JackDaWack

lol, I didn't even open the email prior to deleting it.

Their faq says they will ship compliant rifles to NJ, but they will not ship completed lowers. IMO, the issue is on the buyers end and the FFL if the stock needs to be pinned. But it's still legal if there is no semiautomatic upper attached to it, or being sold along side it.

I dont really understand this, all lowers go through an FFL regardless of state. If that's PSA policy, I wouldn't support them, like many other companies who refuse to ship legal items to NJ.

Isn't the whole reason people "hate" on the serpa holster because you have to manipulate the locking device too close to the trigger guard? I am curious why in that situation its bad, but here it's good? I think of the possibilities of a stressful situation and mitigating the actions of the firearm correctly preventing a AD. FYI I've never used a paddle mag release,.

Was I supposed to watch the video sideways? There is no reason a thief should easily be able to get your safe on its side, and you can easily get a better safe for the money. I'm not saying you cant get into one, but a good safe under 2k like the one i posted can be had that will have the potential to stop a pry attack when standing. To me, the safe worth purchasing has good pry attack resistance when secured to the floor and a wall. If you even place it strategically you can offer little to no leverage on the door joints. Once you get into good fireproofing, drill and cut resistance it's too expensive to justify unless youre holding gold or something.

Don't post a response if you "don't have the time or inclination" You sound like a child, or maybe just a stubborn adult who thinks HE is always right. I'm interested in the research you have performed that would lead a person to break into a 100% 9 gauge thick constructed safe with a hammer, upright. Thats including 1/ 1/2 live bolts on all sides. Im sure that just sounds retarded to most tho. Actually, why don't you even find a video of someone prying open a "decent" safe, that is upright. With your vast research and claims of how easy it is to break a safe open, that really shouldn't be hard. i really hope people don't take your stupid advice and buy gun cabinets because they think they are just as easily broken into as a real safe installed correctly.

You're either not buying the right safe or not installing it correctly if someone is prying open a $1,500 dollar safe of medium size "as easily". At that price point, they should be cutting it open if its a small- medium sized safe, or at the very least have to work for a couple hours to pry it. What safe was it? I wouldn't consider a cheap gun safe to be a safe at all. And cheap isn't a price thing... all you need to look for is wall and door construction, bolt size location and engagement. Everything else prevents a drill/cutting attack. https://www.steelwatergunsafes.com/product/steelwater-xtreme-duty-2-hr-fire-hd593024/ I would LOVE to see someone open that with just a hammer, I would be still impressed if someone managed to pry open a 9gauge steel door standing up. EVEN if you managed to pry one side of the door, you will have to pry the other 2 with locking bolts on top and bottom.... You can check out thier video's that are pretty convincing.

If were on the topic. I know of at least 4 hunters, and probably more, who don't even vote. When we were talking about the recent bear hunt shut down on state land and all of their response was, we hunt private land, i guess were gonna get bears this year..... As far as i can see, the devide already existed.

I fail to see how calling out Fudds for their lack of interest in gun laws has anything to do with falling into a trap. I would love their support, but as I basically pointed out, they dont seem to care.. If it wasnt apparent, they seem to be the ones who dont want to hang together....

Well they're entitled to be morons. It's just further proof they want to stick their heads in the sand. If they can't acknowledge that black rifles are a hot issue because of liberal nonsense, then they continue to be part of the problem.

If you are hunting waterfowl, you are required to use non-lead projectiles. We typically use steel shot, however you can also get tungsten $$$$. This has been a thing for a very long time. Lead is used for a very specific reason, density... Using a safer metal means the weights of projectiles drops. If you're going to eat it, and have close distance shots, why risk lead poisioning?

I bailed at the beginning of the season when Negan was introduced. When heads exploded. You'd think the choices these characters made had no bearing on the fact its always life or death. Besides I couldnt stand Rick crying all the time. These people are so dumb it makes no sense how they survived this long.

That's really odd. I ordered some .308 from them at an amazing price, then someone gave me a coupon code for it, so I bought more. Through the the chat I was able to cancel my first order so I could buy it again cheaper, found out I needed to send my FPID info, and all was good. So I'm surprised they couldn't help you.

Pelican is running a nice sale on water tight cases, just say'n.

For AR, So I do the full length resize. I have all Milspec ammo that is just not accurate enough for my pleasure when going to the range. I'd like to see how close I can get to 1MOA out of my DMR White Oak Upper. I have a bunch of 68grain hornady Im curious to see how well it performs.. I have a couple super match boxes in 68gr to compare results. My m193 and m855 can sit in the closet for a rainy day.

I do need a single stage, but more or less so i can do a few more steps at once to check my work With out killing time. I end up doing single actions on the progressive anyway. I de-prime, and then clean in SS media. 1-stage Swage the pockets(once fired brass) 1-stage Resize Trim Progressive: Seat Primer, although i have the K&M hand primer I may be switching to. Drop powder Seat Bullet Factory Crimp

While NATO brass should have a crimp, i don't believe it is exclusive. There is plenty of .223 mixed in with crimps.

Some of the LC brass is staked, those seem to be the hardest to remove, or require more swaging. Others have a noticeable crimp, I have some wolf gold thats even crimped. Honestly, it looks like most of all are crimped. There is some Remington mixed in with, those dont have a crimp, when i see them i just skip the swage.

Its 90% federal brass, which are all crimped. Seems that every 1 in 30 pieces I get a primer that is super crimped, so far only Lake City brass is really giving me issues. for the 10% that may not be crimped, they run through the swager with little to no force...

There is no easy way to do this, you cannot clone a hard drive and expect it to function utilizing completely different hardware, You will have a driver nightmare on your hands. All settings will have to be manually changed, and all programs manually installed. The only thing you can do is transfer files. That can be done by either backing them up like sniper suggested, or finding a P2P sharing program through a network connection(far more complicated if you dont know computers well).

So i managed to get out of going to the in-laws today, wife has some family in town. We had them all over for the holiday on Thursday so i dont feel too bad. This was my day to chill out, and do some reload'n.... Welp, aint nothing that easy. So i've been getting the process down for reloading .223, which thus far has been a pain in the ass. I spent a few hours prepping cases just to find out I swaged the pockets way too much, actually crushed a few pockets. High primers on a few, and loose ones in the rest. I tossed about 60 cases at that point. So i got everything set and figure i might as well deprime the 2000+ cases i have, clean and swage them all correctly. About 10 cases in hit a primer that refuses to budge, a couple taps with my brass hammer had popped them out before, NOPE. Bent the damn pin, couldnt get the case out, finally popped it with enough down force on the press just to sear off the index pawl for the rotation of the LNL... nice! Need to order a few parts.. luckily midway has everything i need. On the plus side, the LNL swager tool seems to work nicely, i will say... less is more, rather a tight primer than a loose. just some lessons on the importance of checking your work at each step.

I dunno, he might be onto something, it's the reason I avoid Carney folk! Speaking of which, I'll have to add bearded women to my list ... The police can figure out if theyre actually women.

Is midget porn a disqualifier? I could have some fun with this.

DVOR is running sales on FLIR every couple months.

I've already got a shopping cart saved on one website, just hoping for a freeshipping or somthing tomorrow. The prices already seen, i cant imagine going any lower. The firearm market it saturated, thats the only reason these pre-sales are even a thing.. they are trying to move merch all week and not just over the weekend. I BET, that you wont see pre-sale items go any cheaper, you will just find more stuff on sale.