Everything posted by gunnyr
-
Saiga Conversion Information
Or can't drill straight...but from what I've heard it's the initial process that can really hose you up if the bit walks. Even going slow, once it bites into the steel and walks it can really make it hard to get the part centered. Does a punch even help against this part or is it too tough?
-
Saiga Conversion Information
Yep but take your time and get a drill press if at all possible. That $15 part can easily turn into an expensive receiver repair. There is one guy at the saiga forum who swears that using JB Weld on his bullet guide was good enough as it is a non-stress bearing part. All I can say is that I'm glad that's not my rifle...
-
7.7 Jap ammo
Grafs has a bit more selection but they are currently out. I have a 7.7 as well and I think investing in some dies is the only way to feed this thing. That and a bunch of 30-06 brass.
-
South Jersey Shooting Club 3 gun shot 3/20
Hell yeah I should be there for this one. Maks, there are three shooting stages (1 for each weapon but multiple targets per stage) and we got to run through them at least 4 times. So figure on having enough ammo for at least that number of runs. Chris, hope to see you there!
-
Hi Point Range Report
You know that, I know that, and most anyone that's been around firearms will know how to shop for a bargain. But a first time owner with more desperation than money? Or how about someone buying from a small and remote shop where they have to order everything therefore the customer better know exactly what they are looking for? Anyway man I'm just trying to throw it out there as to why anyone would buy one. And apparently there are a lot of anyone's as this company is doing well. They serve a niche of firearms users and apparently they serve it well. Let me put it this way, I wish KBI in Harrisburg had been able to achieve the same level of success. Granted those guys were importers but they had some good stuff (Charles Daly and Jericho).
-
Hi Point Range Report
Not speaking for the OP but what if this is all you could afford? Granted, you could save a little more and get a used Glock, S&W, what have you but in the event of any of those second hand guns needing repair, you are footing the bill. So if money is so tight that this becomes an issue, the lifetime warranty becomes a huge plus. Lastly, I have to give this company props as it's able to manufacture domestically but keep prices at China slave-labor levels. In order to do that they've skimped on just about every place that they could get away with and I can understand that.
-
Hi Point Range Report
LOL!! Yeah, I wish I was an "Industry Professional" with that all important "Real World Experience"! (BTW that's my serious face I'm wearing. Because everybody but the idiot behind the camera could smell the ambush...)
-
Hi Point Range Report
The abundance of information generally coming from people who don't own a highpoint. Because google highpoint and any of those terms (e.g. reliability and/or accuracy) and you'll get a bunch of hits where owners are praising the highpoints. I should know because I did the same thing when I was trying to make up my mind on whether or not to get their 45 carbine (which I did). I wanted a 45 carbine and didn't want to pay HK's or Beretta's ridiculous prices for one (didn't know about Taurus at the time). In the end, I decided that highpoint had a good enough reputation for me to warrant paying for it and trying it out. The line about the "serious shooter community" almost made me spill coffee all over the place while I laughed. I mean really...talk about being pretentious and mall ninja-esque!
- First hand gun
-
Saiga illegal?
Seems to be a bit of confusion here regarding almiz's SGL24. It is a Saiga but it has already been converted by Arsenal Inc into a pistol grip config. I believe they use KVAR components and the price of $750 is about market price. All the Arsenal Saigas come this way. So the SGL24 isn't the stock $350 - $400 Saiga with the craptastic trigger that should be converted as soon as you are done test firing it.
-
Got Engaged Yesterday...
Congrats man!
-
USANA LIVES!!!!!!
PM sent. Definitely interested.
-
A good early morning laugh
How the hell did you find this? The milk reviews are hilarious.
-
Firearm transport while on foot (without CCW permit)
My opinion: Walking from the shooting range parking lot to the facility = reasonable. Walking out of your house to some nearby location while carrying your guns = not even worth contemplating. But again, that's just my personal opinion and preference. I would rather spend my time and money buying guns, ammo and shooting than on a lawyer to test the limits of state law.
-
Interservice Rivalry - Marines vs Navy
Back in the late 80's and into the mid 90's there was at least one unit that had a batsh!t crazy Marine who didn't give a damn about regs, knew that he wasn't going to go down like those gate guards in Beirut, and stashed at least one mag of live ammo on his person whenever his issue rifle was drawn out of the armory. Where do you stash a fully loaded mag you ask? Easy,right next to the unloaded ones in your deuce gear. Funny enough, when this person became the unit radio chief, he was required to carry security rounds for the crypto gear. It's a mad, mad world I tell ya... Anyway, here's a little treat for all my Marine brothers out there. Semper Fi!
-
Tactical slugs, sabot rounds, and the like
The Box-O-Truth stuff is not to be taken literally. Look at how closely those drywall boards are stacked next to each other. Is there a house anywhere with architecture designed like that? What it fails to take into account is that as soon as shot (or slug) meets resistance, it starts shedding speed so that by the time it impacts the second series of drywall (e.g. 8 feet or so away in a real home) it's traveling at a significant slower speed than if the drywall was right next to each other. I'm not saying their study is to be completely dismissed, just saying that it's not as "real" as people think it to be. That space between each series of obstacles is significant because the speed drop within that space has to be accounted for.
-
Tactical slugs, sabot rounds, and the like
Centurion Multi-Defense (aka Buck and Ball). Kills zombies dead (again).
-
SIG 556 coming out in 7.62X39
If I had the money I'd buy this in a heartbeat. 7.62x39 goodness in a Swiss engineered (and backed) platform = win. I do have to say the short length of the mag release tab relative to the distance to the mag catch (farther than most AK setups) makes me think that you really have to bear down on that thing to get the mag to release cleanly...but that's just conjecture on my part.
-
HMMMMM
Sounds like you're doing the right thing. If you get the AK I'd get a Saiga. Good bang for the buck and you can convert it to standard AK config in no time. Also, shooting an AK lefty is pretty easy as all the controls are on the right side.
-
Glad to see the body scanners work
You guys know that former Homeland Security Director Michael Chertoff is part owner of the company that makes these scanners?
-
Competition Season About to Start
What's the Frozen Nutz shoot all about?
-
Why I'm NJ ZED commander-in-chief
Hmmmm....first time I've ever heard "heavy" and "9mm" paired together before. Kinda reminds me of jumbo shrimp.
-
Starting em young
I think of this as "Dating Interdiction 101".
-
ZED South Team. Check in here
Thanks axeman but I have to admit I'm guilty of as much a$$hattery as anyone here...maybe even more. I won't know about those dates until the end of February when my wife's schedule goes out (she's a nurse).
-
ZED South Team. Check in here
I've been wondering what this ZED stuff is all about... Anyway I'm checking in with the south team. My qualifications are as follows: Marine Gunnery Sergeant (former) SASO Instructor (CQB + COIN) Expert Rifle Expert Pistol Shotgun Crew served weapons Call For Fire (Hey,you never know) Comm (former comm chief) Significant Awards: CAR Ubercool Team Motto Suggestion: Australis Victus Mortuus Interfector (Southern Walking Dead Killer)