Everything posted by Vlad G
-
Scope for 3 gun
I'm pretty sure that's not how scopes are used, but whatever works for you.
-
Scope for 3 gun
Sure, but Old bridge and Easton are not the only matches one might want to ever shoot. Personally I wouldn't build a rifle for a specific match, once you leave this immediate area shots to 400+ yards are a thing that you see. Also the stupid skinny self reset targets, at 45 angles at 200+ are a thing. I'm not saying there is anything wrong with red dots, my zombie gun has one, I'm saying that if you want an optic for 3gun or any 0 to 400 range game, there are better choices. If you just like irons or red dots that's fine too, I've gotten spanked by much better shooters shooting red dots at silly distances.
-
Scope for 3 gun
What? Why would you ever adjust the objective beyond the setting up for your eyes?
-
Scope for 3 gun
Hi Stu, there is a reason you saw lots of use the 1-6x scopes. They really are the right answer. If you want with a magnifier setup they end up weighing just as much, and are more complicated. Go for the strike eagle.
-
Clamp on muzzle brake
My experience with clamp on muzzle breaks is poor. They don't just hang out there, by their design if they are any good they are actively trying to pull themselves off the gun. In my opinion, thread the barrel or do without.
-
AR-15 Rail - Need Help
Also new barrels aren't that expensive depending on your needs, which means you don't need to sell the entire gun, just by the parts you need and build it on the rest of the gun, or have someone else do it for you. To me, the retrofit type handguards do not present enough savings to use them over a more purpose built arrangement. The other things is ... what accessories do you guys want to attach to it? Personally a white light and a sling is all most rifles need and those two things don't require complex upgrades. Don't get me wrong, I'm a huge fan of free float handguards, if I was going to use something like the two piece arrangement .. I dunno I might stick with a magpul replacement handguard, attach a light and a sling and spend the rest of the money on ammo.
-
More Sandy Hook BS, gun makers sued
Point of order: why wouldn't they be? The judiciary is a branch of the government (which is why I'm amused when we expect judges and the SC to save us from governement abuses) and as such just as likely to be involved in the political process as the other two branches. I think that considering them apolitical is what gets us in trouble and breaks our expectations.
-
More Sandy Hook BS, gun makers sued
My reading is that it isn't so simple. If what I'm reading is correct the court refused to dismiss the case for lack of jurisdiction, because they believe they have it. So far the "don't sue the gun makers" laws haven't really been brought up on the conversation.
-
AR pics, lets see'um!
And another thing about it is that it doesn't change the manual of arms if someone else uses your rifle. Everything still works the way it always did but having the extra ability to lock back the bolt or drop it during a lock back reload is really quite wonderful.
-
AR pics, lets see'um!
It is a bit strange when you shake a box of parts and accidentally an AR falls out. My only problem with that is that usually the parts in the box are parts I've decommisioned or decided not to use for a reason, so then I end up with rifle made entirely of parts I don't want
-
Easiest shotgun to maintain/clean?
Yes I kinda meant both. There are fewer options for left hand ejection and I know a bunch of lefties shooting right hand ejecting guns just fine. It seems all the major manufacturers make some form of left hand ejecting shotgun, but how often do you see one?
-
Easiest shotgun to maintain/clean?
Sadly your requirements are working great with each other. Left side ejection isn't really a thing. Downward ejection might be answer if you want a M37. Otherwise if being a lefty is biggest concern then double/single type guns are your thing Next lefty issue is control locations, which brings up the mossberg safety location. Other guns have safeties that can be flipped, I think. To me this wouldn't be a killer feature as you can train to use a wrong handed side safety. For example I have multiple shotguns with the safety being a trigger finger actuated button and I have to reach around the trigger guard to put the safety on all the time. With a bit of training that doesn't really matter and becomes second nature Reasonably priced is subjective. Almost any shotgun can be used for hunting with the correct loads, so that shouldn't matter. Easiest to clean maintain would be pumps like the 500 and 870 or inertia driven semi-autos (Benelli M1/M2, Stoeger M3000, Browning A5) etc. Gas guns like the 1100/11-87/versamax/SLP/etc will require more attention but this boils down to what are you going to do with them? If hunting means 1000 shells a day on doves in Argentina then how long a gun runs before it gets caked in crud matters. If you can spend 10min cleaning it after every 100-300 rd fired then it doesn't matter so much. I used to think pumps were better for self defense because the internet said so. Over time I've seen a lot of people fumble and short stroke pumps and I've seen a lot of semi-auto's run flawless for thousands of rounds. If you made me pick a shotgun as my only one gun for defense, hunting, sport I would probably pick an M2 if money was no object or a M3000 if money was an object.
-
AR pics, lets see'um!
Well .. I'm not really concerned about the weld so much, as much as I'm concerned about hanging a pile of weight from the end of the barrel. Is your sling mount attached to it as well? I normally think that adding weight to the barrel and placing stresses on it is not an ideal setup, but maybe I'm not understanding what you were going for. If it works for you, thats great.
-
AR pics, lets see'um!
Am I seeing things or is your flashlight hanging onto the end of the barrel?
-
Easiest shotgun to maintain/clean?
Also shotgun for what? Defense? Hunting? Clays? TEOTWAWKI? Big Game? 3 Gun? Cowboy action? Ridding shotgun on the Pony Express?
-
AR-15 Rail - Need Help
Like everyone else is saying, they both should fit on the upper receiver. Putting them anywhere else is horribly wrong.
-
Easton now three gun only as of march.
Sort of, this is why I like the ELS setups I can swap stuff around. I can fit 20rd of shotgun, 3 pistol mag pouches, and 2 rifle pouches plus holster under the normal config. I can start removing rifle/pistol pouches and add more shotgun stuff if that is the required load out. If it is a shotgun only stage and it is one of those 30+ round jungle runs some matches like to throw into the mix, then I can remove my pistol holster and I have another 8rd caddie that fits in its place. Also in most 3gun matches the location of the ammo is not specified so pockets or chest rigs are also an option.
-
Easton now three gun only as of march.
The only time you can have to much ammo is when you are swimming. I can and add and remove caddies as needed from my belt as the stage dictates, but I like to have at least 4-6 rounds more then I plan on using. At the minimum I'll have 12 rounds but if you make me I can have 38 in quad loading caddies and 6 more in a old fashioned straight caddie. Realistically 16-20 will do you for pretty much any stage if you don't miss a lot of fumble your reloads too much.
-
.223 bullet question
Interesting, what velocities are you getting with that? Based on their data it looks like I may have to go a bit off the chart to get the velocity I want out of a 18" barrel and I don't see 5.56 data on their website.
-
.223 bullet question
It all depends. Everyone has favorite recipes and each gun has favorite loads. You are simply going to have to experiment. For me, and my specific needs, I have found that the 69/68 gr bullets are easier to deal with (I can drive them harder and faster to a ballistic path I prefer) then 77gr. They are easier to deal with when it comes to seated lengths as well. For my money the 68gr Hornady's are a very good option. I can't tell the difference in performance between them and 69gr Sierra's, but my requirements are maybe not as strict as others, as long as they shoot sub MOA and I can drive them at 2850fps I'm happy. For powder I found that Varget is probably still the king for accuracy, but it is a pain to deal with. I like to load progressively and Varget measures like crap in my Dillon powder measure, it does not stay consistent due to its form factor. For me, a second best powder has been Ramshot Tac which results in accurate ammo, flows really fast and consistently through the powder measure and allows for very fast loads without excessive pressure.
-
9mm Ammo suggestions!!!
To 9 specifically the issue was with their new stuff, which is the brass with the odd internal shelf. Now, if that is something they didn't do before or they no longer do now or if they only use that for some ammo but not other I have no idea. I've seen that brass separate.
-
9mm Ammo suggestions!!!
I have seen a lot of freedom ammo fail. I have seen their .223 have head separations. I have seen their .308 split cases in half and have web failures. And I have seen their 9mm break in half at that strange internal shelf they have inside their cases. Your millage may very, shoot whatever you wish in your guns, I wouldn't put a single round of their ammo in my guns.
-
9mm Ammo suggestions!!!
I would stay away from the very cheap brands like Freedom and Independence they tend to make shitty ammo in their entry level ammo. I would suggest looking at PMC, Magtech and S&B on the lower priced spectrum and start saving your brass. If you ever decide to load your own you will have a pile of brass to use, and if you don't you can sell it to someone who does. Also, buy in bulk and don't bring it all to the range, give yourself an ammo budget for the day and only bring that, it is is really easy to shoot it all in one day .
-
Training for matches in NJ
I have yet to hear any of the top shooters express anything but doubt about any of the laser training thingies. That doesn't make them worthless, I just have my doubts about them.
-
FN 15 Tactical Carbine Thoughts?
Well I played with some of their guns, although admittedly they were demo guns so they probably made sure they were right, and they seemed very well made indeed. If they are actually letting shit out the door then that is a problem, I just don't think that is their style. I will however say that the last 6920 I've seen at the range, was basically the worst feeling AR I've shot in a long time. 8 lb trigger, rough all over, etc. It worked, but it was about crummy an AR as I'd expect to have seen from Bushmaster during the worst years. I felt bad for the dude who was proud of his Pony gun, but couldn't shoot a group to save his life and thought it was him. I had to break it to him that no one could with a trigger that felt like it was crushing gravel with every pull. It is possible that everyone makes shit products and good products and we are all seeing the different days.