Everything posted by YWHIC
-
Day #2 at Range 14 in Burlington, NJ
@ j0n... that was last weekend and I didn't see the rules till today.. also a 3" target on the ground is a little hard to see from the booth I guess.. I also shot it at 200 yards.. some guy was shooting stop signs at 200 yards.. so I figured at 100 yards a 3" target don't pose much threat.. again MHO.. Al
-
Day #2 at Range 14 in Burlington, NJ
May as well add the celabatory pic of the rifle setup and the target.. FWIW.. the 4" clays at 100 yards once the red-dot was setup was amazingly easy and fun.. now my AR in 308 did manage in 2 shots to take out a 3" AR500 steel target I had on the ground last weekend.. so suffice to say that is dialed-in.. IMHO.. at 100 yards the 3" targets were easy pickins as well.. Al
-
Range 14 Open Father's Day
I left just before 10am as I ran out of ammo.. I was banging clays at 100 yards today and got my T red-dot sighted in along with the MagPul MBUS set.. shot at 200 yards and got like 7" groups.. but considering the DOT is 3MOA @ 100 and 6" at 200.. I think I did pretty good. I ordered 400 more rounds of PMC X-Tac 55gr FMJ to come in this week for next weekend.. maybe we can try again next weekend. Al
-
Day #2 at Range 14 in Burlington, NJ
Much better day today.. I ran only the Federal AE 223 55gr FMJ.. Range was busier than normal.. alot of father & son /or daughter time.. Rifle is DPMS 5.56 Oracle with 16" Lite Barrel and A3 Flat-Top.. DPMS Miculek Brake (pinned), and C-Product 20 Mags (pinned to 14), and Bushnell Red Dot (Tactical model with T and 3 MOA center dot).. using front Caldwell BAG for rest.. At 100 yards sighting in the 3MOA red dot.. then some 4" CLAY action at 100 yards.. then last volley of 10 rounds at 100 yards.. then 5 shots at 200 to see what would happen.. (red dot is like 6" at 200 yards). Overall a good Fathers Day for me.. Al
-
How to pin a MAG to 10 or 15 rounds for NJ.??
Anyone else have a preferred way to do-it-themselves??
-
was @ Range 14 today for some fun..
Went to Range 14 in Burlington NJ for some quick 1 hour of fun with my AR.. (neutered for NJ compliance).. Brake, Mags, etc.. :thsmiley_deadhorse: I shot 80 rounds of the Federal AE 223 FMJ ammo with 0 issues.. the Wolf Mil-Classic 223 FMJ all problems.. shot 1 1/2 boxes (full of FTF/FTE).. had the last Wolf round EXPAND so much in the chamber I had to use a cleaning rod to remove it.. I had few get stuck before that.. but NO I had to keep going.. (sold the Wolf already on an AK forum).. ordered some PMC XTAC 55gr FMJ for $6.19/box from SGammo to replace the Wolf.. Going again tommorrow to shoot the other 80 rounds of the Federal AE and get the Red Dot zero'd abit.. (sitting @ 3 inches high at 100 yards) Al
-
Range 14 Open Father's Day
maybe me at 8am sharp.. Al
-
Range 14 Open Father's Day
just called.. they said YES
-
How to pin a MAG to 10 or 15 rounds for NJ.??
guessing for that base you'd have to bend all 4 tabs UP then install.. then rivet on both sides like the mags you sell?? do you have any in stock??
-
How to pin a MAG to 10 or 15 rounds for NJ.??
post is asked for PEOPLE not from NJ.. but coming into NJ to shoot.. Al
-
How to pin a MAG to 10 or 15 rounds for NJ.??
How would YOU pin a mag for 10 or 15 rounds for NJ usage?? I just bought 2 D&H 10 round mags and called it done. (I know a forum sponsor sells AR mags also for NJ).. I recently dabbled with my 2 cheap 20 round mags for NJ use also ended up at just 14 rounds each.. which works for me.. I only load 10 anyway.. as ammo isn't cheap and gives me time to check the target groupings.. I heard a rivet on the spine (to limit the mag follower) and 2 rivets in the bottom plate would suffice..?? what DO YOU folks do?? I know recently standard BLOCKING was deemed not good anymore..
-
my $570 DPMS 5.56 Oracle..
also ordered some plain 10 round D&H Mags w/magpul followers to go with it from Eagle Armory for $12.25 each.. decided to leave the 30 round mags alone (and in PA).. the C-Products 20's I did PIN to 15 rounds.. don't want NO HASSLES whilst in NJ.. Al
-
my $570 DPMS 5.56 Oracle..
DPMS 5.56 Oracle with A3 Upper and Low Gas Block w/rail 16" 4140 Chrome-Moly Lite Barrel, Mil-Spec Bolt Carrier, 5.56 Chamber w/feedramps.. $570 from Surplus Ammo & Arms (the lower people) (cell pic) The accessories.. (just put them on..) Hogue Pistol Grip, MagPul MBUS Set, UAG Quad Rail, Miculek Brake, Bushnell Trophy 1x32 Red Dot with 'T' Reticle.. 2 C-Products 20 Round Mags, 2 DPMS 30 Round Mags.. $307 for the accessories w/shipping. **I am pinning the mags to 15 rounds.. Stock has been pinned also.. Brake going to be pinned PRIOR to me coming into NJ to shoot it.. (I live in PA) Also got 160 rounds of Federal AE 55gr FMJ (on sale for $6/box) and 500 rounds of Wolf Mil-Classic 55gr FMJ for $115 shipped from Copes.. All ready to go now... Al
-
Fort Dix
I emptied a 7 round mag on my 22lr Marlin.. and I barely noticed.. They also have like 10 Pistol only tables to the LEFT.. which are separate from the 15 lanes for rifle (which is like stated above is 200 yards).. Rifle range is marked off at 25, 50, 100, 150, 200 you get a bench with a roof, and 1 PAD on each side for prone or whatever shooting.. you can shoot shotgun on the rifle range.. (clean up your hulls though) horrible cell pic from last Saturday.. my targets are at 100 and 200 yards. I go every other weekend usually.. I shoot clays on the little 'rooster' posts.. I do have some small 3" steel AR500 I shoot out at 200 yards also.. Al
-
Transporting to house and weekend house
based on what I read on the internet of course.. and you propose a NJ cop having a BAD DAY would make your day be just fine.. refer to above post/er about spending time in the pokey while judge sorts it out..
-
Flash Hiders in NJ??
@vjf915.. I am a PA resident.. not currently a NJ resident.. I just happen to shoot at Range 14.. hence everytime I get something I make sure I can make it NJ legal/compliant.. such as pinning and mag limits.. I used to live in NJ from 1983-2005 so I know the NJ laws are stinky.. Back in 2002 I lived in North Brunswick and got a deal thru a fellow NJ forum member from another board.. hence the purchase of the Bushmaster from Southern NJ.. I as a NJ resident have bought several rifles/pistols since 1991 when I turned 21.. I still keep my old NJFID card in my range bag.. just in case.. figure it can't hurt to have it.. Regards, Al
-
Transporting to house and weekend house
I just meant TRANSPORT to and from range.. Title 18, Section 926A I did not say you didn't state it.. I was making it PLAIN ENGLISH.. Al
-
Transporting to house and weekend house
Um.. going from a PA household to NJ to shoot with firearm in trunk per Title 18 is not illegal however.. So yes you are correct.. he cannot legally/technically bring a gun to his uncles house in NJ.. then go shoot the next day.. Best bet is go straight to the range and go back home.. Also GAS STOPS with firearms in your trunk in NJ is a no-no also.. :thsmiley_deadhorse:
-
Flash Hiders in NJ??
@Maksim... no, I was just recalling what I was sold back in 2002.. saying a 14.5" Bushmaster could not have had a WELDED Flash Hider on from the factory would also not always be true either though.. I was asking opinions of the board as to what I should do.. not what they may or may not have done on there rigs.. FWIW.. I resolved the issue already.. I ordered the same DPMS Miculek Brake that I currently have on my 308 and just PIN it when it gets here. (like on my 308). figured why tempt fate in the Garden State..
-
Flash Hiders in NJ??
I know your not supposed to have flash hiders in NJ.. but how does certain Bushmasters (AR) and other rifles sold in NJ have them?? I know my Bushmaster with 14.5" bbl had a welded FHider when I bought it back in 2002 from Brick Armory or SureShot.. I assume they are WELDED or PINNED on by either the dealer or the factory.. If said A2 Birdcage is Welded/Pinned is it allowed?? Chime in.. I can buy a brake and PIN it.. but I have a rifle coming in with an A2 (to my PA FFL) and want to know what YOU would do?? Buy a Brake and PIN it... or just pin the A2 and be done??
-
red dot sights
My experiance on my Saiga/AK variants.. Bushnell TRS25 4 MOA Dot Primary Arms M3 3 MOA Dot Bushnell 28mm tube 73-0131 6MOA dot Bushnell 73-0134 with 4 different reticles. All worked great on my 762x39 Saiga.. if I didn't like I was able to recoup 80%+ of the money spent to upgrade later.. just ordered the Bushnell 1x32 P model with T dot.. $136.. (3 MOA dot with T hair) for my incoming DPMS 5.56 carbine..
-
AR pics, lets see'um!
Hi.. New guy here and my 3rd post.. DPMS LR-308 with A3 and 16" Heavy Barrel.. Nikon 4-12x40 BDC, MI Front, MGPul Rear, Hogue Grip.. MPul 20 rounders PINNED to 15 for NJ compliance.. DPMS Miculek Brake PINNED Now riding in a Desert Camo Paint Scheme..
-
welding pinning muzzle brake?
I pinned my Saiga 308 like this.. Drill hole in bottom of brake (in a vise).. then screw it on.. to proper spot.. drill JUST a dimple a HAIR into the bbl.. then remove the BRAKE.. then thread the BRAKE with SMALL TAP set from Lowes $6.... then screw in the allen head cap screw $1 from HD or Lowes(with RED loctite). then CUT off the screw head flush.. Little weld on top if desired and DONE..
-
MOST beginner friendly range in central nj/east pa?
gunnarsport.. I'll be going out to Range 14 in 2 weeks (on Sat or Sunday)to shoot my incoming 5.56 DPMS.. if you want a intro-class (aka on the spot tutorial) and then shoot my Sig pistol you are more than welcome to join me for $3/hour.. as a guest.. I can give you the Basic Pistol book FREE.. I usually get there at 8am.. PM me.. Al
-
Fun Range Day.. 308 and 22 LR @ Range 14
I went down to Ft. Dix Range 14 yesterday @ 8am.. Took along my neutered DPMS LR-308 and my Marlin Papoose for some fun.. met a guy from here at the range.. hence me signing up.. Rifle.. DPMS LR-308 (Desert Paint Scheme) with A3 and 16" Heavy Bbl and Miculek Brake..(pinned).. using MagPul PINNED 15 round LR20 Mags.. and a Nikon 4-12x40 BDC scope.. Range 14 has 15 tables @ 200 yards of fun.. $60 per year and just $3/hour.. Here is me and my MBUS sites at 50 yards. Here is the 308 @ 100 yards with a unique CLAY shot Here is the Marlin 22 LR at 100 yards.. Here is the 308 at 200 yards.. with cheap Brown Bear 145gr FMJ ammo.. The target is a reduced QIT target.. the HEAD is 5" wide for reference.. also shot my little AR500 3" diameter targets at both 100 and 200 yards.. got them off EB for $5 each (qty of 3 or more) from qualitytargets.. (you got to PM them and request AR500 steel.. not the std AP36 ones they sell...) here is a 200 yard group with Hornady ammo.. (the circle is 4" diameter.. group measured to 1 5/8" ) which is SUB MOA for 200 yards.. Overall a great day.. Be going back out in 2 weeks with the new incoming DPMS 5.56 ORC I snagged for $570..