Everything posted by Vlad G
-
Old Bridge January 2016
Yes, during matches the range is open, you can follow the driving directions and just drive in and say hi. Look for Jim or Dave, everyone should be able to point you in the correct direction. Bring eye and ear protection and use it if the match is underway.
-
New SPR build
DI. They are softer, easier to manage later on, you are not hanging a bunch off weight off the barrel to mess with your barrel harmonics, etc, etc/
-
Great Solution for IDPA Space Challenged Club
Blind stages are a royal pain in the ass and a terrible thing for a competitive event. They are fine tool for training, but every competitive event that has tried has ended up dumping the idea, for many reasons. It is not competitively equitable, slightly dangerous for new shooters, anyone who hears about how the stage is laid out form their buddy has an advantage, etc, etc.
-
Easier to load handgun
Put a lighter recoil spring in your gun, and maybe get one of the rear sights designed for emergency racking against objects, they come in handy.
-
New SPR build
In my case it was a Vltor upper. The barrel hole was vaguely oval, its inner diameter varied from 1.002 to 1.009. I was trying to fit a barrel machined at 0.999 and it was like tossing a hot dog down a hallway. This isn't to speak poorly of all billet uppers, I'm sure lots of them are fine, my point was that just being a billet upper is not a sign of quality by itself, how the metal was poured is not the determining factor, but the machining is. I went through 4 uppers that I swapped around or returned before I found one I really liked (1.001, all the way around as far as I could measure it) and that was a forged JP. YMMV.
-
Firearms At The Met?
Yep, that's what I thought of too
-
New SPR build
That's fine, I've had billet uppers that were out of spec, because at the end of the day they are still final machined by the same set of tools and that is were it can go all wrong. To my mind what really matters is how round is the barrel hole in the receiver and what is its inside diameter, a couple of thousands can make the difference between a tight fit the barrel and a sloppy mess. They are a fairly personal choice. That one looks ok but I've never shot it so I can't speak of it. On the other hand it seems to have been based on the arrangement of other successful ones so why not. I kinda like that it doesn't have an enclosed high pressure chamber which in NJ is a very good thing, as you can't take it apart to clean it when it fills with crap.
-
New SPR build
Nordic 18" stainless, 1/8 .223 Wilde $250 https://nordiccomp.com/categories/barrels/ (their barrels are made by Wilson Arms) JP's barrels are $479 but include a headspaced JP bolt. Rainier has like 4 barrel that sorta match those specs under $400 etc etc
-
New SPR build
So much this, doing anything but full size (maybe even with small base dies) is asking pain and suffering.
-
New SPR build
I dunno if that would be my determining factor For the fixed stocks, if you are going to mount optics I would recommend something with a bit of a cheek rest. I like the ARFX Ace stock just fine with red dots, but I don't like how it interfaces with my face for more precise shooting. I'm currently using a EFX-A1 stock but I would also look at a LUTH-AR type of stock as well.
-
New SPR build
Not sure why you chose a billet upper, in my experience they make no difference. You do want a well built upper, but plenty of forged ones work fine. Consider a Wylde chamber if you want better accuracy but want to still be able to shoot random 5.56 ammo I have no idea if the APF bolt group is worth buying, you might consider alternatives.
-
3 gun pistol!
Both approaches work, for different reasons. Most of the top end guys use 2011's because they are pretty much the top of the line handguns in almost every run-and-gun type of event. They are accurate, fast, high capacity (in states where that matters), ergonomic, etc, etc. Some top guys and a lot of other people besides, use striker fire guns because in 3gun you often need to abandon your gun quickly in designated receptacles. We abandon, rifles, shotguns, and pistol, but all of them have to be abandoned safely which means the gun needs to be completely empty or the primary safety must be engaged. Failing to do so has significant penalties, depending on the rule set, in the best of cases you pick up 20sec penalty which is severe and in most cases you will be completely disqualified from the match. A large number of DQ's at major matches comes exactly from this cause. With a 2011 design you need to have that thumb safety well engaged and you need to also make sure that it does come off when you abandon the gun from contact with the receptacle. With a striker fired gun, most of the time the primary safety is built into the trigger, no need to control an extra lever and no way for it come "off" when you dump the gun. That said, either will work, and so would any other hammer fired gun with the same type of limitations.
-
3 gun pistol!
Hey Ron, let me know how that RIA works out, I've been thinking about it too.
-
Hi-Point Firearms
Don't. Buy a used police trade in or pretty much anything else but that. You will regret it later.
-
3 gun pistol!
In my opinion for 3 gun you have two options: 1) Buy a higher end hammer fired gun, either a 2011 or a CZ/EAA type gun in single action. 2) Buy a striker fire gun for $600 and shoot the crap out of it. I shoot an M&P because I don't think the gun itself makes that much if a difference as long as it works and it is reasonably accurate. I would say Glock/M&P/XD/whatever you like in that class but I would recommend picking with with good aftermarket support not one of the other 10 with less parts and expertise available. Trigger are are replaceable to almost all of the ones with after market support and you will probably end up doing that regardless of what gun you pick so don't worry to much about initial trigger quality, assume you'll have to replace it anyway.
-
What are ya drinking?
Iwai Japanese Whiskey. Holly crap that is a nice light whiskery, way under-priced for the quality.
-
Shotgun questions from a newbie
Yes, in fact you want to experiment with various chokes and see which one produces the patterned desired, at various ranges. Be aware that each ammo and each choke will perform differnetly so if you change ammo you will have to re-check. Same is true for slugs, do a point. I wouldn't force slugs through a double extra full choke, but I've found that for me slugs are most accurate somewhere between light modified to improved modified, depending on the slug.
-
1x variable scopes.
This one: http://www.vortexoptics.com/product/razor-hd-gen-2-1-6x24-riflescope-with-jm-1-reticle/reticle The 1-6x with the JMB-1 reticle
-
Larry Vickers shoots the AK-107
I'd be curious to try one, but I'm personally not holding my breadth. For one, those guns have good comps on, which are probably doing most of the work (compare the dude's race gun with any other race gun, they all move about just as little, lots of guns stay flat if properly tuned, and if the system was miraculous he probably wouldn't have been running what looks to be a rolling thunder comp or clone). For another every other miracle recoil killer design I've tried seemed to kill recoil but also induce other issues. So, I hope it is somehow very wonderful and clever, but until I see someone putting a few thousands rounds through one in something that isn't basically just an advert, I'm not going to go gaga over it.
-
Anyone else getting weird calls?
I always give away my google voice linked number (which used to be my old personal cell), which forwards to my work cell. Either google does an awesome job of spam filtering or they just don't call me that much, but when they do they have leave their name before I pick up the phone. I'm guessing that screens off a lot of scammers.
-
New Ruger "American" Striker Handgun
I'm actually fairly sure Ruger couldn't care less about VP9 and PPQ but chasing Glock and M&P. In fact that thing looks a LOT like an M&P to my eyes, trigger safety aside. More importantly they read the recent Army, FBI, etc pistol requirements and know what's coming so they are building guns to that spec. On the other hand, they are Ruger so I'll wait for the recall before I even look at one.
-
This drone thing is getting out of hand...
To late. if you fly a drone outside at all, even on your property you now have to register. Even if it is 5" off the ground in the middle of Wyoming on your 1000 acre ranch. Even if it is tethered to the ground. Welcome to government regulation.
-
This drone thing is getting out of hand...
Then I misunderstood you and I apologize. However firing a weapon in the air in a residential area is generally a bad idea. Using lethal force in a non lethal thread situation is generally frowned upon. Not that I don't understand the sentiment, but it seems like a poor approach.
-
This drone thing is getting out of hand...
The thing is, we already have laws covering all this. Why don't we apply them? Trespassing, peeping tom laws, interfering with aircraft, all this shit is already on the books. Instead of regulating a whole new thing from scratch and creating a web of incongruent laws and regulations mostly affected people who aren't bothering anyone, figure out how to apply existing laws. And back to the earlier point, it is no different if they are peeking from their yard or flying over yours, the act is the same. If they fly their drone on their side of the fence the thing you are concerned about is the same. If they are filming your daughter bathing with a drone or a high zoom camera the result is the same. Punish the behaviour not the tool, just like gun control. Look it, there are a million small drone owners out there, some of the not gun owners at all. Should gun owners be running around screaming "ban it!" or should they make friends with anyone else who is at the mercy of random government rule making? Think of the consequences.
-
I want to build an AR 15/m4 need help
For $465 I can get a JP barrel with their matched bolt which will go pretty much against everyone else's barrel. Checko is right, recommending a new-ish shooter (sorry if I'm assuming this, it just sounds that way) to spend $400+ on a barrel is a waste of money. There are a TON of very good barrels in the $200-300 range that will out shoot most shooters for quite some time. When he wears out that one, he will know what he needs to spend on the second one. His initial budget was $600, so I'm going to assume here that he isn't going to hand load match bullets in hand selected LC brass or buy factory match ammo in any kind of quantity so why recommend a barrel that is likely not to be used to its full potential? I'm not trying to insult the OP, actually quite the contrary, I think someone just starting is much better served by a cheapish decent barrel and a better trigger and a lot of ammo.