Everything posted by Silphidae
-
IDPA. Saturday. 3-8. South Jersey
You don't need a lot to participate the first time. You need a holster, magazine holder, 3 magazines , know how to safely handle your pistol and a willingness to listen to direction. Show up early so you can get a personalized safety briefing, introduce yourself and ask questions. They will put you last so you can see what's going on and gain confidence before you shoot. What are you shooting?
-
UTAH CCW?
Took Utah on January 4th or 11th (can't remember) and received it on February 28th.
-
Single Stage in addition to Dillon 550b - what can I use it for?
What is push through sizing?
-
Single Stage in addition to Dillon 550b - what can I use it for?
Ok, I'm getting a Colette puller, recapping die will save it for the .223 in batches. Keep suggestions coming if you have them.
-
Single Stage in addition to Dillon 550b - what can I use it for?
I have an uncle that gave me a Dillon 550b set up for a great price. He now is going to give me all the rest of his supplies, including a Rock Chucker. What should I be using it for in addition to the 550b? I currently have the Dillon set up with complete quick change kits for 9mm, .38 Special and .45 ACP. I do have a current issue with the .45 ACP - the brass I received was stainless steel tumbled and too clean, in the belling stage the die sticks pretty bad and there's some brass build up around the neck of the belling tool. Otherwise, the Dillon has been a dream. I'm open to ideas where the single stage may make my life easier. I have 1,000 pieces of .223/5.56 brass that I will eventually start reloading.
-
Post Your Used Pistol Targets!
Finally worked up a load for the 1911. Settled on 200 grain LSWC with 5.9 grains of Unique. OAL at 1.25 pushing 865 FPS average over 10 shots. First target is 6 shots at 10 yards and second target is 7 shots at 25 yards using bench as a rest. I'm going to go with these until I run out of powder and forced to change (anyone want to sell some Unique powder?).
-
Comptac paddle holster - inside the pants or just around the belt?
It's strictly for IDPA use and I like to shoot multiple divisions so paddle works better. I'm just not sure about the inside the pants thing, seems counter intuitive.
-
Comptac paddle holster - inside the pants or just around the belt?
Just received my new comptac international holster for my X-Tac with the paddle configuration. I have an older comptac version that I've used for my glock for years and always put the holster between my belt and pants. When I ordered the new one the tech told me I should have it between my skin and pants. Tried it and it seems more secure but I don't know if I like it. Pros are it seems more secure. Cons are it's much harder to manipulate, harder to put on and off and I can see it wearing out my pants earlier. How do you use yours?
-
Upcoming Oaks, PA Gun Shows 2/7-2/9 and 3/28-3/30
No worries, appreciate the leads. It's great that everyone is so willing to offer suggestions.
-
Upcoming Oaks, PA Gun Shows 2/7-2/9 and 3/28-3/30
No powder that I wanted, very limited handgun section. Also no steel targets.
-
Upcoming Oaks, PA Gun Shows 2/7-2/9 and 3/28-3/30
Thanks.
-
Upcoming Oaks, PA Gun Shows 2/7-2/9 and 3/28-3/30
Let me know where via pm if you prefer. I've tried x-ring, delco and locks with no success over the last few weeks. My hope is to find N320 which has not been an easy task or W231 in large quantities. I hate buying small batches and having to work up new loads. Thanks for the tips and the dollar off coupon.
-
Upcoming Oaks, PA Gun Shows 2/7-2/9 and 3/28-3/30
What's the name of the powder guy? I'll be there by 2:45 waiting in line and would like to know where to go once I'm in.
-
Upcoming Oaks, PA Gun Shows 2/7-2/9 and 3/28-3/30
What's the chance of finding powder?
-
Glock or M&P
Shoot 'em both before you decide. I went with the Glock 17.......then a Glock 34........then a Glock 26. Still hate shooting any M&P but not nearly as much as I hate shooting the XD platform. Pick the one that you shoot best initially, stick with it and you'll never look back. (Although you should pick the Glock). Why the 17? The 26 is for carry, the 34 is for IDPA and range use. The 17 hasn't been shot in a year and sits in the safe as a HD weapon, it does everything ok but doesn't excel in any one category IMHO.
-
G19 with RMR
What's the thought process for selecting iron sights in front or in back of the RMR? Also, which one did you get and are you happy with it so far? This could be a fun project.
-
safe
I just reorganized my safe this am as well. Used thread spools to get the handguns on the door, looks great and cheaper than the more professional jobs......total cost of $3.89 plus a few screws.
-
VV N310 & N340 In Stock at PV
Have you used 310 for .45 and how close is it?
-
Some fun on Facebook
What's wrong with Coors Light and ARs?
-
Slug Question 12ga vs 20ga
I would guess its similar to wad cutters vs round nose bullets. The wad cutters (flat bullets) make a much larger and cleaner hole than a similar sized bullet with round nose. While the 20 Ga is 3mm less in diameter it may just make a nicer hole compared to your pointed 12Ga slug.
-
Good truck cap...
Have the BakFlip and it's awesome.....although not what the OP asked for I'd recommend it for its versatility. Friend has a hard cover and we use my truck more than his because he hates taking the cover off to accommodate bigger items. BakFlip gives you 100% of your bed if needed by folding it up against the back window.
-
Show us your 1911's
Finally bought one, looking forward to shooting first idpa match with it soon. I was on the fence between this and a GI No Name, this one just called out my name....no nonsense reliable idpa machine. I love the sights as they are similar to my sevingy I run on my Glocks. Working up loads for it tonight and hope to fully break it in this week.
- Eagle Arms Show
-
Eagle Arms Show
Any dillon reloading stuff? Looking for a 550b quick change and .45 ACP dies for my new gun.
-
Good knife store
Try this guy in williamstown. Has a good selection of ZT, Spyderco, Benchmade and many others for decent cash prices. I picked up a Spyderco Sage the other day and he quoted me a very fair price for a mini Griptilian. The son is also a gun owner, which makes supporting him even better.