Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Vlad G

Members
  • Joined

  • Last visited

Everything posted by Vlad G

  1. Who still recommends that? I want to avoid buying from them. They are either not selling you a finished barrel or would like to sell you another one sooner. Clean it your new barrel to remove the packaging and shipping gunk, and shoot it. For those who never seen McMillan's opinion on the subject, I think he has always made a very clear point about it: http://www.snipercountry.com/Articles/Barrel_BreakIn.asp
  2. Generally speaking it is a good idea to be there by 9, specially if you have never shot multigun matches before as some form of new shooter introduction may be required. Be there earlier if you want to help, we always need volunteers to help in the morning.
  3. Oh I agree, blocks are better then keys, but with our laws and perma-attached muzzle devices, gas blocks are more of a pain to remove and install, given a lack of two piece adjustable gas blocks.
  4. Sunday morning like always, we can't take up the range on Saturday
  5. Your liquefied butter doesn't operate at 52k psi inside your arteries. Gas ports wear out bigger and don't clog.
  6. Your inner engineer should should keep track of what Bernuolli has taught us about gas flow restrictions and speeds of gases. I wouldn't screw with the gas tube because you should probably try to not mess with different pressures at different ends of it. It might work, or it may do strange things. The Adjustable gas blocks don't add more moving parts, they just add more parts that MIGHT move if they are not incorrectly set. Broadly speaking, I agree with you and I don't have an adjustable gas block on any of my rifles, but I do chose barrels with smaller gas holes to make up for it. The other problem is that there aren't any two piece adjustable gas blocks for normal sized barrels (JP makes one for their fat barrels) so in NJ screwing around with the gas blocks is a bitch if you can't remove them easily. Your other option could be an adjustable gas key. These are a newer thing, and while I'd prefer reducing the gas at the barrel, reducing it in the key might be the next best thing. I think of my buddies is using one now and I haven't heard him bitch about it. RCA and SunDevil make such things and they are fairly cheap to try out.
  7. Most ARs are over gassed, hell the entire thing is designed to be overgassed by a lot. You can "fix" the ejection pattern with heavier buffers, but that doesn't actually do anything about reducing the wear on the parts that handle the gas and adds more mass that moves back and forth. Personally I don't view that a solution that is worth doing, all you are fixing is where the brass piles up. I think being overgassed is probably not good but it is better then undergassed so if you are going to error in one direction that is the one to use. I would suggest a few alternatives: 1) shoot something other then high pressure m855. An AR that tries to run on vanilla .223 is probably always going to be a bit overgassed with 5.56 2) get an adjustable gas block 3) get a different barrel with a longer gas system and perhaps a smaller gas hole.
  8. Color is a personal choice, but I think fiber front and black rear is pretty much the perfect daytime setup, and have a white light at night.
  9. The other unlikely option is that the hole it lives in has been drilled oversize or the pin itself is undersized.
  10. Don't worry about the face of the buffer, they'll work even beat to hell and back. I am puzzled how that happened. The only way for that to happen is for the extension to back off enough so the pin can come out and get ping-ponged by the returning carrier.
  11. Tfo's are the direct answer to your question, but I think the real answer is red fiber front, black rear, and a weapon mounted light for low light.
  12. The problem with the Cougar is that it is only like $50-$80 cheaper then the PX4 that replaced it.
  13. I'm sure CZ/Dan Wesson still make a 1911 type. The most fun to shot 10mm I've handled was a Dan Wesson Commander sized and bobtailed. Nice fun package.
  14. I'm with the Cougar people, the softest .45 I've ever shot. I dunno if that translates to the PX4 with the same action but lighter frame, but the rotating barrel action seems to do really well with the big pushy rounds making for a very fun shooting .45. Beyond that I'd say a well sorted 1911 or Sig220.
  15. Yes, I want to say more then half of the DQ's I've seen in major 3gun matches have been dropped handguns while running hard or doing other stuff. I'm not even talking about acrobatics here, just holsters without enough retention. More and more people in 3gun have been switching to ALS or GLS holsters, and my draw from a ALS is not actually any slower then from a competition style Bladetech so I use it for everything now. Also Serpa's suck and using new people to study this fact is relevant as "new people" are the ones that buy them, everyone else should know better. On the bright side I see fewer and fewer serpa's nowdays, I think people are catching on.
  16. So like everything else people are going to exaggerate sometimes, but don't discount that there are lots of people out there who like to shoot groups. I don't hangout with bullseye shooters but there are lots of them about and they can shoot crazy groups.
  17. Slowfire off hand at 25 yards, if I have my shit together, my groups are between 3 to 4 inches. I know this because I occasionally test my gun accuracy with various loads. I'd call that fist sized. Go see a what a bullseye shooter can shoot, they'd put Alec and certainly me to shame. Or Bianchi people, they are machines. I don't think shooting fist size groups at 25 yards is some inhuman feat, I'm a pretty terrible shooter most days so if I can do it then it can't be that hard, but keep in kind that the gun itself needs to be able to do that as well. If my group is 4", there is a good chance the gun in a mechanical rest will do a lot better. If the gun can only do 4" in a rest, then my group will probably be 8".
  18. Actually I'd even say 3 for rifle, as some of the starts are going to be empty rifle starts and don't assume you will hit every shot you fire. If this is your first match, pockets work, but you want something on your belt ideally. Don't go spending tons of money. A couple of cheap Uncle Mike's double mag pouches for the pistol mags will be fine, so will be any made by bladetech, etc. For rifle mag pouches, look at at Bladetech, Safariland, and Ready Tac, those are my favorites. But again, if this is a first match pockets work, 1960's 3-mag pouches people buy at gun shows for $5 will work, if you have a chest rig you can use that, don't over think it because the auxiliary equipment is unlikely to make or break your match.
  19. Let you wife buy whatever guns she wants, your life will be better. Also, this day an age there are no bad guns, so while I think the 92 is relic of the 1930's(see Beretta 1934) with it external moving parts like a steam train, there is nothing wrong with it. The PX4 does come in a "tactical" extended barrel format, that's kinda cool and I've liked their rotating barrel since the first time I shot a Cougar in 45 and felt softer then a 9mm.
  20. Yes, to a point. In my experience it isn't so much that you expand the nut around the bolt, but that you get them to move against each other breaking whatever bond they might have. The other is the difference in specific heat of metals. If I remember correctly aluminum will expand about 50% more then steel for each degree absorbed, but it takes twice as much energy to get aluminum to gain a degree as it takes for steel, which means that all things being equal the steel part will expand faster, specially if the heat is applied to the steel part. But this stuff is dragged from deep in the back of my hand and I may have my numbers wrong. Of course applying heat just to the nut is best.
  21. Get a new FFL. The notion that you are not the only customer in the world and so on I also flawed and unacceptable. Either gun shops are something special and different then the rest of commerce in which case you work at having a special relationship with your customers and you go the extra mile, or they are nothing special and no different then Walgreens and personally I never heard HomeDepot holding my special order vanity for an extra day because its hard to do paperwork. Personally I put gun stores in the car dealership category, if for different reasons. I am forced by law to do business with them if I want to purchase a product. I can't buy a new car from anyone but a cabal of lobbying car dealerships and I can't buy a new gun from anyone buy a gun dealer because so said slime balls in office. There are good car dealers and terrible ones, and the same can be said for gun dealer, but I have yet to enter a car dealers ship that wouldn't bend over backwards to have me walk out with a car they had on the lot, or even on the track driving in later today.
  22. The reason heat tends to work on ARs is because of bimetal construction. The two big things can be torqued, glues, stuck, or loosened are the barrel nut and the castle nut and they are both steel on aluminum, so they heat up an expand at different rates. This doesn't work so good on steel on steel bolts, but for me it has always worked for those two nuts. Yes, some barrel nuts are aluminum, there you hope the big mass of the barrel nut takes the hit first and expands before the receiver.
  23. Apply heat first, before force. A lot of loctite products soften up with heat which will mean you don't need to risk other damage by applying force first.
  24. There is something very bizarre about the rules. Leaving aside that it sounds as boring a bullseye, and it is actually time plus scored bullseye, they have exclude anyone of who's ever placed in the top 10% of any major competition event, except USPSA there you are excluded if you were in top 15%. Mkay ... Don't they know USPSA people just spray and pray?
  25. Putting on events is getting harder as industry sponsorship is getting a bit thinner. You should see 3gun match prices this year.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.