Everything posted by Vlad G
-
Magpul UBR...does this need to be pinned?
That brings up the issue of what is law really, because the "Law" says nothing of the sort, the N.J.S. does but that's technically not law because it wasn't passed by an elected body, etc, etc, but yeah as far as we are concerned they are the same I suppose.
-
Zombie preparedness
Actually I think the CDC and DHS are doing good work promoting preparedness, and it is one of their efforts that I applaud. Sadly for the most part the only people paying attentions are those who would do it anyway.
-
Zombie preparedness
Ok guys your fears have been validated, even the CDC is talking about zombies: http://blogs.cdc.gov/publichealthmatters/2011/05/preparedness-101-zombie-apocalypse/
-
USPSA Old Bridge 5/22/11
Yes I borrowed it but I didn't use it I had just enough of my own to finish with those 4 rounds left. Your ammo was in the next mag on my belt. Thanx, btw.
-
Opinions wanted on a few .45's
Ok so here is why I disagree with with 3dot sights, I guess I should have explained earlier. 1) Most 3 dot sights I've seen have alignment issues. This can present itself either because when the dots are aligned the top of the front sight is not aligned with the top of the rear sight, or because the dots are not drilled perfectly centered (specially the front one), or because the paint in the dots is chipped/dirty/unevenly applied. Not all 3 dot sights have this problem but most of the ones I've seen had some form of one these problems. Yes, they could be made right, and I'm sure some are. 2) There are various theories for what makes a good ratio of front sight width to rear sight width. I subscribe the theory that says the rear sight notch should be twice the perceived width of the front sight when the sights are aligned. Basically I like to have half a front sight width worth of light on either side of the front sight. For me and others this allows for precise sight alignment. This however leads to needing either a very wide rear notch which leads to more slop or a fairly narrow front sight. A narrow front sight tends to not have lots of room for a painted dot. A fiber front sight can work well in a thin format because the fiber can very thin and immediately visible. 3) Painted dots work ok-ish in good light, but if you get used to looking for them you end up spending a lot of time searching for them and trying to align them in poor light. This can be solved by tritium vials (and fluorescent paint sucks as it quickly stops glowing or gets covered with crud) but they tend to be fairly thick requiring beefy front sights, and I think skinny is better. 4) Dots get dirty. Once they get dirty finding them and aligning them gets harder. 5) In bright light the front painted dot can produce a wash-out effect for the front sight making it a bit harder to see it accurately. 6) Aligning top of front sight and rear sight is more natural brain exercise, all you have to do is make a flat plane and see equal amounts of light on either side of the front sight (which is also why like the front to rear width ratio mentioned above). Making a straight line out of 3 circles is not the most natural thing and then trying to make sure the circles are equally spaced is a harder brain problem. Sure, is doable, it is harder. 7) 3 dot sights raise questions of where you zero your gun. If you zero to hit under the front dot, then your front sight partially obscures what your aiming at. If you zero to hit on the top of the front sight now you either have to aim low or align the dots and then look at the front sight top. For me 3 dot sights offer not noticeable benefit and have to many draw backs, I replace them as soon as I possible. In order of preference, my favorite is a flat (and preferably serrated) rear with a thin fiber optic front sight, next is a flat rear with a skinny black front sight, next the 2 dot sight (like the factory Sig sight for example), followed by everything else. I'm not going to say 3 dot is the LEAST preferred one because I'm sure someone can come up with some steam powered rubic cube type sighting system that requires me to solve differential equations to align them, but it is pretty much to the bottom of my list.
-
USPSA Old Bridge 5/22/11
I almost never bring more the 200, and I always go home with some. The MINIMUM required ranges between 140-180 for the average match so you want to have same spare if you plan to make up shots or maybe reshoot a stage. If you are new to the game bring 250-300, you'll take a lot back home. My policy of 200 has nearly bitten me the butt a couple of times but I've never not had enough to finish a match. Once I went home with 4 rounds left, that was a tad close.
-
Recoil Springs on a 1911
I found that the 16lb or 15lb progressive springs from Wolff will make pretty much any load work fine. The progressive springs behave a bit differently then normal ones. Also, load hotter.
-
Opinions wanted on a few .45's
TBH at 7-15yards a guttersnipe type sight works too. Its not that 3dot sights are some how broken and dont work, it's that they don't allow you to get the most out of the gun.
-
Opinions wanted on a few .45's
Yes you can
-
Open Carry Phily Incident Charges Filed
Hey man, I understand that, but guess what .. So do we. We'd like to get home too. The problem we are facing is that at some point the safety of police officers has become more important then the safety of those their are supposed to protect. Do you see the problem here? Its not that we don't appreciate what you do, and yes your job is more dangerous then most, but it is far from the most dangerous. Construction workers, farmers, fishermen, loggers, sanitation workers, coal miners they all have a higher work related fatality and injury rate then policy officers. Their jobs are as necessary as yours, because while I firmly convinced that we do need law enforcement, I'm also pretty sure we need food, shelter, and energy. However you almost never see the people on those jobs advocating the removal of rights from everyone else for their safety. On the average day I don't need to carry a gun. I get up, walk the dog in a good neighborhood, drive to work on a collage campus, drive back, stop for some food shopping in a good area, go home, walk the dog again. Of course, there were 5 shootings on my collage campus just a few weeks ago. The problem is that not all days are average. Even more importantly to me, my wife DOES need carry a gun and she can't. She does charity animal rescue work often in the worst **** holes on earth. It comes with the territory, good people take care of their pets, people living in **** holes often don't. She goes on and does work that the state doesn't with money she raises herself without anyone getting taxed for it and she does it in places where the police officers in the area told her "We don't hang out here long, its not safe". She is 5ft tall and often alone there, and doesn't even have a badge of some sort to instil any kind of government authority. If anyone ever needed to carry a gun is her, but in New Jersey that's not reason enough. I guess the state's position is that it is better for her to be unarmed, for the safety of the armed drug dealers or maybe for the safety of the officers that don't actually want to go into those places. On the days I can join her to giver her a hand, I carry a powerful flashlight. Awesome defense that. By the time a police officer gets there, at least they'll be able to find out bodies by the bright lights on the ground assuming they weren't stolen.
-
Opinions wanted on a few .45's
Please please don't get 3 dot sights, sooner or later you'll regret it. Eventually everyone comes around to black on black, or fiber front on black rear. The dots are a crutch at first and shackles later.
-
Open Carry Phily Incident Charges Filed
FearThisInc, it is a sad day when your perspective differs so wildly from the every day civilians you are sworn to protect. Reading your comments alone makes me grind my teeth and I like and support cops. The attitude that "orders must be obeyed" is exactly what leads the ever growing rift between police and everyone else. The fact that every discussion about interactions between police and the rest of the population comes down to "us vs them" reminds of growing up in a communist country. When the police lose the support of every day people on the street, it is time for the police to re-evaluate how they conduct themselves or things will only get worse and worse with officers assuming everyone is a threat and being increasingly combative and the people on the street being increasingly suspicious of officers and even less likely to be any kind of helpful. Is that a community you want to police? Would you want to live in a community policed that way if you weren't in law enforcement? I've been there, I know where this ends, and it isn't pretty. I don't want to be there again. Take this as a plea for looking at this kind of situation from the perspective of average Joe. I understand that in your line of work you have to be ready to deal with a criminal that may seem like a normal person, but when you jump to mindset that everyone is a potential criminal we ALL lose.
-
IDPA @ Somerset, Sunday 5/15/11
Sort of. I'm a match director and I will NOT get in debates about how other match directors run their matches, I respect the effort they put in because I know what it takes. I found the scoring surprising, but just because I don't understand the reasoning behind it it doesn't mean I'm to going argue about it or criticize it. When someone puts on a match, I play by their rules. That was the gist of comment, and in retrospect I probably should have not made it at all.
-
Spent case stuck in chamber.
That probably means it has a 5.56 chamber. And then there is the wacky .223 Wylde which unless you want a specific combination of wacky accuracy you should stay away from, its basically a hybrid chamber.
-
IDPA @ Somerset, Sunday 5/15/11
I honestly don't know what the current rule on that is. Members pay $5 but I know at some point they had some issues with a different discipline and it ended up being $20 for non-members. I don't know if that rule is still in effect however.
-
IDPA @ Somerset, Sunday 5/15/11
yes you can just show up, but would be more expensive.
-
Opinions wanted on a few .45's
I guess we'll have to agree to disagree. In my experience the reverse is true. Also see Hilton Yam's take on 1911 mags.
-
Spent case stuck in chamber.
Thats a good rule of thumb. 5.56 has slightly looser specs on the cartridge size, and higher pressure. .223 in 5.56 is fine, the other way around you are asking for trouble. Read this: http://www.thegunzone.com/556v223.html
-
IDPA @ Somerset, Sunday 5/15/11
I don't think either of us ever said we were. I far prefer USPSA and with the number of matches in the area I don't see myself shooting anything else with any kind of regularity, but if our area didn't have USPSA match in abundance I'd probably shoot IDPA. However, I'll stick to USPSA I think. I won't comment on the odd "house rules" scoring.
-
IDPA @ Somerset, Sunday 5/15/11
We probably won't get scored as per IDPA policy that if you DNF a stage, you DNF the match. That's one drawback of time+ scoring, by only shooting 3 stages we would have had a lower score then anyone else, and lower scores win :-)
-
How are you preparing for May 21st?
All it really says is that the Maya stopped trying to write down a calendar past that date. Perhaps because their up to their a** in Spaniards, or because they discovered coca leaves.
-
Opinions wanted on a few .45's
Buy CMC Power mags. If your gun doesn't work with them, odds are your gun as a problem.
-
IDPA @ Somerset, Sunday 5/15/11
Nice to see you guys, Slav had to run to deal with life stuff and being I was his ride so we had to book after the 3ed stage.
-
Opinions wanted on a few .45's
You are right in that is different, its a Swartze safety not a series 80, my bad there. I'm not sure if its better though, but I don't want either.
-
Opinions wanted on a few .45's
Between those two I would recommend the Springfield for two main reasons. First, in my experience the Springfields are more reliable, I've seen a number of Kimbers have problems. This is not to say that all Kimbers have problems, just whenever I see a factory 1911 break, its likely a Kimber. This perception might be skewed because Kimber might sell more guns. The second reason I suggest Springfield is because they are a series 70s gun instead of the Kimber series 80s. The big difference is that series 80's have extra parts to make a firing pin drop safety. These are extra parts which are small and fiddly. Springfield uses a titanium firing pin with an extra power firing pin spring to solve the same problem and passes the California drop tests just like Kimber does. The advantage is easier parts interchangeability and whenever there are fewer parts, there are fewer parts to break. Just the other day I handled a stainless Springfield TRP operator and I was really impressed how well it was fitted, I've seen custom guns with worse fit and finish.