Everything posted by Vlad G
-
Anyone running a bushing compensator on a 1911?
There are differences between bushing compensator and real compensator which are actually part of the barrel (for lack of a better description). The bushing compensators are nowhere near as efficient from what I gathered.
-
Facebook discussion: "one pin turns it into full auto"
The BCG may or may not need to be replaced. The FA BCG is not consider a FA part and lots of people use them in standard ARs, legally as per the ATF.
-
NJ task force on violence public hearings
I'm planning to make the Brookdale one myself.
-
The Future is Upon Us / We're Screwed
It will probably fail the Heller test of not banning thing in common use.
-
Has anyone read the book, Unintended Consequences by John Ross?
It is an odd book. He is not what I would call a good writer but his story is good enough to keep you involved, even when he gets a bit nutty.
-
GOVERNOR CHRIS CHRISTIE ELECTRONIC RESPONSE
I have no doubt Christie is VERY aware of the polls for Cuomo and the hit he took. He already threw some jabs at him weeks ago, this is only likely to play on his mind. National elected official also are probably quite aware of it as well. ie: this is good, that poll from NY is very meaningful.
-
357 Sig
BTW, here is a fairly popular image comparing the performance of various cartridges given modern bullet design. Basically what that images shows is that science is getting pretty close to squeezing everything can be squeezed from an handgun in terms of performance by engineering bullets specifically for each cartridge and the overall performance is getting to be quite similar. From there on, it is all about shot placement, so pick a caliber you can afford to practice with. I used to think more power was better, but I've been swinging back to more practice is better. Of course, some revolver cartridges will do better, we are not talking about .44mag here, we are talking about things that can be shot from a reasonably sized semi-auto, not grizzly hunting weapons or silly Desert Eagles. To your barrel change question, most .357sig handguns are built on the exact same frame and barrel specs as the .40s&w handguns, so just switching a barrel is often a really easy to convert them. You can purchase after market barrels that do just that.
-
357 Sig
Some are more then others. You can get decent ones around the $900 range (current madness aside). They are more expensive because as an older design they are harder to manufacture then the $80 Glock (rumored to be it's actual production cost) and because there is a certain degree of snobbery/fanboy behavior surrounding them. That said, 1911's have some brilliant design features and ergonomics which is why there are so many people who buy them, when most firearms designed at the same time are now curio's.
-
357 Sig
Sorry, no. The .357 sig has the same performance as the .357mag in a VERY narrow band of options, most of the .357mag loads outperform the .357sig. In exchange you are getting a cartridge that is unpleasant to shoot, loud, expensive, all of which results to less time practicing. Statistically, given modern ammunition, there is a insignificant difference between different handgun cartridges, as advances in bullet designed have flattened the differences. I think most people will be much better served by practice and training and focusing on shot placement. The cost of .357sig being what it is, most people will be much better served by choosing something else.
-
Credit Card surcharge coming to NJ?
You are the exception, and well done. The average credit card balance is over $7000 which is telling because a lot of people don't even have credit cards (mostly but not qualifying) and the average for people credit card debt is over $15000.
-
Credit Card surcharge coming to NJ?
Thats not technically true, home/auto/school loans work just fine.
-
POI differences between jacketed and polymer coated bullets?
The design of the bullet will matter. The profile of the nose, the profile of the gas and how gases affect it as it leaves the barrel, all these things matter. No two bullets designs will fly the exact same except by blind luck.
-
Credit Card surcharge coming to NJ?
They already are a bank and they already do that : http://www.walmart.com/cp/Check-Cashing/632047
-
Does ANYONE make a low profile gas block that uses pins??
That would be a roll/coil pin not a classical tapper pin.
-
POI differences between jacketed and polymer coated bullets?
All bullets will shoot slightly differently. Even two different manufacturers jacketed bullets at the same weight will shoot slightly differently. You can adjust your sights or adjust your load or adjust your point of aim.
-
Credit Card surcharge coming to NJ?
You lost me there, sorry. The CC companies are banks, and they charge pretty serious interest rates. They don't need the fees, they want the fees. Those are very different things. The fees went up in recent years because of the credit card legislation passed a couple of years ago making it harder for them to be predatory about their behavior. Faced with LESS profits, they decided to jack up fees all over the place to make up the difference. The answer is the same it has always been. If you can, don't use a credit card.
- NJ Bill S2430 – WE NEED ACTION NOW TILL THE VOTE!!!
-
Does ANYONE make a low profile gas block that uses pins??
I've never seen one, but I've also never seen a properly installed screw type gas block move.
-
does your other thumb touch the slide?
Your thumb touching the slide is not that big of a deal. Avoid it if you can but I know some excellent shooters that have finish wear on their slides from their thumbs.
-
Biden opines on Shotgun vs. Rifle accuracy
Well then, problem solved. If the scariest and most efficient weapon is a shotgun, and it is trivial to use as per the VP, the clearly we should be banning skeet guns not the hard to use and less efficient assault weapons. Quick, someone run and tell Feinstein.
-
"You're not ready for SHTF if you don't reload" MYTH!
Guys, you live in NJ. Bugging out is mostly a non-starter. For all practical purposes you live on a island with 8 million other people with relatively few ways of leaving. You can try to cross the few bridges into PA (with 8 mil other people) or you can head north and run into the 8million residents of New York City moving across your path. Whatever disillusion you might have about bugging out and heading for the hills to starve with your 8 million closest buddies when the mythical manure hits the rotary air circulation device, you need to re-consider your options. If your plan A is to leave behind a solid structure and most of your assets and trade it for the cold hills of PA (where, lets not forget, there are already armed people who may not take kindly to it) you really need a plan B. You might consider actually moving out of state if this is something you really worry about. Back to reloading, the main reason one reloads is to shoot more for the same money. You never save money, you just get to use the money better. If the world goes to the crapper where you need to reload as your only source of ammo, you will fail to do that. Most powders come from Australia, do you think they'll still be available? Primers are very hard to make as an individual. Bullets you can cast, but try shooting cast bullets in a fast cartridge like .223. If you think the world will fall back that badly, then consider a flintlock and learning how to cast your own balls and make your own black powder.
-
Best lube for 1911?
If your gun is so tight that it only works with certain oils, your gun is way to tight and asking for problems. I've seen a number of hand fit competition guns and I can't think of a single one that needed a particular oil. If the surface tension of lubricants changes how your handgun works, you have a problem seeing how the lubricants will behave differently at different temps. I'm no expert, but militec's claims are rather inflated. For one it doesn't bond to metal, or it would be glue. I fail to see how you would want your lube to bond to your gun. Having used Militech, it is in my opinion a waste of time and money and it isn't particular better the many other ones out there. Keep in mind, we get some new miracle gun oil every year that claims to be better then the miracle gun oil from last year. Don't fall for the hype. Heck, chemists will tell you that having a chlorinated esters (which militec uses) next to high temperature and high pressure metals is asking for stress fractures.
-
Best lube for 1911?
Whale blubber .. I think everyone is over thinking this. Just lube the thing. There is no perfect lube, there is no 1911 specific lube. Most lubes work just fine, just match their viscosity to the environmental conditions. I wouldn't use grease in low temperatures as it gets harder and more sluggish. I wouldn't use a very light oil in summer as it leaves the gun quicker. I wouldn't use any kind of lube in very dusty conditions, I rather shoot the gun dry then get it full of crud, I've learned this in the old CJRPC pits which used to be dust bowls during USPSA matches.
-
Dealing with Anti gunners on facebook that deny facts
I'll tell you what I do, and the venue doesn't matter (facebook, forums, comments, etc). First take the higher ground. Don't curse, don't call the opposition names, do not roll with the pigs in the mud. Calmly make your points, ALWAYS providing links to "respectable" sources to back up your points. Do not link pro-gun websites, find the sources for the data on pro-gun websites and link those. It helps if you included Gallup polls, AP reports, FBI data, etc. Avoid linking to Foxnews or "righty" websites so they can't deflect the conversation to "your news source lies". Feel free to lay down logic bombs in which you get the other side to contradict themselves. This takes a bit of effort but it is worth it. One of the best possible results is the other side starts cursing and foaming at the mouth, if that happens sit back and have a congratulatory beer. All of the above work because you will almost never change the mind of an anti. You are not arguing for the anti's benefit, you are putting on a show for everyone else watching. Your goal should never be to change the anti's mind but to educate everyone else that might be reading a public forum. Whenever you post ANYTHING think of the unconvinced watchers on the fence. They are your true audience.
-
My day so far... I can see how people lose it!
The scary part is that these people beat others for the jobs. Imagine those who didn't get the job. And then remember that they vote.