Everything posted by Vlad G
-
Reloading Group Buy - Part Trois
You can run SRP instead of SPP's but if you are running low pressure loads you may end up with gas blowback past the primer and some breach face erosion. if you are running higher pressure loads, then it isn't an issue. Of course, lightened hammer/striker springs might not light them up. Personally, I've used all the small primers with no side effect in pistol loads, small rifle, small magnum, small rifle magnum, etc. The only primers I have ever found to be problematic were a strange batch of VihtaVouri primers which I've only ever seen ones, and only used once and they were like shooting sparklers out the muzzle and about 1 in 10 wouldn't go off.
- Pump Shotgun Capacity
-
Pistol Primers
We are still allowed to cross county boundaries, right? Also, if you are serious about reloading, ordering 5000+ at a time online is the cheapest way to get primers even with hazmat fees.
-
7 Shooters You Know
That was kinda funny. I'm at least 2 of them
-
The best $25 ever spent
The AR platform has changed a lot in 30 years. The cool thing is we can choose which upgrades to the platform we prefer and make it our own, but the rifle is much different today then it was 30 years ago I can see how it might be an issue if you wear gloves a lot. I have large hands and I never noticed it crowding the trigger guard, even when wearing thin gloves. With heavy winter gloves maybe it is an issue. Check your bolt catch spring. A lot of the bolt catch springs are marginal to start and the moment you add some weight to the button it no longer has enough oomph to keep the parts in proper alignment. Good news is it is like $2 for 3 of those springs at brownells. For my money, the BAD it goes on every rifle.
-
Post Your Tactical Shotgun Pics
Some 500's are parkarized. My originally Persuader configureed 500 is park'd.
-
Trenton pork roll festival
Where else, legislature knows all there is to know about pork.
-
School me on 1911 guide rods
Check your extractor. In my experience at least 50% of 1911 issues are extractor related.
-
School me on 1911 guide rods
I've used both short and long recoil guides and I don't find the difference in take down to be meaningful. For some guns, specially looser fit ones, the long guide rod makes the gun feel smoother or tighter then it really is. The additional weight is indeed a thing but I think most people won't notice the difference when they are shooting factory 230 ammo.
-
5/22 Old Bridge First USPSA Match
Vinnie, I'm glad you had fun, it is addicting. Don't worry about the pending bit most of the time that comes from someone who signed up LAST time and didn't get their number yet.
-
Heads-Up / Anti-Gun Newspaper Buying Gun Forums
Problem is that with groups like this they are buying the content and specify non-compete clauses in their contracts.
-
SA vs. DA/SA handguns
I agree with you that if sufficient training is applied any platform can perform equally. At that point it becomes a matter of shooter preference. But as you mentioned training people to be minimally competent with a striker fire guns is quicker, and lets face it, lots of training is about minimally competent. I guess the question raised to me by the original topic is should "we" switch back to DA guns because they are safer with less training or stay with striker guns because they are easier to train to competency with less training? Assuming sufficient training there is probably no difference. Framing the question differently, lets forget police training for a bit, and look at a CCW course in a medium-free state that shall issue one after 8 hours of training. Odds are 4-6 hours of that training are in a classroom talking about laws and storage and such. If you are lucky you are talking about 4h of range training which may be ALL that person will ever receive as training before they are carrying a gun. Would that person be better served with a DA gun that may be safer for everyone around them or with a striker gun that they may be more competent with if having to defend themselves? I think that is where the hard question hides, because someone operating at the higher levels of proficiency has a much different set of concerns.
-
SA vs. DA/SA handguns
I don't buy it. Todd Green and Earnest Langdon have been pushing this lately in various media (Well not Green anymore, but you know what I mean). You can listen to Langdon go on about it at some length in an interview with Mike Seeklander on the American Warrior podcast, it was a very good conversation. I'm not saying they are wrong, I'm saying they are biased. I think if you are a professional or competitive shooter, someone who spends a LOT of hours with a gun in their hands, you have the luxury of choosing exactly which fine aspects of the shooting arts you want to select for. I have no problems shooting DA/SA guns, having shot a CZ for like 7 years in USPSA. But given a choice I'll shoot a SA or striker gun. My reasons are very specific to me and my needs and while not blind to Greens and Langdon's arguments I find them not relevant to someone who is reasonably well trained, or at least less important then other components playing into it. The argument that a DA gun is safer for a new shooter that needs to carry a gun is probably correct, but it is quickly countered by the training requirements. The proponents of DA guns don't deny that striker guns are much faster to train a new shooter (cops included), or at least getting a new shooter to a certain acceptable level of skill. They argue that in the race to bottom, and trying to get people competent quickly, the world move to striker guns instead of the most training intensive DA guns. The question I have is if we assume that funds and time existed for the increase training time you would need for the average person to be competent with a DA gun, how much more competent would they be with a striker gun given the same time spent training? At the end of the day I think it is cyclical. Things come in and out of vogue, and then they swap again.
-
NRA Endorses Donald Trump For POTUS
Well who the hell else were they going to endorse?
-
Rain barrels
You think that was accidental? You think that air you are breathing? Hmm.
-
Rain barrels
On the other hand it rains on my garden fairly regularly, birds and bugs poop in it, etc, etc. One can take the fear of chemicals in the collected rain waters too far. Yes, your roof can collect more bacteria and bird poop then the birds will poop directly in your garden, so don't spray it on the growing vegetables, let it soak into the ground, the plants act as bacteria filters. Yes your roof can have some contaminants from the roofing materials, so look at water barrel systems that allow material to settle and do not draw from the very top or very bottom and occasionally flush your system. It is not as if most of the food we eat was watered with fresh glacier melt or something, quite the opposite, and then it is sprayed with oceans of pesticides and herbicides and preservatives before they show up "fresh" in ShopRite. I'm betting your roof water might actually be better for your plants then what you buy at the store. The other thing is that natural rain water is rich in all sorts of nutrients your plants crave, where you hose water from the municipal plant might not be. Ever notice how you can water the crap out of your plants but they do better after a little rain? Well water might help more, but not all of us have that.
-
Soft shooting 20 gauge.
I think Parker is correct, stick with a 12ga and go to low dram loads. With an 1100 or 11-87 you can drill out the gas ports until it runs on mouse sneezes. You can have a spare barrel drilled out for light loads and another left stock for standard loads.
-
Rain barrels
Rutgers has a traveling workshop on the subject, in which they teach you how to make them and use them and then you get to take one home: http://www.water.rutgers.edu/Stormwater_Management/rainbarrels.html Dunno where their next stop/workshop is but the page has lots of information on the subject
-
Hole size for press fit 9mm brass?
be aware the 9mm is a tapered case, it doesn't look it but it is, .380 at case mouth to .390 or so at the web. The rim itself is wider still.
-
George Zimmerman's gun up on gun broker
I call bullshit. I think trying to publicly sell that gun the way he did, calling the media, wanting to attract attention and bidders is in extremely poor taste. I defend Zimmerman's right to defend himself, but that man is nothing but a douche. Look at how he has conducted himself since, and now this. He has a right to sell that gun for however much he wants, but gunbroker has a right to also view him as a douche and not hold his bag for him. If someone refused to bake a cake for a gay vegetarian nazi couple, you would rightfully defend their right to choose who they conduct business with. Gunbroker just exercised exactly the same right, as described in their terms of service which Mr Zimmerman signed.
-
Any Subaru owners?
It is odd because Subaru admitted they had a problem and had been paying for engine replacements, so why the heck would the dealership not want to do the warranty work?
-
Need to remove rail problem
The other possibility is that it is rusted in which a sufficient application of a penetrating oil could also help
-
Any Subaru owners?
They know. They've been talking about a new "full size", hopefully one not as horrid looking as the Tribeca. Targeted for 2018
-
Any Subaru owners?
A note about being rougher before it warms up, that is actually on purpose. To get their PZEV ratings (which in NJ also get you a very long warranty on emissions components 15/150,000 I think) they run the engine harder and richer at warm up to induce some heat in the catalytic converter so it operates at peak performance. Yes, head gasket may go at some point, a lot of past subaru engines did, not sure the current generation has been around long enough to tell. On the other hand for every "possibly" head gasket change you are skipping 2 timing belt changes, but a lot more cars have chains now so not so uncommon anymore.
-
Any Subaru owners?
I bought a Forester last year and drove most of their cars at the time. I liked the practicality of the Outback, but I felt that with the 2.5 engine it was a bit underpowered. The same engine in the lighter forester is still slightly underpowered but ok, in the Outlook it felt a bit underwhelming. Stepping up to the 3.6 is both more money upfront and more money later. For me, the Outback I would have bought would have been like 7k more then the Forester I found satisfactory. Some of the 2.5 engines were eating a LOT of oil and had engines replaced, my understanding is that it is no longer an issue. The current engine bays are really very nice, easy to get to everything except spark plugs. On the down side, the current factory tires on most Subaru's are a sad choice made with efficiency in mind. Also the paint is thin and easy to scratch and a lot of body panels are also very thin. In one year I've gained like 3-4 door dings from people who can't park, but I work on a collage campus so there is that factor as well.