Gun Works, Armand Swenson and a N.J. pistolsmith named Austin Behlert popularized and installed S&W adj. sights on many custom builds years ago. Interesting to see it being done still. If you do some Google searches on those names you'll see some of their work.
-
N.J. county, state prosecutors not allowed to carry guns after retirement
TRENTON — County and state prosecutors are not considered law enforcement officers under New Jersey’s strict gun laws that allow retired cops to carry weapons, an appellate panel ruled today. The decision by the three-judge panel upholds a lower court’s finding that Giles Casaleggio, a former assistant prosecutor in Union, Passaic and Morris counties before becoming a deputy attorney general, does not qualify for a gun permit as a retired law enforcement officer. The court said New Jersey law says specifically that deputy attorneys general and assistant prosecutors can carry weapons while holding those jobs, but says nothing about after they retire. "Unlike police officers and investigators, both assistant prosecutors and deputy attorneys general are ‘lawyers first and foremost’ whose ‘essential responsibility is to provide legal advice,’ " the court wrote, referring to the statement accompanying the Senate bill creating the law in 1996. "Their primary duty ‘is to perform legal services in connection with law enforcement.’ ’’ Casaleggio contends that he is entitled to a gun permit under the Law Enforcement Officers Safety Act of 2004 that recognizes law enforcement officers and their families can face risks to their safety, even after their retirement, from vindictive criminals whom they prosecuted. "He believes that the statute afford him that opportunity,’’ said his attorney, Frank Pisano III. "Like any other prosecutor, he’s locked up some people in the past who may come up for parole now.’’ Pisano said his client has not received any threats to his life. Had that been the case, he said, Casaleggio would have been able to apply for a gun permit through a different method. The lawyer said New Jersey’s strict gun laws require him to show an urgent need for self-protection, that he was subject to substantial threat of serious bodily injury and that carrying a weapon would reduce that threat. He said that was "a very difficult standard to meet." Casaleggio, who is now a professor of criminal justice at St. John’s University, has not decided whether to appeal the decision to the state Supreme Court, Pisano said. Peter Aseltine, a spokesman for the state attorney general’s office, said he is not aware of any retired deputy attorneys general or assistant prosecutors who have been issued handgun permits based on their former jobs. Link
-
Picked up the rest of my Dad's gun collection
The forend simply snaps in place. It's not uncommon for folks to shoot 2 3/4" shells in short chambered guns. They'll chamber fine, but pressures peak when they are fired. As long as they are not baby-magnums, you could get away with this. But, a steady diet will cause problems over time. Watching a rib separate off the barrel or cracking the frame due to heavy loads will result in a repair more expensive than the shotgun itself. A Flues' only weakness is its strength. It's strengths are in fluid handling and light weight afield. Unless you know the full provenance of the gun, feed it a steady diet of low pressure rounds. In doubles I have that date 1927 and earlier I will shoot only 2 1/2" shells. Your Flues will last as long as intended if you keep pressures low. Best of luck with it and enjoy your Dad's shotgun.
-
Picked up the rest of my Dad's gun collection
That's a really nice looking Flues grade. No buttered screws or smashed pins and a top lever that's right of center. If you've ascertained the build was 1915, you should check the chamber lengths on your Flues grade. Early Flues grades and the year indicate your gun would have 2 1/2" chambers. Flues production ceased in 1926 and at best, the longest any Flues chamberings found in 12, 16 or 20 ga. would have been 2 9/16" chambers at most. Ithaca's move to the stronger NID model frame also came with 2 3/4" size chambers. So don't shoot 2 3/4" shells in your gun. Your Flues is perfectly acceptable to use 2 1/2" shells, and if you handload, make loads with pressures no more than 8,000-9,000psi. One-ounce loads are more than adequate for game or clay targets.
-
Osama Raid Revealed on May 16th at 10pm
It would be worthwhile watching if you had your "Rambama" action figure to play along with. SEAL Team 6 Action Figure
-
Shotgun deer Q
Yes, provided you have a rifle permit.
-
Shotgun deer Q
If this is the case, then you are relegated to buckshot in N.J. unless you can formulate a way to get iron sights (cheapest route) on your shotguns. Why don't you opt for an inexpensive muzzleloader?
-
Buying a used M1A rifle
It depends on what model you are looking for. Some are lovingly cared for and others are not. Earlier used M1A's used a mix of USGI parts along with SAI parts up until early 2000 I believe. New ones today are all SAI. USGI parts are considered better. You can always add these later along with other aftermarket products as required. Only you just don't have the smorgasbord of offerings like you do with an AR. Look for wear or peening on the inside of the operating rod where its final rearward movement meets the forward underside part of the receiver. Some have a tight fit and you'll see peening or metal removed from the op rod. A bit of work with a file helps relieve this. Too much wear could spell trouble down the line. Make sure the threads on the gas cylinder lock and gas cylinder plug turn easily and are not cross threaded. Make sure the gas cylinder valve spindle depresses properly and turns freely to either of its positions. Inquire if the owner installed shims to align the gas port. Some are fine the way they come and don't require shimming, some are a little off and folks have played with their gas system. Make sure the flash hider is firmly affixed on the muzzle. Make sure the bolt lock works properly and holds the bolt open when an empty magazine is removed. Make sure the windage and elevation knobs on the rear sight move freely with graduated audible clicks and move the peep sight as intended. If you are looking for "used," one thing to check for in the safety area is "hammer follow through." With no magazine in the rifle, hold the trigger back, cock the action a few times, then let the operating rod fly forward under its spring pressure. If the hammer follows that jolt, the stock is either ill-fitting or was replaced and has too much meat in the area of the trigger guard for a proper bedding surface for the receiver and trigger guard. You might want to stay away from the factory SAI 'glass stock. I've heard it's "rubbery" in feel. Folks on the M14tlf.com forum seem to feel the same way. The walnut stock is better and if you must have fiberglass then get a USGI 'glass stock. LRB Arms has them and sells them.
-
Recommendations for rings & mount for AR
Thanks all, I will look into the LaRue options. I would agree to some extent. Quality comes at a price.
-
Recommendations for rings & mount for AR
I've been looking at pics of everyone's' AR's and how they are outfitted and so now I am asking for opinions from folks on a sturdy set of rings & mount combination for my Colt CR6724 flattop. I bought this rifle back in late '98 but have used it only occasionally. Back then it came with a mount from B-Square which I initially used to see how accurate the rifle was but I was never enamored with the mount and I never put a proper scope on it either. Kinda became an unfinished project. Other things interested me at the time and it's sat unused in my safe for years. The last time I shot it was in 2003. Now, I am planning to take it out this summer/fall and do some paper punching, load development and ultimately some varmint hunting. I will also purchase a new scope (probably one of the Leupold LR series, w/ 40mm or 50mm adj. objective) that will be suitable for varmints like 'chucks, crow, coyote. How are TPS rings? How about thoughts pro vs. con on their aluminum vs. steel rings? And I don't really know if I have a need for QD rings/mount so a solid mount seems fine to me unless someone can show me otherwise. The NightForce one-piece mount looks sturdy, simple & slick but the price gives me the willys. Other one-piece mounts seem sturdy, just don't know which one to get. Just uncertain whether to get a one-piece mount, or a set of high rings mounted directly to the flattop, or rings that mount to a base that's mounted to the flattop. I realize the style of scope and size will somewhat dictate and limit what I can use, but I'm also looking for some opinions from others as to what has worked best for them. Thanks - Kevin
-
why is 12 gauge more powerful?
The larger bore size equates to more powder and larger payloads with less pressures. The 12 ga. can typically handle more in payload compared to the 20 ga. The largest 12 ga. offering, a 3.5" 12 ga. shell, can handle up to 2 1/4 oz. of lead shot. Powder charges can be as much as 36-38 grs. of slower-burning shotshell powders pushing this payload, depending on hull/wad combination. A 3" 12 ga. shell can handle up to 2 oz. of lead shot. The standard 2 3/4" shell can handle up to 1 5/8oz. of lead shot with the right wad/hull combination. Just note the variances in a standard to magnum configuration of the 12 ga. 00-buck load which can accommodate 9, 12 or 15 00's. A 20 ga. 3" shell can accommodate up to 1 1/4 oz. of lead shot with safe pressures, while 2 3/4" shells are typically loaded with 7/8 oz. to 1 oz. of lead shot, but there are loads in the 2 3/4" shell that can go as high a 1 1/8 oz. in the right hull with the proper wad combination. The smaller bore size operates are higher pressures so it cannot be pushed like a 12 ga. or 10 ga. can.