Everything posted by Vlad G
- USPSA holster limitations
- USPSA holster limitations
- USPSA holster limitations
-
Inherited Mauser Mod. 98 and Winchester Model 94 (Pics inside)
You can clean them with gun oil, some rags, and some elbow grease. I would strip the down and check for rust under the stocks and everywhere else. If the rust is being stubborn, you can use a some oiled 000 steel wool, is not like you can hurt the finish much more As mentioned, the Mauser was sportarized and I would check to make sure it is actually in the original caliber and hasn't been re-chambered, the barrel looks like a cutdown original but I can't be sure. Even if it is in the original caliber it might be a good idea to have it headspace checked, the gauge is like $30 or you can have someone else do it.
- USPSA holster limitations
-
USPSA holster limitations
Basically that is the only difference. Keep in mind that in ALL divisions 5.2.7.2 applies which says that the heel of the butt of the gun can not be bellow the top of the belt. In practical terms this translates in Production and Single Stack, you need to have your holster behind the front of the hip bone, it needs to cover most of the gun including no lower the 1/2" bellow the ejection port, and they can not place the gun more then 2" away from the belt. The difference boils down to this: In production you can use a dropped and offset holster insert and in Single Stack you can't
-
Maker of AK-47 goes bankrupt
At the point when people take that as bashing I'll stop reading this forum for its distinct lack of a sense of humor.
-
Maker of AK-47 goes bankrupt
How can that be .. isn't he AK the best rifle in the world? I am shocked. SHOCKED!. To be fair once you flood the world with your guns for "free" you will have a hard time selling because of oversupply and because people will balk at the real price.
-
Built the TAC SLING featured on AR15.com.
Yep, all slings are a compromise. Its not that the Irene or whatever is a BAD design, its just that all lot of their supposed flexibility is lost as soon you put on something other then a tshirt. At that point it is basically a single point sling with an extra attachment up front for retention, and that is not a bad thing, but honestly there are a lot of them that do that, all sub optimal. I'm not looking for the ideal sling, personally I've reached the conclusion they all suck, by necessity.
-
Built the TAC SLING featured on AR15.com.
Then explain to me how you move the rifle behind you while wearing a pack please. Do you wear your sling OVER the pack so now you can't remove the pack without removing your rifle first?
-
Built the TAC SLING featured on AR15.com.
Nice job Anthony, nice little project. As for the Irene sling, for my money, it is just iteration number 43538 of a video of someone hawking their uber sling that relies on tension on the body for it work right (note how that main loop is rather tight on him) and for which they show all the manipulations while wearing a t-shirt an not even a spare mag carrier on their belt. Operating that sling while wearing mag pouches, a camelbak, any kind of load bearing vest, or a backpack would make it nothing more then a carry strap LESS useful then any 2 point sling.
- If you can legally own this, will you buy it?
-
USPSA Central Jersey Rifle & Pistol Club - 4/8/12
I've learned to not expect things about what other people do, they always surprise me. I am however guessing that we will have a lower turnout then usual.
-
USPSA Central Jersey Rifle & Pistol Club - 4/8/12
We start as 10, be there by 9:30, if you never shot USPSA before be there by 9.
-
If you can legally own this, will you buy it?
200k is an estimate because one of the problem is that the ATF is rather terrible at record keeping. On the other hand, 200k is quite a lot. If you shelled out $20k on a gun that can shoot full auto odds are you did it because you like to shoot full auto so you are going to shoot and shoot a lot, and likely take movies of it, It's not the "I have my hunting rifle and a old .38 in the sock drawer" crowd that owns them.
-
Saw a high speed chase New Brunwick today
Seeing how that is my daily commute at that time of day, I sure am glad I left work an hour early.
-
Guns getting scarce?!
Most companies produce stuff in batches. This week they make lowers, next week they make uppers, or maybe more accurately this week they'll make the 16" barrels and next week the 20" barrels. As demand is increasing the batches get larger, and thus further apart so the supply is more noticeably staggered. The other thing to consider is that most manufacturers are going be reluctant to invest a lot of money in new production capacity, because what happens after elections? If Obama wins and decides to start doing executive order bans, they can't sell stuff. If the opposition wins and people are not panicking anymore, again they can't sell stuff. Looking at the NICS curve over the last 12 years I don't see how we can avoid a crash in gun sales never mind sustain this rate of growth. At some point people are gonna look at their safes and say .. there is no more room in here .. time to stop buying more and maybe time to sell them thus flooding the used gun market and reducing sales further. Yes, we have grown the ranks of gun owners but we haven't doubled the number of gun owners while we have doubled the number of guns we bought.
-
House visit to sign permits?
I don't know if they still do this because I didn't get a permit in a while, but my town at least used to hand deliver the sign certificates, although in practice most of the time I just found a envelope in my mailbox (with no stamp or postmark). I'm suspected with the increase number of purchases they might not have time for that anymore.
-
New Pit at Old Bridge Rifle Pistol Club?
The trailers (including some new ones being purchased) are being reorganized in "the CJ way" so we can have on small rolling trailer per pit for matches, or at least that is the current plan.
- If you can legally own this, will you buy it?
-
Grain Count?
Yes, no, maybe. There are too many variables. If you had a lighter bullet and a heavier bullet and you wanted to drive them both at the same speed with the same powder you would need to use more powder. On the other hand normally speaking heavier bullets are actually launched moving slower then lighter bullets so they might not need extra powder to make that slower velocity. On the THIRD hand heavier bullets are longer, take up more of the case space which means there is less room for powder and more importantly less room for the powder to burn in hence resulting into unsafe pressures so may be that heavier bullet has less powder behind it then the lighter one. And then there is the forth hand of course, which says you might not even use the same powder behind the two bullets. Some powders are more suited for lighter bullets some are more suited for heavy bullets, and x grains of one powder have nothing to do y grains of a different powder, there I are all very different. This is why people who reload often have a couple of heavy books linking all the safe combinations, and then crosscheck that with the data from the component manufacturers websites.
-
New Pit at Old Bridge Rifle Pistol Club?
Don't expect 8 stages anyway because we need more props, stage designers, and daylight. When you have 100 shooters, and you assume about 1.2 minutes per shooter per stage you are adding another 2 hours to that match with one more stage. Outside matches setup the day before and RO'ed by dedicated staff 7 stages are about the limit, at least if you are talking about our mix of field course length. You can have 20 I suppose if they are quick stand and shoots, but if you want real stages ... 7 is pretty much were it is at.
-
The Beretta ARX-160: A possible game changer in the AR15 market
BTW I suspect the SCAR is american as apple pie, seeing how FN is probably more american then belgian nowdays, their huge US manufacturing footprint and development.
-
If you can legally own this, will you buy it?
FA weapons are on a closed registry since 1986. That means that no new ones can be sold to civilians, only ones already registered (something like 200k or so of them). Some states like NJ don't allow them at all, in the states that do you have to go through huge paperwork with the ATF for each one. When you see Sons of Guns do their thing you will note that a lot of their work is for police/military/contractors that can bypass that law or working on existing weapons.
-
USPSA focused shop?
Powder storage for a vendor is complicated with various legal and fire code implications often requiring powder magazines and so on depending on the quantities stocked. Given that to make sense of stocking those items you would have to stock some quantity and variety most shops choose to stay out of it. I find that some shops stock bullets and primers but not powder.