Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

vladtepes

Moderators
  • Joined

  • Last visited

Everything posted by vladtepes

  1. yeah.. had it been a 15 rounder they probably would have just been sent home..
  2. is a vortex sparc parallax free? as others stated... make sure the optic is tight in the mount and to the gun... if 25 yards is not happening.. shoot 10 yards.. get a center mass group and back off... shoot again.. then adjust.. don't adjust the optic like crazy.... are you turning the adjustments in the correct direction? are you adjusting constantly... the point others are making is this.. when you sight in an optic you shoot for group first... set up the optic.. put several down range at CLOSE distance... back target up.. shoot again... adjust... get consistent group.. back target up more.. until you have the gun sighted in where you want it.. an AR should NOT be all over the place at 25 yards..
  3. you will run out of 7.52x39 before any rivets loosen up..
  4. he is being conservative.. it is WAY more different than he is stating different meaning better.. ...
  5. X2.. what do I get out of it being milled... a heavier gun? no thanks.. ill stick to stamped..
  6. http://ultimak.com/ShortGasTube.htm
  7. ar15 no question.... an AR15 is good point blank to 300+ yards...
  8. don't bother it will only be in the way later..
  9. fits really nice... no issues.. you MIGHT have to make SMALL indent in barrel... mock it up.. there is a hex screw... lighten it up a little. make sure its snug... it will mark the barrel... take it all off and use a drill to make a TINY indent.. you are not drilling into the barrel.. more just making something for the hex screw to catch onto..
  10. in NJ? 3 boxes of ammunition... sorry.... lol
  11. I use kvar with a Dinzag lower retainer..
  12. probably looking into a sedan so I can have it as a long term car... I do a lot of stuff and need the extra room.. but thanks for the input..
  13. do you like it? I am looking into getting an 07/08 G35.... I am tired of having a needy toy and just want something comfortable with a little power..
  14. vladtepes replied to M1152's topic in AR Discussion
    the dynamic line of triggers are really cool because of the flat trigger surface.. I LOVE mine...
  15. I carry a gun EVERY day.... i never "forget I have it"... while it HAS become natural to always carry... I am always mindful that the gun is there..
  16. vladtepes replied to DTtuner's topic in AR Discussion
    mid length gas system > carbine length gas system
  17. the thing I think that I like the most about the Geissele trigger is the flat face of it.... i looked into Timmey triggers and actually ready some not so great reviews about them.. that is why I went with the Geissele
  18. vladtepes replied to M1152's topic in AR Discussion
    I'm not mad.. lol the truth is you had the ability to build an AR... they are like legos.. lol you really can't do it wrong... the trigger is easy.. just gotta take your time! you gotta have more faith in yourself.. I find guns extremely easy to work on... they are generally pretty logical.. and if you take your time you normally do not run into an issue.. the only thing I have done so far that has approached difficult was cutting the magwell of the Saiga for AR magazines to function.. and it was not even because it was hard.. it wasn't.. it was just that it was a cut.. test.. cut.. test.. process that was really touchy to get just right... just let me know if you have any questions.. but like I said I strongly believe a good trigger can be the make or break point in a gun since it is your direct attachment point to initiate function of the system.. sure you can aim wrong.. or hold wrong.. but the trigger is what actually initiates the shot.. so best for that to be as good as you can get it..
  19. vladtepes replied to M1152's topic in AR Discussion
    there is absolutely nothing wrong with the gun... the reason I built an AR was so that it would be EXACTLY what I wanted... also the mid length gas system is extremely soft which aids in follow up shots staying on target during rapid center mass shooting.. it is the right gun for me.. the M&P was not... this does not make it a bad choice for YOU.... the gun should run just fine... sights are definitely important if there will be no optic.. but the reason I said trigger is because it is the ultimate point of contact between you and the weapon system.. it is the point in which you are linked to it.. the smoother it is the better.. my Geissel trigger improved my shooting dramatically.. i am interested to what they say about ammo... my take has always just been it is dirtier slightly less accurate.. and puts a little more wear on parts like the extractor... but please post their response I am interested to what they say..
  20. vladtepes replied to M1152's topic in AR Discussion
    i dont shoot 7.62x39 anymore... streamlined my systems.. http://njgunforums.com/forum/index.php?/topic/37805-pmags-in-556-saiga-win/
  21. I made a slight slant into that piece so the bolt carrier would ride up over it on the last shot..
  22. vladtepes replied to M1152's topic in AR Discussion
    I shoot federal XM193 out of my AR AND AK.... if cheap steel ammo was cheaper I would shoot it out of my AR for center mass drills.. the consensus is this.. cheap steel cased ammo is dirtier and of less quality the does not perform as well... also the hardness of the case may wear or damage the extractor prematurely.. is it a 556 or 223 upper.. with all due respect I would not have gone this route for an AR... mid length gas system is amazing.. I had an M&P, and it was a GOOD gun.. quality was fine.. but it does not even come close to my home built rifle... I strongly suggest a good trigger the difference is amazing.. it is likely the single most impacting upgrade you can do..
  23. I am no expert on this weapon system but knowing the threading would be a good start...
  24. If that is the case then why argue when you are given the answer.... "I think this is illegal" "It's not because of this" "I still think its illegal" "The wording clearly says this" "We'll your not a lawyer so I don't trust you" "I don't need to be a lawyer a lawyer can only give opinion. If there is no case law... I'm telling you the facts as they are writen not as interpreted" "Yeah I don't know" It gets to the point of ridiculousness... You may have been shooting for a 100 years... I'm just explaining the rules as they are written...

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.