Everything posted by YWHIC
-
Ordered a PSA Hammer Forged 16"
Got the upper in today.. they left the A2 loose for me.. (as requested) and installed a low-pro gas block (for later upgrades) vs. the std FSB.. (free) Barrel is marked.. 5.56 NATO 1/7 CHF CL PALMETTO DPMS Upper on DPMS Lower.. and PSA 16" M4 Hammer Forged Upper. Mil-Spec BCG.. and then decked out a little bit.. with new YHM 5M1 brake.. VERY HAPPY thus far with the upgrade..
-
Ordered a PSA Hammer Forged 16"
Well the upper is almost here.. had some free time today (after doing all 4 brakes on my car) found my Aervoe paint in Field Drab (aka old style mil-brown).. [i wanted different other then std MagPul colors.. ] and the factory stock.. (note PIN hole for pinning) UPS has my package for my upper and will be here Monday.. yeah..
-
welding pinning muzzle brake?
Option B ^^^^^ and Follow up.. these are the allen head Set screws that are 8-32 x 3/16".. TINY.. $.68/2 @ Hdepot. Crown SKU 030699731480 drill the hole in the BRAKE (off rifle) with #29 bit.. put on align brake on the rifle to where you want it.. drill a notch in the barrel.. then remove the BRAKE.. TAP the brake with 8-32 TAP.. then thread in one of these screws with BRAKE re-mounted.. then drop a weld on top of screw.. (Others have THREADED the Cav Comp hole and also threaded and screwed..) Also note Lowes sells the 8-32 Tap & #29 Drill bit kit for like $6.. IRWIN Brand...
-
Ordered a PSA Hammer Forged 16"
PSA said it will be shipping today with the minor changes I asked.. Going to order the YHM 5M1 Brake.. Will post pics soon..
-
AR pics, lets see'um!
Thanks.. the base rifle was $1020 NEW.. then I added the Magpul MBUS (rear) and MI (front).. wrapped the FACTORY Aluminum FF with Desert 550 cord.. Paint was Aervoe brand and can be bought either in a KIT for like $60.. or just cans for like $6.80 each.. I went with the USMC desert colors and also Krylon Olive (for underlying darkening).. this this is MUCH better looking in sunlight.. Heres another shot while paint was fresh.. In the middle of doing it.. (see the green sponge) Some other pics from that hour... The paint..
-
Captain pushing for me to buy rifle
Get your FID card in-hand.. and when picking up, tell the GIRL you'd like a PP application form.. fill it out ON THE SPOT, and give a wink and ask how long will it take since you just obviously got your FID from her.. sometimes the GREASE helps..
-
Second thoughts about going to the range with an acquaintance
I agree on the 1-1 training/shooting session.. you can tell if he/she shoots if LIMP WRIST it and does a FTF or FTE then you can HELP him/her.. I have a 21 at work like that.. wants to go every weekend.. and then backs out.. I got tired of it and just told him when he gets HIS OWN rifle/pistol and BUYS ammo.. WE can go.. I offered 3 times and then thought about the ammo and the $$ for it.. ugh..
-
Ordered a PSA Hammer Forged 16"
Tossing up the Cav Comp with PIN drilled.. or the other YHM 5M1.. The Miculek Brake gives a THUMP also.. brother in law had to BACK AWAY from the table.. May order a YHM Lightweight or Diamond FF Quad also.. both are sub-$120.. (may as well dive in).. Also looking at the MagPul MOE in Foliage to match the other components I got.. AR's = like Barbies.. dress them up..
-
Ordered a PSA Hammer Forged 16"
rumor has it.. that BCM will leave the Flashider OFF.. but thats about it.. the fact PSA will change the GB to a low-pro, and leave the FHider OFF also for FREE is even better.. IMHO. The reason I went low-pro was to eventually install a FF tube down the line without the hassle involved.. there going to ship it like this with the Delta Pack and End Cap still on so I can run my current Carbine Quad.. When I need.. I can either just cut the delta pack/end cap off and install over the low-pro GB (some FF tubes do that), or remove the GB up to the end of the barrel, install the FF tube (which should slide over the small Brake and gas-block), slide the LP Gas-Block back into place and done.. either way I'll be GTG. Definately keep you all posted..
-
Ordered a PSA Hammer Forged 16"
I sold my DPMS 5.56 upper for $385.. Bought a new PSA 16" Hammer Forged FN Upper for $499 with BCG/CH 1/7, Mil-Spec, etc.. Also ordering a Cav Comp A2 Brake, YHM Phanton Brake, or the Miculek Brake (like I had pinned on my DPMS and 2 other rifles).. still unsure of which one to get for it Will report back when I get it in 'hand' PSA said (via forum post) they will subtitute the std A2 front sight to a low pro gas block for me.. and leave the A2 Fhider in a baggie and not installed.. this will make the Brake install abit easier.. just said put it in the notes what I want.. **BCM said they can't on the 16" do anything special.. Al
-
Range Report @ Range 14 today
Yes. its the Bushnell Trophy 1x32 with T Dot.. (dot is 3MOA) in center top of T. Al
-
Rudeness at CMO
I bought my Caldwell bag from them and my soft-case for my Saiga last fall with 0 issues.. also bought ammo there as well for my 308 Saiga with 0 issues.. you just got to go in, BUY, and get out.. I bought a 380ACP Makarov back in 1995 from Harrys (my 1st pistol also) and service was GREAT.. IMHO.. they did have the standard Saiga 12 in there last August..
-
What is happening to BA?
I shoot down at Range 14 every other weekend with my Saiga AK variants and AR's with 0 issues.. I see ALOT of people with AR's and WASR's also (all NJ compliant) They have simple rules.. but at 200 yards for $3/hour and only a $60 annual fee you can't really beat it.. they let you shoot PLASTIC bottles (clean them up) and steel out at 200 yards.. I dunno.. they seem good to me..
-
Explain your avitar!
my rifles.. had a pic of me in a Balaclava holding an AK.. then thought about it..
-
Moving to a new city
Most are.. IMHO.. seems like whenever you move you got AT LEAST another round of waiting and ALL THE FEES again.. even though 1/2 of that is just BS.. gotta pay to play.. ughh..
-
RAA Saiga 5.56
RAA is not really importing them.. its been a mix of Mercury Hermes, TN Guns, etc.. I saw one at Cheyanne Outfitters (Harrys) a few months back.. $$$$ PK90 has one ^^^^^^^
-
Range Report @ Range 14 today
Today at the Range 14.. @ 8:30am.. 100 yards with 3MOA Red Dot.. 4" x 5 3/4".. with front BAG rest. Volley #1 with just IRONS at 100 yards.. (a little LEFT).. with front BAG rest. Volley #2 withh just IRONS at 100 yards (with adjustment).. 5" x 7" w/front BAG rest. 100 yards kneeling on 1 knee.. with the 3MOA Red Dot.. COM'd.. 200 yards with Red Dot (which is 6" at 200 yards).. 6" x 9".. w/front BAG rest..
-
Range Report @ Range 14 today
After practicing kneeling and someone mentioning my pistol.. I am a RIGHTY.. so the SAW200 pack is now moved to the REAR about 7pm.. Also I cut off the 'excess' front FLAP 'catch' it was blocking my GRAB. The Flaps themselve REMOVE (with velcro from the inside the pouch).. I removed them also.. now the mags fit a little better also without rubbing all the extra material from the FLAPS.. Thanks..yeah I might grab some TT stuff down the road.. I am still tweaking what I want.. Al
-
Range Report @ Range 14 today
No I wore a small 2 mag pouch that goes on a Belt with a spring clip.. Worked well for 2 (20/15) mags both kneeling and standing.. Shot 120 rounds in the first 15 minute session.. thing was smoking at first from the oil.. Going to bring the FLC/RIG tommorrow and try it for weight.. but I don't have the MagPuls in yet.. so I will have the 15/20's propped up.. Al
-
Range Report @ Range 14 today
Here is a 500 yard SIM target (torso is 2" x 3") for 50 yard usage.. 8 for 20 rounds.. Not bad though for IRONS.. and NOT slow firing.. IMHO.. Going to try again tommorrow in the AM.. @ 100 and 200 yards.. This ought to be fun.. >>>>>>
-
Range Report @ Range 14 today
Well today was a good day at Range 14.. got there @ 8am and met 2 nice guys today also shooting AR's.. I mentioned these forums to them also.. Took my DPMS Oracle 5.56 and 260 rounds of 5.56 and .223 ammo.. I shot the DPMS both standing and kneeling with just IRONS and the Bushnell Red Dot (3moa).. No bag today.. just banging away.. I also banged 4" clays at 50 and 75 yards.. The targets are REDUCED FBI QIT with 12" Torso at widest point.. 50 yards and 100 yards.. some 100 yard Red Dot (@ the 8" shoot-n-see.. by 220 rounds I was getting tired I think) If the shots look LOW they are.. I am sighted in for 200 yards on this AR.. Al
-
FLC Vest or Ranger-Rack Molle Rig??
Actually the LR-308 will be slung on the back in a SHTF scenerio.. hence the balance.. Also found a Blackhawk 40oz hydration pack on sale from CTD.. which I may order.. The SAW 200 pack will more than likely moved to the back and some ammo and med-kit in it with 8x8 tarp and other gear.. There is MOLLE on the back of the vest on the 'belt'.. That will balance.. I may change the dbl depth 556 mag pouch to a USGI 3 mag holder also.. Al
-
FLC Vest or Ranger-Rack Molle Rig??
Thanks.. Its pretty even.. the 4-15 round 308 mags weigh only slightly more than the 6-15 AR15 mags.. I was able to put almost 10 lbs of ammo in the SAW pouch.. but that was a little I can't see me going 'prone' with the double THICK pouches.. I shoot from Kneeling pretty good though..
-
FLC Vest or Ranger-Rack Molle Rig??
Here is the RIG setup as I like it.. 6 - 20/15 round 223/5.56 mags (magpuls on way) 4 - 20/15 round 308/762 mags 2 - 9mm mags for my Sig Pro 2022 1 - Frag Pouch holding some 550 cord currently.. soon to have flint/matches/cell 1 - SAW 200 pouch holding AIR.. soon to have med-kit, 8x8 tarp, whatever, xtra ammo.. Weighs at 12 Lbs.. fully loaded up.. Total was $6 for the vest.. $51 and $12 for the pouches.. under $80..
-
Going to Range 14 Saturday @ 8am
I may be going again tommorrow at 8am.. or 10am.. rain permitting..