Everything posted by vladtepes
-
Birdshot for HD? VIDEO!
take a watermelon and throw it on the ground..
-
How many lower receivers can I buy...
they are going to assume you are starting a militia and drive tanks into your home...
-
anyone have a ACE Entry stock I can try?
+1 I found it very comfortable while wearing armor and a mag rig...
-
Looking to build or purchase an AR15
keep in mind the price he did for the break down of my gun includes a $400 optic.. a $150 flash light setup.. and a lower that is admittedly $150 more than it needs to be.. that in itself is $700.. sop you can BUILD the GUN for a little over a grand.. give or take.. thanks for the price break down! it is pretty accurate..
-
Choosing semi-auto AK 7.62 rifle
it takes me approximately an hour to convert a Saiga.. hardly an earth shattering event.. I know some people are more busy than me.. but clearing out an hour is not really the end of the world..
-
Birdshot for HD? VIDEO!
so you say.... I would not trust peppering some potential face eating zombie with rock salt size lead.. when I could instead chuck a handful of much heavier lead that is PROVEN to stop... there is no doubt birdshot at close range would stop MOST individuals.. the problem is the operative word MOST.. buck shot on the other hand WILL stop them..
-
Looking to build or purchase an AR15
Not sure total cost but I am sure you could do a similar build for the base gun well within your budget...
-
Looking to build or purchase an AR15
this is my gun... and the groups it has shown me just in sighting in.. one is a 3 shot group.. the other is a 30 round mag... both done from a bench... approximately 75 yards... you should build your own gun.. they are like legos... AR15.com Lower Magpul MOE + grip Spike’s ST-T2 Buffer Magpul CTR Stock Magpul Pmag Magpul MOE Magpul Rail Section Larue index clips Troy Rear DOA BUIS Aimpoint PRO Haley Thorntail G2 Mount Surefire G2 light Magpul ASAP Magpul MS3 Spikes Tactical Upper 1:7 Twist 5.56 Mid-Length Gas System 14.5in Barrel Spikes Tactical Dyna Comp Muzzle Brake (Permanently Attached)
-
Looking to build or purchase an AR15
brand is only a fraction of the equation.. 150 yards with an AR is next to nothing... 14.5in mid length gas system FTW...
-
Looking to build or purchase an AR15
What you want to use the gun for will determine the system that will work best for you... What EXACTLY do you want the gun for... Long range? Close range? Precision? Urban combat? Night shooting? What you plan to use it for will determine the gun and options needed... It is actually very simple...
-
AR Upper To Lower Play
this is what I have.. http://www.midwayusa.com/product/339281/jp-enterprises-rear-tensioning-takedown-pin-ar-15-silver
-
AR Upper To Lower Play
my DPMS in 308 has a fairly tight fit.. BUT someone replaced the rear pin with like a pin that you can tighten... which make it not move at all.. something like that might help your situation.. I would not personally rely on tape or anything like that to remove play.. I am NOT being "snobbish" or anything but for me it would have to be something more reliable.. I am pretty sure you can fix it because it is not that uncommon of an issue..
-
Valkyrie armament?
in NJ a disassembled HI capacity AR magazine is illegal because it has the potential to feed more than 15 continuous rounds into a semi automatic weapon... BELT guys will argue what I am about to say.. and no there are not any convictions I am aware of.. BUT.. IMHO 16 links would essentially be a disassembled high capacity magazine.. thus illegal.. 15.. would be fine.. but back to the whole belt fed AR.. I can buy 100 round beta mags for a couple hundred bucks each.. and they are entirely self contained..... so what use does a belt fed AR provide?
-
Storm CX4 discontinued ?!?!??!?
interesting considering I JUST sold my cx4..
-
Zombie lost its fun factor?
if you don't know... lol AK series selector..
-
Primary Arms Red dot sights?
depends on your eyes.. depends on the target... and it depends on the degree of accuracy you are seeking... as in.. at 200 yards... a red dot is plenty adequate to hit 12in steel plates... but at 200 yards if you are trying to do bullseye shooting a scope might be better... it really depends on what you are trying to do.. what distances..
-
Question about sighting in an AR
I view gun as a complete system.. a system comprised of all the components.. if I am personally given the option of immediate gratification of a "$60 red dot today" I will take that gun.. and throw it in the safe.. till I can afford what I really want.. if I am really set on a $400 red dot.. then that $60 puts me that much more in the hole.. patience is key to building the perfect system.. one that fits the shooter and his shooting style best.. I hear what you are saying.. but honestly.. I would definitely wait it out! and get the best you can afford that fits your style..
-
Choosing semi-auto AK 7.62 rifle
this is the answer I give all day every day..
-
Extremely graphic .....Crime scene photos from zombie attack
people are driven by impulse.. driven by the things inside them.. not always logic.. I am willing to bet the "couple shots in the back" were played up significantly in court... moral of the story? carry a round that makes a big enough hole that you are not emptying a magazine to stop the threat.. I don't care how high you are.. if enough blood comes out quickly enough.. down you go..
-
Saiga Project
my 7.62 gun is technically gone.. all the parts stayed behind.. just the gun itself is gone.. I have a 223 coming to replace it.. I was always a firm believer of the potency of the 7.62x39... BUT the potential issue of supply has finally gotten to the point of concern, and with the recent decision being made to eventually pursue a 300 blackout SBR I really have no need for a 7.62x39 gun.. but with still having love for the AK platform I have decided to jump back to 556.. both AR and AK chambered in 556.. a 308 AR with an optic.. and 300 blackout SBR.. that is IMO more than I will ever need for any situation... and are all domestic ammo.. and I am honestly starting to drink the 556 koolaid.. I know I have been one of the most outspoken against it.. but I am not sure.. I am starting to rethink that, and think it is a viable round.. and if for any reason it is not enough.. 300 blackout would be.. and well if that is not enough.. 308 will do it.. so I essentially say good by to 7.62x39 and part with the Saiga that started it all for me.. I am sad to see it go.. but feel it is the most logical choice.. I am not a huge fan of caliber diversity (from a financial standpoint)
-
Primary Arms Red dot sights?
two totally different applications.. red dot - fast move and shoot rapid multiple target engagement... with giving up some precision, and sacrificing maximum range scope - putting holes in holes.. slightly more accurate.. increased distance due to magnification.. giving up speed and rapid transition from target to target.. there are exceptions and varying degrees.. for instance.. a 3x scope will be far easier to transition between multiple targets when compared to a 16x optic... when compared at 100 yards..
-
Saiga Project
funny you say that.. about 223 that is.. lol "told ya so" LOL
-
Extremely graphic .....Crime scene photos from zombie attack
I carry a gun every day (ironically loaded with zombie bullets... they were out of the normal honrady loads I buy and the "zombie" ones are close enough)... anyway... I would intervene without question...I would only tell him to stop and get on the ground once, and if that didn't work I am fairly confident that I could justify shooting someone dead who was eating off the face of another human... "so could you tell us why you felt the need to shoot this individual" "when I came across the situation and saw him eating his face.. I pointed a loaded weapon at him and told him to stop..he completely ignored me and continued to eat his face... it was obvious at that point immediate action was needed.. there was no option to wait... so I shot him.. the end.." I am not interested in playing hero.. or cop... but I could not just stand there in a situation like this....
-
Question about sighting in an AR
if I asked you your opinion.. about something you were knowledgeable about.. you provided that opinion.. you provided the reasoning behind that opinion.. but yet I continued to do something totally different.. would that not frustrate you.. a cheap red dot performs poorly in one KEY area.. some of them hold zero inconsistently.. that means today the red dot shoots good groups.. and tomorrow they are up and left.. so you waste another box of ammo re zeroing the optic.. it holds for a trip or two.. then it is down and left.. waste another box or two.. wasting time doing the SAME SHIT all over again.. it holds for 5.. 6.. 7.. 15.. 20.. range trips.. then all of the sudden it wont even turn on.. my time is valuable.. it is worth more than the 40.. 50.. 60 bucks I might save on a budget red dot... especially when you consider the ammo and time wasted chasing zero.. so see that is the issue.. I TELL you in DETAIL why it is the way it is.. and you literally ignore every word I type.. so it gets to the point where I say the following.. if you are NOT going to listen to us.. if you are NOT going to try to understand the principals behind this stuff.. why are you wasting our time.. we LOVE shooting.. we LOVE helping new shooters.. we LOVE educating.. we do NOT like to waste time.. time is money.. and time is valuable.. so stop wasting our time.. and stop wasting your own time.. it is irritating.. let us help you.. lol really I can not stress enough.. it is NOTHING personal..
-
Question about sighting in an AR
of course you did.. you asked for our opinion on Primary Arms.. we told you a quality sight (Aimpoint, Eotech etc..) was the best.. we told you that a middle of the road optic was a good compromise (Primary Arms) so it is of no surprise to me that after asking for those opinions.. and getting answers.. that you went out and purchased a NCstar, or BSA red dot... because that is what you tend to do... ask an opinion... get a solid technical answer.. and then do something totally different... SORRY but.. I really do not understand.. The next time you ask a question I am going to give you the most ridiculous wrong answer with the hopes that you will run out and do the complete opposite, and end up with the correct solution.. and just to be clear.. I was not indicating the rail was clocked now.. I was indicating that as you shoot and wrench on it with your support hand it will likely get loose over time and once that happens.. you will begin to lose zero.. unless of course the rail proves to be quality.. but I am not familiar with its performance.. the advantage to a barrel mounted or gas block mounted front site is it is independent of the stress you may exert on the rail..